_adb

#compdef adb
# ------------------------------------------------------------------------------
# Copyright (c) 2011 Github zsh-users - http://github.com/zsh-users
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the zsh-users nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# ------------------------------------------------------------------------------
# Description
# -----------
#
#  Completion script for adb (Android Debug Bridge) 1.0.26
#  (http://developer.android.com/guide/developing/tools/adb.html).
#
# ------------------------------------------------------------------------------
# Authors
# -------
#
#  * Julien Nicoulaud <julien.nicoulaud@gmail.com>
#
# ------------------------------------------------------------------------------
# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
# vim: ft=zsh sw=2 ts=2 et
# ------------------------------------------------------------------------------


typeset -A opt_args
local context state line curcontext="$curcontext" adb_args

_adb() {
  local ret=1

  _arguments -C \
    '(-e -s)-d[directs command to the only connected USB device, returns an error if more than one USB device is present]' \
    '(-d -s)-e[directs command to the only running emulator, returns an error if more than one emulator is running]' \
    '(-d -e)-s[directs command to the USB device or emulator with the given serial number]: :_adb_serial_numbers' \
    '-p[simple product name or a relative/absolute path to a product out directory]: :_adb_products' \
    '1: :_adb_cmds' \
    '*::arg:->args' \
  && ret=0

  adb_args="${(fkv)opt_args[(I)-d|-e|-s|-p]}"

  case "$state" in
    (args)
      curcontext="${curcontext%:*:*}:adb-cmd-$words[1]:"
      case $words[1] in
        (help|version|devices|jdwp|bugreport|wait-for-device|start-server|kill-server|get-state|get-serialno|status-window|remount|reboot-bootloader|root|usb)
          _message 'no more arguments' && ret=0
        ;;
        (connect|disconnect)
          _arguments \
            '1: :_adb_host_colon_ports' \
          && ret=0
        ;;
        (push)
          _arguments \
            '1:local directory:_files -/' \
            '2: :_adb_remote_files -/' \
          && ret=0
        ;;
        (pull)
          _arguments \
            '1: :_adb_remote_files -/' \
            '2:local directory:_files -/' \
          && ret=0
        ;;
        (sync)
          _arguments \
            '-l[list but do not copy]' \
            '1: :_adb_sync_directories' \
          && ret=0
        ;;
        (shell|emu)
          _arguments -C \
            '1: :_adb_remote_commands' \
            '*::remote-command-arg:->remote-command-args' \
          && ret=0
          case "$state" in
            (remote-command-args)
              if (( $+functions[_adb_remote_command_$words[1]_args] )); then
                _adb_remote_command_$words[1]_args && ret=0
              else
                _wanted remote-files expl 'remote file' _adb_remote_files && ret=0
              fi
            ;;
          esac
        ;;
        (logcat)
           local -a rotation_opts
           [[ -n ${(M)words:#"-f"} ]] && rotation_opts+=('-r[rotates the log file every kbytes of output. The default value is 16]:value (in kb)')
           [[ -n ${(M)words:#"-r"} ]] && rotation_opts+=('-n[sets the maximum number of rotated logs. The default value is 4]:count')
          _arguments \
            '-b[loads an alternate log buffer for viewing, such as event or radio. The main buffer is used by default]: :_adb_logcat_buffers' \
            '-c[clears (flushes) the entire log and exits]' \
            '-d[dumps the log to the screen and exits]' \
            '-f[writes log message output to file. The default is stdout]: :_files' \
            '-g[prints the size of the specified log buffer and exits]' \
            '-s[sets the default filter spec to silent]' \
            '-v[sets the output format for log messages]: :_adb_logcat_output_formats' \
            "${rotation_opts[@]}" \
            '*: :_adb_logcat_filter_specs' \
          && ret=0
        ;;
        (forward)
          _arguments \
            '1: :_adb_local_forward_specs' \
            '2: :_adb_remote_forward_specs' \
          && ret=0
        ;;
        (install)
          _arguments \
            '-l[forward-lock the app]' \
            '-r[reinstall the app, keeping its data]' \
            '-s[install on SD card instead of internal storage]' \
            '1: :_files' \
          && ret=0
        ;;
        (uninstall)
          _arguments \
            '-k[keep the data and cache directories]' \
            '1: :_adb_packages' \
          && ret=0
        ;;
        (reboot)
          _arguments \
            '1:program:((bootloader:reboot\ into\ the\ bootloader\ program recovery:reboot\ into\ the\ recovery\ program))' \
          && ret=0
        ;;
        (tcpip)
          _arguments \
            '1::port' \
          && ret=0
        ;;
        (ppp)
          # TODO Complete tty (See http://developer.android.com/guide/developing/tools/adb.html#commandsummary)
          # TODO Complete PPP parameters (See http://ppp.samba.org/pppd.html)
          _arguments \
            '1::tty' \
            '*::parameters' \
          && ret=0
        ;;
      esac
    ;;
  esac

  return ret
}

(( $+functions[_adb_cmds] )) ||
_adb_cmds() {
  _alternative \
    'general-commands:general command:_adb_general_cmds' \
    'device-commands:device command:_adb_device_cmds' \
    'scripting-commands:scripting command:_adb_scripting_cmds'
}

(( $+functions[_adb_general_cmds] )) ||
_adb_general_cmds() {
  local commands; commands=(
    'help:show help message'
    'version:show version number'
    'devices:list all connected devices'
    'connect:connect to a device via TCP/IP'
    'disconnect:disconnect from a TCP/IP device'
  )
  _describe -t general-commands 'general command' commands "$@"
}

(( $+functions[_adb_device_cmds] )) ||
_adb_device_cmds() {
  local commands; commands=(
    'push:copy file/dir to device'
    'pull:copy file/dir from device'
    'sync:copy host->device only if changed'
    'shell:run remote shell interactively or command'
    'emu:run emulator console command'
    'logcat:view device log'
    'forward:forward socket connections'
    'jdwp:list PIDs of processes hosting a JDWP transport'
    'install:push this padbage file to the device and install it'
    'uninstall:remove this app padbage from the device'
    'bugreport:return all information from the device'
  )
  _describe -t device-commands 'device command' commands "$@"
}

(( $+functions[_adb_scripting_cmds] )) ||
_adb_scripting_cmds() {
  local commands; commands=(
    'wait-for-device:block until device is online'
    'start-server:ensure that there is a server running'
    'kill-server:kill the server if it is running'
    'get-state:prints\: offline | bootloader | device'
    'get-serialno:prints\: <serial-number>'
    'status-window:continuously print device status for a specified device'
    'remount:remounts the /system partition on the device read-write'
    'reboot:reboots the device, optionally into the bootloader or recovery program'
    'reboot-bootloader:reboots the device into the bootloader'
    'root:restarts the adbd daemon with root permissions'
    'usb:restarts the adbd daemon listening on USB'
    'tcpip:restarts the adbd daemon listening on TCP on the specified port'
    'ppp:run PPP over USB'
  )
  _describe -t scripting-commands 'scripting command' commands "$@"
}

(( $+functions[_adb_products] )) ||
_adb_products() {
  _alternative \
    'product-names:product name:_adb_product_names' \
    'directories:directory:_files -/'
}

(( $+functions[_adb_product_names] )) ||
_adb_product_names() {
  local ret=1
  if [[ -n "$ANDROID_PRODUCT_OUT" ]]; then
    local product_names; product_names=("$ANDROID_PRODUCT_OUT:default value set in ANDROID_PRODUCT_OUT environment variable")
    _describe -t product-names 'product name' product_names && ret=0
  else
    _message -e product-names 'product name' && ret=0
  fi
  return ret
}

(( $+functions[_adb_serial_numbers] )) ||
_adb_serial_numbers() {
  local serial_numbers; serial_numbers=(${${(M)${(f)"$(adb devices)"}:#*device}%%[[:space:]]*}":connected device")
  [[ -n "$ANDROID_SERIAL" ]] && serial_numbers+=("$ANDROID_SERIAL:default value set in ANDROID_SERIAL environment variable")
  _describe -t serial-numbers 'serial number' serial_numbers "$@" && ret=0
}

(( $+functions[_adb_packages] )) ||
_adb_packages() {
  local packages; packages=($(_call_program packages $service $adb_args shell 'ls /data/data 2>/dev/null'))
  _multi_parts . packages
}

(( $+functions[_adb_host_colon_ports] )) ||
_adb_host_colon_ports() {
  local ret=1
  if compset -P '*:'; then
    _message -e ports 'port' && ret=0
  else
    _wanted hosts expl 'host' _hosts -qS: && ret=0
  fi
  return ret
}

(( $+functions[_adb_remote_files] )) ||
_adb_remote_files() {
  local dirsonly command="ls -d ${(S)words[CURRENT]/\/*//}*/ 2>/dev/null"
  zparseopts -D -E '/=dirsonly'
  (( ! $#dirsonly )) && command+="; ls -d ${words[CURRENT]}* 2>/dev/null"
  local files; files=($(_call_program files $service $adb_args shell "'$command'"))
  _multi_parts "$@" / files
}

(( $+functions[_adb_remote_commands] )) ||
_adb_remote_commands() {
  local commands; commands=($(_call_program packages $service $adb_args shell "'IFS=:;for path_dir in \$PATH; do ls \$path_dir 2>/dev/null; done'"))
  _describe -t remote-commands 'remote command' commands && ret=0
}

(( $+functions[_adb_local_forward_specs] )) ||
_adb_local_forward_specs() {
  local ret=1
  if compset -P '*:'; then
    case ${IPREFIX%:} in
      (tcp)
        _message -e ports 'port' && ret=0
      ;;
      (localabstract|localreserved)
        _wanted sockets expl 'socket' _socket && ret=0
      ;;
      (localfilesystem)
        _wanted socket-files expl 'socket file' _files && ret=0
      ;;
      (dev)
        _wanted devices expl 'device' _files -g "/dev/**" && ret=0
      ;;
    esac
  else
    local modes; modes=(
      'tcp:TCP socket'
      'localabstract:local abstract socket'
      'localreserved:local reserved socket'
      'localfilesystem:local filesystem socket'
      'dev:device'
    )
    _describe -t forward-modes 'forward mode' modes -qS: && ret=0
  fi
  return ret
}

(( $+functions[_adb_remote_forward_specs] )) ||
_adb_remote_forward_specs() {
  local ret=1
  if compset -P '*:'; then
    case ${IPREFIX%:} in
      (tcp)
        _message -e ports 'remote port' && ret=0
      ;;
      (localabstract|localreserved|localfilesystem)
        _message -e sockets 'remote socket' && ret=0
      ;;
      (dev)
        _message -e devices 'remote device' && ret=0
      ;;
      (jdwp)
        local pids; pids=($(_call_program pids $service $adb_args jdwp))
        _describe -t remote-pids 'remote pid' pids && ret=0
      ;;
    esac
  else
    local modes; modes=(
      'tcp:TCP socket'
      'localabstract:local abstract socket'
      'localreserved:local reserved socket'
      'localfilesystem:local filesystem socket'
      'dev:device'
      'jdwp:Java Debug Wire Protocol'
    )
    _describe -t forward-modes 'forward mode' modes -qS: && ret=0
  fi
  return ret
}

(( $+functions[_adb_sync_directories] )) ||
_adb_sync_directories() {
  _alternative \
    'partitions:partition:((system:the\ /system\ partition data:the\ /data\ partition))' \
    'directories:directory:_adb_remote_files -/'
}

(( $+functions[_adb_logcat_filter_specs] )) ||
_adb_logcat_filter_specs() {
  local ret=1
  if compset -P '*:'; then
    local priorities; priorities=(
      'V:verbose (lowest priority)'
      'D:debug'
      'I:info'
      'W:warning'
      'E:error'
      'F:fatal'
      'S:silent (highest priority, on which nothing is ever printed)'
    )
    _describe -t log-priorities 'log priority' priorities "$@" && ret=0
  else
    local tags; tags=(${(u)${${(f)"$(_call_program tags $service $adb_args logcat -d)"}%%[[:space:]]#\(*}##*\/})
    _describe -t log-tags 'log tag' tags -qS: "$@" && ret=0
  fi
  return ret
}

(( $+functions[_adb_logcat_output_formats] )) ||
_adb_logcat_output_formats() {
  local formats; formats=(
    'brief:display priority/tag and PID of originating process (the default format)'
    'process:display PID only'
    'tag:display the priority/tag only'
    'thread:display process:thread and priority/tag only'
    'raw:display the raw log message, with no other metadata fields'
    'time:display the date, invocation time, priority/tag, and PID of the originating process'
    'long:display all metadata fields and separate messages with a blank lines'
  )
  _describe -t log-formats 'log format' formats "$@" && ret=0
}

(( $+functions[_adb_logcat_buffers] )) ||
_adb_logcat_buffers() {
  local buffers; buffers=(
    'main:view the main log buffer (default)'
    'radio:view the buffer that contains radio/telephony related messages'
    'events:view the buffer containing events-related messages'
  )
  _describe -t log-buffers 'log buffer' buffers "$@" && ret=0
}

_adb "$@"