Note: Development of this binding has been put on hold for the forseeable future. Pull requests are welcomed, however.

Ring

This is an experimental binding to the Ring.com API. It currently supports a Ring account and is able to discover Ring Video Doorbells and Chimes. They need to be registered in the Ring account before they will be detected.

It currently does not support live video streaming, but you can view recorded video's, if this service is enabled in the Ring account.

Supported Things

The binding currently supports Ring Video Doorbell and Chimes.

Discovery

Auto-discovery is applicable to this binding. After (manually) adding a Ring Account thing, registered doorbells and chimes will be auto discovered.

Binding Configuration

There is binding configuration necessary. The easiest way to do this is from the Paper UI. Just add a new thing, select the Ring binding, then Ring Account Binding Thing, and enter username and password. Optionally, you can also specify a unique hardware ID and refresh interval for how often to check ring.com for events. If hardware ID is not specified, the MAC address of the system running OpenHAB is used.

Channels

Control group (all things):

Channel Type ID	Item Type	Description
Enabled	Switch	Enable polling of this device/account

Events group (Ring Account Binding Thing only):

Todo: Move these to the device thing

Channel Type ID	Item Type	Description
URL to recorded video	String	The URL to a recorded video (only when subscribed on ring.com)
When the event was created	DateTime	The date and time the event was created
The kind of event	String	The kind of event, usually 'motion' or 'ding'
The id of the doorbot	String	The internal id of the doorbot that generated the currently selected event
The description of the doorbot	String	The description of the doorbot that generated the currently selected event (e.g. Front Door)

Device Status (Video Doorbell Binding Thing and Stickup Cam Binding Thing only):

Channel Type ID	Item Type	Description
Battery level	Number	Battery level in %

Full Example

NOTE 1: Replace <ring_device_id> with a valid ring device ID when manually configuring. The easiest way to currently get that is to define the account thing and pull the device ID from the last event channel.

NOTE 2: Text configuration for the Things ONLY works if you DO NOT have 2 factor authentication enabled. If you are using 2 factor authentication, Things MUST be set up through PaperUI

ring.things:

ring:account:ringAccount "Ring Account"     [ username="user@domain.com", password="XXXXXXX", hardwareId="AA-BB-CC-DD-EE-FF", refreshInterval=5 ]
ring:doorbell:<ring_device_id>          "Ring Doorbell"    [ refreshInterval=5, offOffset=0 ]
ring:chime:<ring_device_id>             "Ring Chime"       [ refreshInterval=5, offOffset=0 ]
ring:stickup:<ring_device_id>           "Ring Stickup Camera"       [ refreshInterval=5, offOffset=0 ]

ring.items:

Switch     RingAccountStatus              "Ring Account Status"             { channel="ring:account:ringAccount:control#status" }
Switch     RingAccountEnabled             "Ring Account Polling Enabled"    { channel="ring:account:ringAccount:control#enabled" }
String     RingEventVideoURL              "Ring Event URL"                  { channel="ring:account:ringAccount:event#url" }
DateTime   RingEventCreated               "Ring Event Created"              { channel="ring:account:ringAccount:event#createdAt" } 
String     RingEventKind                  "Ring Event Kind"                 { channel="ring:account:ringAccount:event#kind" }
String     RingEventDeviceID              "Ring Device ID"                  { channel="ring:account:ringAccount:event#doorbotId" }
String     RingEventDeviceDescription     "Ring Device Description"         { channel="ring:account:ringAccount:event#doorbotDescription" }

Switch     RingDoorbellStatus             "Ring Doorbell Status"            { channel="ring:doorbell:<ring_device_id>:control#status" }
Switch     RingDoorbellEnabled            "Ring Doorbell Polling Enabled"   { channel="ring:doorbell:<ring_device_id>:control#enabled" }
Number     RingDoorbellBattery            "Ring Doorbell Battery [%s]%"     { channel="ring:doorbell:<ring_device_id>:status#battery"}

Switch     RingChimeStatus                "Ring Chime Status"               { channel="ring:chime:<ring_device_id>:control#status" }
Switch     RingChimeEnabled               "Ring Chime Polling Enabled"      { channel="ring:chime:<ring_device_id>:control#enabled" }

Switch     RingStickupStatus             "Ring Stickup Status"            { channel="ring:stickup:<ring_device_id>:control#status" }
Switch     RingStickupEnabled            "Ring Stickup Polling Enabled"   { channel="ring:stickup:<ring_device_id>:control#enabled" }
Number     RingStickupBattery            "Ring Stickup Battery [%s]%"     { channel="ring:stickup:<ring_device_id>:status#battery"}