Skip to content

Latest commit

 

History

History
1036 lines (852 loc) · 53.2 KB

CHANGELOG.md

File metadata and controls

1036 lines (852 loc) · 53.2 KB
Raw

Changelog

5.6.0 (2020-12-14)

Config file changes

  • Added a config file for HeatIt Z-TRM3
  • Added a config file for Eurotronic Air quality sensor
  • The Application CC value IDs of the root endpoint are now preserved for the Qubino Flush 2 Relay

Features

  • Added the compat config option preserveRootApplicationCCValueIDs to disable hiding the root endpoint's application CC value IDs
  • The helper method guessFirmwareFileFormat was added to guess the firmware format based on the file contents
  • The value IDs of the Z-Wave+ CC are now internal and can instead be accessed through the corresponding properties on the ZWaveNode and Endpoint instances
  • The value IDs of the Node Naming and Location CC are now internal and can instead be accessed through the corresponding properties on the ZWaveNode instance
  • Added support for sending multicast and broadcast commands (non-secure only)

Bugfixes

  • Driver.destroy() no longer does anything after the first call
  • Sound Switch Tone Play Report commands now parse the volume if it exists
  • The log entries for Notification CC Reports now contain the correct notification event/state
  • The value IDs of Multi Channel Association CC are now marked as internal
  • When encapsulating commands, the secure flag is now correctly propagated
  • Fixed a bug where commands that belong to a different transaction could be mismatched, resulting in unexpected messages
  • The mapping of root to endpoint 1 now works correctly if the node does not support Multi Channel Association CC at all
  • When the Multilevel Switch CC level change commands indicate that Supervision is not supported, this is now remembered and the command gets retried without supervision.
  • Removed some debug logging which could blow up the log file size
  • Notification CC Reports are now parsed correctly when the V1 Alarm bytes are not zero
  • Color Switch CC: Setting the warm white targetValue no longer falsely claims that the propertyKey is missing
  • Added support for *.gbl firmware files and Aeotec updater executables which include a checksum and a target chip byte.
  • Removing a node association no longer throws an error when both multi channel and normal associations are supported.
  • getDefinedValueIDs no longer returns value IDs that are only controlled by a node

Changes under the hood

  • Types, interfaces and enum declarations in the docs can now be automatically copied and updated from the TypeScript sources
  • Fixed some leaky tests

5.5.0 (2020-11-24)

Config file changes

  • Added a config file for Jasco ZW3010
  • Added new Notification definitions
  • Added new Indicator definitions

Features

  • Implemented the replaceFailedNode API
  • Added a third argument to the "interview failed" event handler which includes an object with additional details about the interview attempt (see docs).
    WARNING: The current signature is deprecated and will be changed in the next major version!
  • Metadata can now be customized by CCs with the ccSpecific property. This is used in several CCs to allow applications to identify which value a value ID describes (e.g. sensor type, meter type, etc...)

Bugfixes

  • The logs of ConfigurationCC::PropertiesGet now include the correct next parameter #
  • The targetValue of switch-type CCs is no longer overwritten with undefined when a report without target value is received

Changes under the hood

  • Switched to npm@7 workspaces to get rid of TypeScript's paths config and support project-relative auto-imports

5.4.0 (2020-11-14)

Config file changes

  • Fibaro Keyfob no longer uses special chars in param labels
  • Changed the valueSize of param 9 for Shenzhen Neo PD03Z from 2 to 1

Features

  • Added the compat config option keepS0NonceUntilNext to disable automatic nonce invalidation for bugged devices (e.g. ID Lock) which reuse nonces in some situations

Bugfixes

  • If a node association is duplicated between Association CC and Multi Channel Association CC, it is now removed from both when using Controller.removeAssociations
  • Add missing production dependency semver to @zwave-js/config
  • The duration property for the Binary Switch, Color Switch, Multilevel Switch and Scene Activation CCs is now writeable
  • The Central Scene CC interview is now skipped if a device does not respond to the supported scenes request
  • Empty user codes are now also handled as strings instead of Buffer objects
  • The targetValue property for the Binary Switch, Multilevel Switch and Basic CCs is now created, even if is undefined.
  • The type CommandClass is now exported from zwave-js/CommandClass
  • The interview process for Configuration CC V3+ now continues even if the response to NameGet and/or InfoGet commands is missing or incomplete
  • The interview process for Association Group Info now continues even if a response is missing or incomplete
  • Multi Channel Lifeline Associations are no longer created automatically if the device does not support the Multi Channel CC
  • Fixed an issue where marking nodes with active transaction as asleep would mess up the serial communication with the controller
  • The receiver of an S0 nonce is now stored and after a successful reply, all nonces for said issuer are now invalidated
  • Unsuccessful controller commands now return the response message instead of throwing

Changes under the hood

  • The log messages for unsuccessful controller commands no longer claim that the controller did not respond

5.3.6 (2020-11-04)

Bugfixes

  • Compatibility with non-spec-compliant devices has been improved:
    • User Code CC: trim zero-padded user codes, handle non-ascii user codes as Buffers instead of strings
    • Notification CC: support deserializing Notification Reports where the Alarm Level is not 0
    • Notification CC: support deserializing Notification Reports with Keypad events that only contain a User ID instead of a UserCode::Report

5.3.5 (2020-11-03)

Bugfixes

  • Errors while updating the Multilevel Switch value in response to a Supervision report are now caught
  • Added missing metadata to the duration property in Color Switch CC

5.3.4 (2020-10-27)

Config changes

  • Updated config param description for Z-Wave.Me ZME_05459 Blinds controller
  • Added a device config for Z-Wave.Me ZME_06436 Flush Mountable Blind Control

Changes under the hood

  • Added more debug logging to track down a particularly sneaky bug

5.3.3 (2020-10-25)

Bugfixes

  • Including controller-type nodes (the bare minimum) is now supported
  • Alarm Sensor CC Reports no longer overwrite the node ID with 0.
  • The timespan that a node is assumed to be awake is now prolonged when it acknowledges a command
  • Fixed a crash while serializing a DoorLockCC::ConfigurationSet with invalid input

Changes under the hood

  • In case of an unexpected error while handling a message, the original error stack is now preserved if possible

5.3.2 (2020-10-21)

Bugfixes

  • Added / fixed some missing or incorrect exports from zwave-js:
    • The CCAPI type is now exported
    • NODE_ID_BROADCAST and NODE_ID_MAX are now value exports
    • The Endpoint class is now exported
    • The InterviewStage enum is now exported
  • Several user-facing errors were converted from Error to ZWaveError in order to be consistent with other errors.
  • Warnings about insecure communication with a node because of missing security configuration are now emitted as ZWaveErrors with code ZWaveErrorCodes.Controller_NodeInsecureCommunication
  • Internal references to @types/fs-extra and jest are no longer leaked, allowing users to consume this library without skipLibCheck
  • User Code CC no longer uses V2 methods during the interview of a V1 node
  • Fixed an error during the Central Scene CC interview that could occur if Association Group Information is not supported
  • For several CCs, missing responses to non-critical requests are now ignored during the interview
  • Sent nonces are now transmitted using the ACK and AutoRoute transmit options to fix secure inclusion issues with some devices
  • Fixed an error during logging of a DoorLockCC::ConfigurationSet command
  • After a fresh interview, battery-powered nodes that are temporarily mains-powered, are no longer sent into a "go to sleep" loop
  • When a node requests multiple nonces in a short timespan, only respond to the most recent request

Changes under the hood

  • SpyTransport was moved to @zwave-js/testing, a development-only testing package

5.3.1 (2020-10-13)

Bugfixes

  • The targetValue metadata in Color Switch CC no longer claims that the value is readonly

Changes under the hood

  • Changed how the transaction creation stack is included in error logs

5.3.0 (2020-10-10)

Features

  • Transactions now remember where they were created. This can be used to track down unhandled transaction rejections.
  • When a message should be sent to a node that is assumed to be dead, the node is now pinged first to check if it is really dead.
  • If a device supports Notification CC but sends Alarm CC (V1) frames, those are treated as Notification Reports if possible.

Bugfixes

  • The value IDs controlling Start/Stop Level Change commands in the Multilevel Switch CC are now also created for V1 and V2 nodes during the interview
  • The Alarm Sensor CC value IDs for supported sensor types are now created as soon as they are known to be supported.

5.2.2 (2020-10-05)

Config changes

  • Added Electronic Solutions DBMZ EU

Bugfixes

  • Fixed a crash when receiving truncated messages
  • When an unexpected error occurs while executing API commands (e.g. Security CC requires a nonce to be sent!), the corresponding transaction is now retried or rejected instead of crashing the driver.
  • Nodes are sent to sleep again when they have no pending messages
  • Compat queries are removed from the queue when a node goes to sleep
  • Pending pings are resolved when a node wakes up
  • sendNoMoreInformation now continues to work after it failed once
  • WakeUpCC::NoMoreInformation is no longer moved to the wakeup queue when a node falls asleep

Changes under the hood

  • Removed some unused code

5.2.1 (2020-10-03)

Bugfixes

  • Fixed a crash while trying to determine the notification mode of a node
  • Fixed a crash while defining metadata for a non-idle notification value

5.2.0 (2020-10-01)

Features

  • It is now possible to add an expiration timeout to sent messages by using the expire option for sendMessage.
  • Security CC now stores unsolicited nonces as "free" and tries to use free nonces instead of requesting a new one if possible.
  • Several improvements to Notification CC:
    • The interview now detects whether a node is push or pull
    • Push nodes now have their supporting values set to idle if no value is yet known
    • Pull nodes are now auto-refreshed every 6 hours and on wakeup

Bugfixes

  • During secure inclusion, the timeouts required by the Z-Wave specs are now correctly enforced
  • When starting a network heal, the "heal network progress" event is now emitted immediately with the initial progress.
  • Fixed a crash that could when queueing handshake messages while controller messages are pending
  • Thermostat Setpoint Set commands now use the device-preferred scale instead of defaulting to the first one.
  • A couple of Notification CC variables were changed to not have an idle state

Changes under the hood

  • Formatting log messages has been simplified. Log messages are now defined as objects and the log formatter auto-aligns the values.
  • All remaining CCs had their log representation improved. If an error occurs during this conversion, this error is now caught.
  • Code cleanup: TODOs, useless string interpolations
  • Updated a bunch of dependencies

5.1.0 (2020-09-28)

Features

  • Added support for User Code CC V2
  • All timeouts and the number of retry attempts are now configurable through the Driver options.

Bugfixes

  • Nodes are now only marked as dead or asleep if the controller receives no ACK for the sent messages. Missing responses to potentially unsupported requests no longer change the node status.
  • SendSupervisedCommandOptions now correctly extends CommandOptions
  • Timeouts configured through Driver options are now respected correctly

5.0.0 (2020-09-25)

Breaking changes

  • The status Alive was added to the NodeStatus enumeration. The node status can no longer switch between all states, only between Dead and Alive, between Asleep and Awake and from and to Unknown.
  • The status property on ZWaveNode is now readonly. To change the status, use the markAsAsleep and similar methods, which only change the status if it is legal to do so.
  • Unsolicited commands are now discarded in accordance with the Z-Wave specs if they are unencrypted but the CC is supported secure only
  • driver.start() now throws if no handler for the "error" is attached

Features

  • A new method withOptions was added to CCAPI, which controls the used SendCommandOptions. For example, this allows changing the priority of each API call for that instance.
  • All interview messages now automatically have a lower priority than most other messages, e.g. the ones created by user interaction. This should make the network feel much more responsive while an interview process is active.
  • The node events asleep, awake, alive and dead now include the previous status aswell.
  • Added the method isEncapsulatedWith to CommandClass to perform checks on the encapsulation stack.
  • In addition to serial ports, serial-over-tcp connections (e.g. by using ser2net) are now supported. You can connect to such a host using a connection string of the form tcp://hostname:port. Use these ser2net settings to host a serial port: <external-port>:raw:0:<path-to-serial>:115200 8DATABITS NONE 1STOPBIT

Bugfixes

  • Improved performance of reading from the Value DB
  • Retransmission of commands now distinguishes between errors on the controller side and missing responses from nodes
  • If a node that is known to be included securely does not respond to the Security CC interview, it is no longer assumed to be non-secure
  • If a node that is assumed to be included non-securely sends secure commands, it is now marked as secure and the interview will be restarted
  • The interview for sensor-type CCs is now skipped if a timeout occurs waiting for a response. Previously the whole interview was aborted.
  • Basic CC values that are mapped to Binary Switch or Binary Sensor are now interpreted correctly.
  • Fixed a crash that could occur when assembling a partial message while the driver is not ready yet.

Changes under the hood

  • The driver has been completely rewritten with state machines for a well-defined program flow and better testability. This should solve issues where communication may get stuck for unknown reasons.
  • A node's status and ready properties are now managed by state machines to have better control over how and when the status changes.
  • Enabled the TypeScript option strictFunctionTypes and the usage of several decorators is now statically enforced
  • Added more fine-grained control over expected responses, and distinguish between responses, callbacks and node updates for sent messages.
  • Many CCs had their log representation improved. If an error occurs during this conversion, this error is now caught and logged.

4.2.3 (2020-09-18)

Config changes

  • (slangstrom) Add support for Everspring AC301

4.2.2 (2020-09-15)

Config changes

  • Removed parameter #5 from Aeon Labs ZW130 because it doesn't seem to be supported in any firmware version

Bugfixes

  • A node is no longer marked as dead or asleep if it fails to respond to a Configuration CC::Get request. This can happen if the parameter is not supported.

4.2.1 (2020-09-10)

Config changes

  • (Mojito-Joe) Added a configuration file for ABUS CFA3010.

4.2.0 (2020-09-04)

Features

  • Invalid Multi Channel CC::Command Encapsulation which follow the V2+ format but use a V1 header are now treated like valid commands

Bugfixes

  • Further performance improvements while decoding Configuration CC::Reports

4.1.2 (2020-09-04)

Bugfixes

  • Reduced CPU usage in networks with a lot of values

4.1.1 (2020-09-01)

Bugfixes

  • The Basic CC interview is no longer performed if any actuator CC is supported
  • If a node does not respond to a Basic CC::Get, the interview is no longer aborted. Instead the Basic CC is marked as unsupported.

4.1.0 (2020-08-29)

Features

  • Added the ability to send Multilevel Sensor Reports using the new sendReport method

Misc

  • Updated dependencies including bugfixes and security patches

4.0.7 (2020-08-16)

Bugfixes

  • Replaced Sentry.io DSN
  • Each installation now generates a random ID that is can be used to suppress error reports on a per-user basis

4.0.6 (2020-07-30)

Bugfixes

  • Logs are no longer split across two logfiles.

4.0.5 (2020-07-30)

Bugfixes

  • Made Meter CC::Reset accessible through the SET_VALUE API.

4.0.4 (2020-07-05)

Bugfixes

  • During the interview, endpoint associations are now converted to node associations if required
  • Allow Set and SupportedSet commands in Alarm CC V2

4.0.3 (2020-06-30)

Bugfixes

  • If a node fails to respond to Multi Channel Endpoint Find, the interview is no longer aborted and sequential endpoints are assumed instead
  • Renamed the manufacturer Goap to Qubino
  • For many Qubino devices, the lifeline now uses a node association

4.0.2 (2020-06-29)

Bugfixes

  • The driver no longer goes into an infinite loop when receiving a CRC-16 Command Encapsulation CC (#888)

4.0.1 (2020-06-26)

Breaking changes

See "Changes under the hood". I don't expect anything to break, but to be safe, I'll declare this as a major version.

Bugfixes

  • It is now assumed that the Basic CC API is always supported

Features

  • Mandatory supported CCs that are defined in the device class config are now respected. This should improve support for legacy devices that don't include all CCs in the NIF.
  • Added support for Sound Switch CC
  • Added support for Alarm Sensor CC. This CC will only be interviewed if Notification CC is not supported.
  • Added a sendReport command to the Notification CC API, which can be used to send custom NotificationCCReports.

Changes under the hood

  • Moved the definition of legacy Z-Wave device classes to a config file.

  • This project has been converted to a monorepo and split into the following packages:

    • zwave-js: As before, this is the main entry point for consumers
    • @zwave-js/config: The configuration files and methods to access them
    • @zwave-js/core: The core modules, which are shared between zwave-js and @zwave-js/config
    • @zwave-js/serial: A lightweight wrapper around node-serialport with a built-in parser for received serial API messages
    • @zwave-js/shared: Utility methods that are shared between all other packages

    It is likely that other packages will be added in the future.

3.8.5 (2020-06-18)

Bugfixes

  • Overlapping SendData(Multicast) commands are now avoided
  • SendData(Multicast) commands without a callback are now aborted after a while

3.8.3 (2020-06-17)

Bugfixes

  • The CRC-16 Command Encapsulation CC is now correctly detected as an encapsulating CC

3.8.2 (2020-06-17)

Bugfixes

  • Missing information is included in logfiles again when the LOGTOFILE env variable is set after the library was imported
  • The CRC-16 Command Encapsulation CC is now correctly detected as implemented
  • If an association group is configured to use node associations, the Multi Channel Association CC version heuristic is now ignored

Changes under the hood

  • Added some details to the Multi Channel Association CC interview logging

3.8.1 (2020-06-16)

Bugfixes

  • Associations to the controller are not checked for supported CCs anymore
  • addAssociations now respects the noEndpoint flag
  • Removing multi channel endpoint association to the root endpoint no longer removes the equivalent node association
  • getAllDestinationsCached no longer treats node id associations like multi channel associations to endpoint 0

3.8.0 (2020-06-16)

Features

  • Added the noEndpoint flag to force lifeline associations to use node id associations
  • The Multi Channel Association CC interview now falls back to setting associations with Association CC if the node does not accept the added associations

Config changes

  • Changed AEON Labs ZW095 lifeline to a node id association
  • (nicoh88) Added config files for Devolo Dimmer (MT2760) and Shutter (MT2761)

3.7.9 (2020-06-16)

Bugfixes

  • Logfiles are created again when the LOGTOFILE env variable is set after the library was imported

3.7.8 (2020-06-16)

Bugfixes

  • If a configured lifeline association is outside the range of multi channel associations, a normal association is now used instead
  • The Association CC interview now always requests the group count, even if Multi Channel Association CC is supported
  • getAssociations and getAssociationGroups now respect all associations (the ones done with Multi Channel Association CC and the ones done with Association CC).

3.7.7 (2020-06-15)

Bugfixes

  • Logfiles now contain all logs in the correct order
  • Fixed an error when using the DoorLockCC setValue API when not all configuration values have been received
  • Errors in the async part of handleFirmwareUpdateGet are now caught and logged
  • When a non Z-Wave serialport is configured or loading the configuration files, the "error" event is now emitted and the driver is destroyed instead of crashing
  • If a MultiChannelCCEndpointFindReport does not contain any bytes for the found endpoints, the CC is no longer discarded. This should improve compatibility with some devices, e.g. TKB Home TZ74 Dual Switch.

Changes under the hood

  • Removed some unnecessary logging

3.7.6 (2020-06-15)

Bugfixes

  • Fixed a crash that happens when receiving a Multi Command CC

3.7.5 (2020-06-14)

Bugfixes

  • Removing a multi channel endpoint association to the root endpoint now also removes the equivalent node association (REVERTED in v3.8.1)

3.7.4 (2020-06-14)

Bugfixes

  • Improved logging for Multi Channel Association CC
  • Assembling partial CCs now works if there are multiple levels (e.g. Security CC -> Multi Channel Association Report)

3.7.3 (2020-06-14)

Bugfixes

  • Logging for the following CCs has been improved:
    • MultiChannelCCCommandEncapsulation - The source endpoint was added
    • SupervisionCCGet and SupervisionCCReport - Added parameter logging
    • MultilevelSwitchCCSet, MultilevelSwitchCCReport and MultilevelSwitchCCStartLevelChange - Added parameter logging
  • ZWaveError is now exported as a value
  • The Firmware type is now exported
  • Node information frames after node.refreshInfo are no longer discarded
  • Firmware updates we don't know about are now aborted without emitting an event
  • Failed firmware updates are now handled correctly
  • All associations of the Fibaro FGMS-001 motion sensor are now configured to point to the controller

3.7.2 (2020-06-12)

Bugfixes

  • During the interview, the cached lifeline destinations for Multi Channel Association and Association CCs are now updated.

3.7.1 (2020-06-12)

Bugfixes

  • node.refreshInfo no longer causes an event to be emitted for every cleared value
  • node.refreshInfo resets the state of the ready event and all cached CCs and API instances

3.7.0 (2020-06-11)

Bugfixes

  • The compat queries for Danfoss thermostats now query setpoint 1
  • Always send pings, even if the target node is asleep
  • Several report-type commands now correctly store their values in the value DB when received
  • MultiChannelCCV1Get now checks whether the returned MultiChannelCCV1Report is for the correct endpoint
  • A node's neighbors are now persisted in the cache so they can be used to visualize the network until a repeat interview is complete
  • Added labels to metadata of Language CC values

Features

  • Added support for Door Lock CC V4
  • Added support for Lock CC
  • Added interview for Language CC
  • Added support for over-the-air (OTA) firmware updates with Firmware Update Meta Data CC
  • Lifeline reports for the root endpoint are now mapped to Endpoint 1 if the node supports Multi Channel Association CC in V1 or V2
  • ZWaveNodes now have a refreshInfo method which resets all known information and restarts the node interview
  • The node interview is no longer aborted if a response for the following requests times out:
    • Battery status
    • Battery health
    • Binary Sensor status
    • Multilevel Sensor status

Changes under the hood

  • Added driver.waitForCommand method to expect receipt of a command that matches a given predicate
  • Added driver.computeNetCCPayloadSize method to compute how many payload bytes can be transmitted with a given CC (taking encapsulation into account).
  • During build, CCs constructors for report-type commands are now checked if they call persistValues. Application CCs that don't will cause an error, all others a warning.

3.6.4 (2020-06-04)

Bugfixes

  • Thermostat Setpoint Set has been removed from the compat queries for Danfoss thermostats, because it overwrites queued commands

3.6.3 (2020-06-03)

Bugfixes

  • Always send handshakes replies, even if the target node is asleep

3.6.2 (2020-06-03)

Bugfixes

  • "Not implemented" or "Invalid payload" errors that happen while merging partial CCs are now correctly handled

3.6.1 (2020-06-03)

Bugfixes

  • GetNodeProtocolInfoRequest is no longer treated as a message to a node
  • When moving messages to the wakeup queue, all pings are now rejected instead of only the pending ones. This avoids interviews getting stuck on a ping.

3.6.0 (2020-06-02)

Features

  • Added support for Protection CC
  • The driver now sends a nonce in reply to SecurityCCCommandEncapsulationNonceGet commands

Bugfixes

  • Nodes that ask for a nonce are now automatically marked secure
  • Fixed the computation of the authentication code when secure auth data length was a multiple of 16 bytes.
  • Nonces are now marked as used immediately after (de)serialization
  • If a message fails to serialize, the corresponding transaction is now rejected instead of crashing the driver
  • Sequenced S0 encapsulated commands can now be received
  • Unsolicited commands are now correctly decoded if they are split across multiple messages

3.5.5 (2020-06-01)

Bugfixes

  • The Security CC interview no longer stalls the interview process if the node is not included securely.
  • Nonces that could not be sent are now expired immediately
  • The security status of nodes is now stored and updated correctly

3.5.4 (2020-05-30)

Bugfixes

  • The driver now correctly handles nested transactions and their retransmission (e.g. for security encapsulated messages)

Changes under the hood

  • Updated TypeScript to v3.9
  • Updated ESLint to v7, some changes to lint rules

3.5.3 (2020-05-27)

Bugfixes

  • All emitted "error" events now correctly contain an Error instance as the parameter.
  • When a node sends a NIF, pending pings are resolved. This should increase the consistency of manually waking up nodes during the interview.
  • When an interview is cut short due to missing network key, the "error" event is only emitted once.
  • When a node is removed, its interview process is canceled and all errors are suppressed.
  • If Multi Channel Association CC is V1, removing all destinations from all groups now correctly loops through all groups instead of using 0 as the group id.

3.5.2 (2020-05-27)

Bugfixes

Various fixes related to Security CC when the network key is not configured. This means that the driver will not crash but likely there's no meaningful communication with secure nodes possible:

  • The list of securely supported commands is not requested
  • Nonce Get requests are not answered
  • CCs are no longer encapsulated securely. This means that the interview for battery-powered nodes won't complete if Wake Up CC is only supported securely.

3.5.1 (2020-05-25)

Bugfixes

  • Cache values that are Maps are now correctly serialized. Fixes crash issuedCommands.has is not a function
  • Fixed crashes with the message Security CC can only be used when the network key for the driver is set.

3.5.0 (2020-05-24)

Features

  • Added experimental support for Security S0 (#814)
  • The "inclusion started" event now includes a boolean parameter to indicate whether the inclusion was started securely

Bugfixes

  • It is now possible to stop inclusion and exclusion processes again

3.4.0 (2020-05-21)

Features

  • ZWaveNode class: expose ready as a property (instead of only a one-time event), which can be missed

Bugfixes

  • The NodeStatus enum is now exposed as a value (instead of a type-only export)

3.3.0 (2020-05-21)

Features

  • The endpoint interview for Version CC is now skipped
  • The node status is now determined more quickly during the interview

Bugfixes

  • If the current transaction is a ping, the calling code no longer gets stuck when messages are moved to the wakeup queue
  • Config parameter 5 has been removed from the WallMote Quad for firmware versions <= 1.5
  • Unsolicited messages are now logged
  • Messages to nodes which don't expect an acknowledgement are now correctly retransmitted if the response doesn't come (e.g. RequestNodeInfo)
  • Pings are no longer dropped if the controller failed to send them (in contrast to a missing response from the node)
  • The log for unrecoverable errors during the interview now include the node ID
  • The interview process should now correctly be rescheduled when communication fails outside the CC interview stage

3.2.4 (2020-05-17)

  • Multi Channel Association CC: Fall back to config files during the interview if the node does not support Z-Wave+ (like Association CC does)

3.2.3 (2020-05-17)

Bugfixes

  • Multi Channel Association CC: After the controller is assigned to the lifeline in the interview, this association is added to the cached association list
  • Controller:
    • getAssociationGroups now includes the last group aswell
    • adding and removing associations now updates the list of known associations

3.2.2 (2020-05-17)

Bugfixes

  • Fixed a crash that happened when received CCs tried to access the Value DB before it was opened

3.2.1 (2020-05-17)

Bugfixes

  • Multi Channel node associations to the controller are converted to endpoint associations if necessary
  • VersionCCCommandClassGet now verifies that the response matches the requested CC
  • Removed a duplicate line when logging the protocol information of a node

3.2.0 (2020-05-15)

Features

  • Added compatibility option queryOnWakeup to configure which API methods must be called when a device wakes up. Some devices (like the Danfoss thermostats) expect to be queried after wakeup, even if they send the required information themselves.

Bugfixes

  • CCs that can split their information into multiple messages now correctly store that information when only a single message is received

3.1.0 (2020-05-11)

Features

  • Added getAssociationGroups method to Controller to retrieve all defined association groups and their information for a node (#794)

Bugfixes

  • Node information (especially CC versions) are correctly restored from cache again
  • The metadata for the manufacturer info for the Controller is now correctly stored as metadata, not values
  • All handles for the optimized network cache are now closed when destroying the driver
  • Nodes are now sent to sleep 1 second after waking up if there are no pending messages

3.0.0 (2020-05-08)

Breaking changes

  • The healNetwork method was removed from the Controller class (deprecated in v2.4.0) (#731).
    If you're still using it, you need to switch to beginHealingNetwork.
  • The minimum supported Node.js version is now 10

Features

  • Reduced CPU usage of the network cache (#784)
  • During the network heal, the routes from all nodes to the controller and between associated nodes are now updated.

Bugfixes

  • Duration objects are now correctly deserialized from the cache
  • During the interview, value events for value IDs of the root endpoint are now correctly suppressed if they mirror functionality of other endpoints.

2.16.0 (2020-04-28)

Features

  • Added support for Color Switch CC
  • Added exports for all the relevant things needed by consuming applications (https://github.com/AlCalzone/node-zwave-js/pull/762#issuecomment-613614445)
  • Log outputs can now be filtered by nodes using the LOG_NODES env variable (#772)
  • Nodes now emit a "interview failed" event when the interview fails with some additional info why (#769)

Bugfixes

  • Fixed error text in getAssociations
  • WakeUp CC is now marked as supported when receiving wake up notification
  • The byte length of Configuration values is now validated under more circumstances

Changes under the hood

  • TypeScript 3.8 with all its goodies!
  • Filter out a bunch of user errors before reporting them with Sentry
  • Use gulp for better control over some build tasks
  • Check out the new Documentation!

2.15.7 (2020-03-22)

Bugfixes

  • Added missing setValue API for Fibaro Venetian Blind CC

2.15.6 (2020-03-16)

Bugfixes

  • Fibaro Venetian Blind CC Reports are now correctly deserialized

2.15.5 (2020-03-15)

Bugfixes

  • Delayed the check for manufacturer ID until the Manufacturer Proprietary CC needs it to avoid crashing during cache serialization

2.15.4 (2020-03-11)

Bugfixes

  • The FibaroVenetianBlindCCGet now correctly expects a response

2.15.3 (2020-03-09)

Bugfixes

  • The firmwareVersion property of a node now returns a value again
  • Fixed the interview procedure of Manufacturer Proprietary CC by reading the manufacturer ID from the Value DB inside the constructor

2.15.2 (2020-03-07)

Bugfixes

  • Fixed the logic for filtering out root endpoint values

2.15.1 (2020-03-07)

Bugfixes

  • Send data transmit reports for singlecast messages are detected correctly again

2.15.0 (2020-03-07)

Features

  • Config files may now specify manufacturer proprietary parameters. This can be used to enable certain manufacturer proprietary commands
  • Completed support for the Fibaro Venetian Blind CC
  • Added support for some legacy devices by implementing Multi Instance CC (version 1 of the Multi Channel CC)
  • When the wake up interval of a device seems to be longer than configured, the current interval is now re-queried
  • Upon receipt of a ClockCCReport which deviates from the controller's clock, the sending node's clock setting now gets updated
  • Value IDs of the root endpoint which have a corresponding value on another endpoint are now filtered out

Bugfixes

  • Fixed a compilation issue regarding Send Data message arguments
  • When testing potential responses of Multi Channel requests, the response's source endpoint is now checked
  • When testing potential responses of ConfigurationGet requests, the response's parameter number is now checked
  • The device config for the controller node now gets loaded if possible

Configuration updates

  • Updated ZHC5002 configuration for firmware versions >= 2.02
  • Removed a bunch of duplicate and incomplete configuration files

2.14.0 (2020-02-23)

Features

  • Added support for multicast destinations in CCs
  • Multichannel CC: The interview now needs less messages when a node reports identical endpoint capabilities

Bugfixes

  • The setValue API no longer crashes the driver if an invalid value for the CC is passed
  • Configuration CC: The Set command no longer accepts values that are too large for the param's value size.

2.13.3 (2020-02-13)

Bugfixes

  • Multi Channel CC: The EndPointFind is no longer used in V2

2.13.2 (2020-02-10)

Bugfixes

  • The config file for HeatIt Z-Push Button 8 is now correctly retrieved
  • Multilevel Switch CC: Start level change commands now include the start level even if the ignoreStartLevel flag is set. Some devices might ignore this flag and behave oddly.

2.13.1 (2020-02-09)

Bugfixes

  • The lower limit for the Multi Channel CC has been set to V2

2.13.0 (2020-02-06)

Features

  • Improved support for notifications with the following event parameters: Duration, Command Classes, named numeric values
  • Added support for the Clock CC.
  • Multilevel Switch CC: Start/StopLevelChange commands are now supervised if possible

Bugfixes

  • Get-type commands which request a specific type now inspect received Reports whether they match the request

2.12.3 (2020-02-02)

Bugfixes

  • The interview sequence for Thermostat CC V1/V2 should no longer get stuck
  • Nodes that confirm the receipt of a request but do not respond are no longer marked as sleeping or dead
  • Messages from wrong nodes are no longer considered as a potential response to the current transaction
  • The RTT calculation now works correctly for retransmitted messages
  • Fixed a crash that could happen when receiving a MultiChannelCCAggregatedMembersReport
  • Fixed a crash that could happen during the Notification CC interview

2.12.2 (2020-01-26)

Bugfixes

  • Thermostat Setpoint CC: In Version 1 and 2, the setpoint type N/A is no longer scanned.

2.12.1 (2020-01-25)

Bugfixes

  • The node interview is no longer aborted when an unexpected ConfigurationReport is received
  • Retrying the interview procedure now happens after a short waiting period to give nodes time to recover
  • If a node times out after a confirmation, the sent message is retried just like if there was no response at all
  • Messages to sleeping nodes are now also retried before immediately assuming they are asleep

2.12.0 (2020-01-25)

Features

  • When a node is removed from the network, all associations to it are also removed
  • The interview procedure is now canceled and retried when an error occurs instead of silently failing all futher steps
  • The progress report for network healing distinguishes between failed, skipped, pending and healed nodes.

Bugfixes

  • The network heal now skips nodes that are dead or likely dead

Changes under the hood

  • Added some lint rules for the firmware in device config files

2.11.1 (2020-01-21)

Bugfixes

  • A potential source of stalled communication because of a missing timeout was eliminated
  • The progress report for network healing now correctly distinguishes between not yet healed nodes and nodes that failed to heal

Changes under the hood

  • Improved the log output for bullet points as well as sent and received messages
  • Log lines that are completely filled and have secondary tags no longer include garbage when logging to a file

2.11.0 (2020-01-21)

Features

  • Implemented the Supervision CC. The Driver now has two additional methods to make use of that feature:
    • sendSupervisedCommand(): Sends a command to a node using supervision and returns with the reported status (success, working, fail). This method throws if Supervision CC is not supported.
    • trySendCommandSupervised(): Convenience wrapper around sendSupervisedCommand and sendCommand. Automatically determines whether supervision is supported. Returns the supervision status if it is, and nothing otherwise
  • The Multilevel Switch CC now makes use of supervised set commands if possible.

Bugfixes

  • Messages to sleeping nodes are now correctly de-prioritized when the awake timeout elapses
  • Messages are now automatically re-transmitted when the controller responds with a NAK or when it fails to respond at all
  • ACKs from the controller after a retransmit are no longer treated as unexpected
  • The logic that determines a message's role (expected, unexpected, confirmation, ...) now takes the encapsulation stack into account.

2.10.0 (2020-01-18)

Features

  • Locally reset devices are now treated like failing nodes and automatically removed from the controller
  • The Notification status is now also queried on wakeup
  • The status of non-reporting listening nodes is now regularly queried

Bugfixes

  • The controller is now correctly treated as an awake node when prioritizing messages
  • The partial interview for the Meter CC no longer re-queries the capabilities
  • All timeouts and intervals are now cleared when the driver is shut down.

2.9.1 (2020-01-07)

Bugfixes

  • Notification CC Reports that are received as a response during the interview are now correctly handled
  • The ready event is now only for nodes that are known to be alive or asleep
  • After removeFailedNode() has succeeded, the node is removed from the driver and the corresponding events are emitted
  • The alive, awake and dead events are now also emitted for nodes if their status was previously unknown.
  • After a node was removed or marked as dead, the check for all nodes ready is performed again
  • Dead nodes are ignored in the check for all nodes ready to avoid the necessity for physical user interaction

2.9.0 (2020-01-05)

Features

  • Added isFailedNode() and removeFailedNode() to the Controller class
  • The scenes of the Scene Activation CC are now automatically reset after the duration has elapsed.

2.8.0 (2020-01-04)

Features

  • Added the driver options fs and cacheDir to replace the default fs driver and/or cache directory

2.7.1 (2020-01-04)

Bugfixes

  • The Indicator CC setValue API now accepts boolean values for binary indicators

2.7.0 (2020-01-03)

Features

  • Basic CC reports no longer create a value when they are mapped to another CC
  • IndicatorCC:
    • Binary indicators now use boolean values
    • V1 indicators (unspecified) are now ignored if an endpoint is known to have V2 indicators

Bugfixes

  • Many occurences of TODO: no handler for application command in the log were removed
  • The driver is no longer reset when unexpected data is received. Instead the invalid bytes are skipped.

2.6.0 (2020-01-02)

Features

  • Implemented Scene Activation CC

Bugfixes

  • The env variables LOGTOFILE and LOGLEVEL are now lazily evaluated

2.5.2 (2020-01-01)

Bugfixes

  • Removed a duplicate config parameter from Heatit Z-Scene Controller
  • IndicatorCC: The first indicator ID is no longer ignored

2.5.1 (2019-12-30)

Bugfixes

  • The device config is now also loaded when deserializing nodes from the cache

2.5.0 (2019-12-30)

Features

  • Added the event "ready" to ZWaveNode and "all nodes ready" to Driver to notify users that a node respectively all nodes are safe to be used

Bugfixes (or maybe it's a feature?)

  • BasicCCSet commands that are received from a node are now treated like reports
  • If possible, received BasicCC commands are mapped to specific CCs

Definitely Bugfixes

  • Avoid resetting the IO layer while the driver is not ready
  • IndicatorCC:
    • Corrected the expected response to SupportedGet command
    • Improved property(Key) translation
  • MeterCC: Add translation for property and propertyKey
  • Nodes and timers are now cleaned up after a hard reset of the controller
  • Supported CC and their versions are now correctly stored in the cache file
  • The cache file is no longer discarded when it contains a value of an unsupported CC
  • Endpoints can no longer be accessed before the Multi Channel interview is completed.
  • Duplicate labels for several configuration parameters were renamed

Changes under the hood

  • Updated several dependencies
  • Duplicate configuration parameter labels are now marked as a warning

2.4.1 (2019-12-18)

Bugfixes

  • Fixed a crash that happens when a MultiChannelCCAggregatedMembersReport is received.
  • Fixed a crash that happens when receiving a message from a node endpoint, but that endpoint was not known to the controller

2.4.0 (2019-12-17)

Features

  • The log output now contains the version of this library (and a fancy title!)
  • Reworked the healNetwork process:
    • The controller now has two additional methods: beginHealingNetwork and stopHealingNetwork. The original healNetwork now simply calls beginHealingNetwork and is deprecated.
    • Two additional events (heal network progress and heal network done) are emitted during the process. The event callback receives a map with the current process: node id (number) => heal done (boolean).
  • Pending messages are now automatically removed from the send queue if they no longer serve a purpose (e.g. node removed or healing process stopped)
  • The status of sleeping nodes is automatically reset to asleep 10 seconds after the wake up or the last completed transaction.

Bugfixes

  • Config parameters are no longer queried multiple times if there are partial config params defined
  • If a ping failed and the node's messages are moved to the wake up queue, the send queue is no longer stalled by the unanswered ping
  • When sending a message to a node that is known to be asleep, the message's priority is automatically set to Wake Up (except for NoOperationCCs).

2.3.0 (2019-12-14)

Features

  • Using the env variable LOGTOFILE=true, the log output can now be redirected to a file instead of stdout.

Bugfixes

  • Updated alcalzone-shared lib to a working version
  • The parameter number during interview of Configuration CC is now logged correctly instead of [object Object].

Changes under the hood

  • Updated several dependencies

2.2.1 (2019-12-13)

Bugfixes

  • Removed deadlocks that happened when stopping the inclusion or exclusion process
  • The start and stop of an in- or exclusion process is now correctly announced using the inclusion started, inclusion stopped, exclusion started and exclusion stopped events.

2.2.0 (2019-12-11)

Bugfixes

  • Accessing a node's or endpoint's commandClasses property with Symbols no longer causes a crash
  • Revised querying logic for devices without Z-Wave+ or Lifeline associations

Features

  • Added support for Indicator CC

2.1.1 (2019-12-07)

Bugfixes

  • The serial port will now only be closed if it is already open. This causes less errors to be thrown when opening the port fails.

2.1.0 (2019-12-01)

Features

  • Added support for Meter CC

Bugfixes

  • Fixed a crash that happened when setting a configuration value that would not fit in the configured value size by marking many configuration parameters in device config files as unsigned.

Changes under the hood

  • The min/max value for configuration parameters in device config files is now validated

2.0.1 (2019-11-27)

Bugfixes

  • Fixed a crash that happened when saving the network cache with a CC that is neither supported nor controlled

Changes under the hood

  • Errors in stack traces are now mapped to the original TypeScript sources.

2.0.0 (2019-11-26)

Changes for users

  • The value updated event is no longer emitted for interviewComplete every time a command is received
  • Basic CC is no longer reported as supported when other actuator CCs are supported
  • If a node only controls a CC, the corresponding CCAPI is no longer falsely offered
  • The driver no longer overrides the CC version that was determined by the CC constructor
  • Binary Sensor CC is now correctly interviewed
  • Added a large amount of device configuration files. This powers the Configuration CC for versions <3 and enables lifeline associations for devices that don't support the Z-Wave+ standard.
  • Renamed a few manufacturers
  • When devices wake up that neither support Z-Wave+ nor have a lifeline association, all sensor and actuator CCs are queried for updated values

Bugfixes

  • Multi Channel CC no longer queries endpoint #0 if EndpointFind returns no results or only zeroes.
  • When values and metadata are deserialized from the cache, no more events are emitted. If you relied on this behavior, use getDefinedValueIDs() instead after the interview was completed.

Breaking changes

  • Added a new member to ValueID: property (number | string) replaces propertyName as the property identifier. propertyName is now in line with commandClassName and propertyKeyName and contains a speaking representation of the property

Changes under the hood

  • Deduplicated some code in the config lint script
  • Upgrade to TypeScript 3.7
  • The ccCommand properties' types are now specified using declare class fields instead of interface merging

1.7.0 (2019-11-03)

  • Support interviewing multi channel endpoints
  • Improve performance by not formatting logs that won't be visible
  • Multi Channel CC: Mark commandClasses property as internal
  • Upgrade to TypeScript 3.7 RC
  • Remove secondary switch functionality from Multilevel Switch CC
  • Implement interview procedure for Multilevel Switch CC
  • Upgrade Prettier and ESLint to make use of the new TS 3.7 syntax
  • Update Multilevel Sensor definitions to latest specs and rename some sensor types
  • Move sensor type and scale definitions to JSON config files
  • Extract named scales to their own configuration file
  • Also use scale configuration for Thermostat Setpoint CC
  • Improve error output for lint:config script
  • Upgrade serialport to version 8
  • Create CC instances for all endpoints in getDefinedValueIDs

1.6.0 (2019-10-23)

  • Implement Multi Channel Association CC and prefer it to Association CC if possible
  • Implement AssociationGroupInfoCC
  • Add support for CRC-16 CC
  • Bump Association CC to V3, which adds no new commands
  • Add setValue API to TimeParametersCC and use JS date objects
  • Add set value API to NodeNamingAndLocationCC
  • Add interview for Multilevel Sensor CC, fix scale parsing
  • Add interview for Thermostat Setback CC
  • Add interview for Central Scene CC
  • Filter out internal key value pairs in getDefinedValueIDs
  • Add tests (and the necessary snippets) for CC serialization and deserialization routines and fix the found errors:
    • Central Scene: fix calculation of scene bitmask size
    • Association Group Information: fix offset during parsing of InfoReport
    • (Multi Channel) Association: fix broken check for negative group IDs
    • Handle encapsulation (de)serialization correctly
  • Help GitHub understand that this is not a C(++)-repo
  • Add interview implemention to tracking issue
  • Moved supportsCommand from CommandClass to CCAPI
  • CC API methods now check that the underlying command is supported by the node
  • Improved handling of bit masks
  • Implement interview for ConfigurationCC, include spec changes
  • Don't interview CCs the VersionCC reports as unsupported
  • Cleanup loglevels for some log outputs
  • Update dependencies

1.5.0 (2019-10-06)

  • Add the remaining notification configurations:
    • Gas Alarm (0x12)
    • Pest Control (0x13)
    • Light Sensor (0x14)
    • Water Quality Monitoring (0x15)
    • Home monitoring (0x16)
  • Check all received request messages for a matching callback id
  • Add interview procedure for ThermostatSetpointCC
  • Add setValue API for ThermostatSetpointCC
  • Hide more CC values of newer CC versions
  • Fix translation of enum values to state metadata so it is able to handle strings starting with a number
  • Interview new nodes immediately after inclusion
  • Automatically determine the correct CC interview sequence
  • getDefinedValueIDs now returns statically defined, dynamically registered and created value IDs

1.4.0 (2019-10-03)

  • Partially re-interview CCs after restart from cache
  • Add interview procedure for BasicCC
  • Add the option to specify a minimum version for ccValues
  • Implement BatteryCC V2 (including API)
  • ThermostatOperatingStateCC: bump CC version
  • Add setValue API to WakeUp CC
  • Add more notification configurations:
    • Appliance (0x0C)
    • Home Health (0x0D)
    • Siren (0x0E)
    • Water Valve (0x0F)
    • Weather Alarm (0x10)
    • Irrigation (0x11)
  • Prepare for TS 3.7
  • Add missing callbackId to HardResetRequest
  • Create callback ids centrally on the driver instance
  • Implement TimeCC v2 and TimeParametersCC v1
  • TimeParametersCC: use local time if the node has no means to determine timezone
  • Add support for excluding nodes from the network
  • Update dependencies

1.3.1 (2019-09-25)

  • Mark options in IDriver as internal

1.3.0 (2019-09-04)

  • Add more notification configurations:
    • Power Management (0x08)
    • System (0x09)
    • Emergency Alarm (0x0A)
    • Clock (0x0B)
  • Implement node and network heal
  • Add method to enumerate serial ports
  • Mark readonly CCs

1.2.1 (2019-08-29)

  • Implement AssociationCC (V2)
  • fix CC interview not being done completely
  • Implement ThermostatModeCC (V3)
  • Implement ThermostatOperatingStateCC (V1)
  • Make a bunch of CC values internal
  • allow preventing notification variables from going idle
  • Add more notification configurations:
    • Access Control (0x06)
    • Water Alarm (0x05)
    • Heat Alarm (0x04)
    • CO2 Alarm (0x03)
    • CO Alarm (0x02)
  • add a lint step for config files
  • handle errors in config files more gracefully
  • dependency updates

1.1.1 (2019-08-25)

  • Drop messages with non-implemented CCs instead of crashing
  • Fix parsing of MultiChannelCC encapsulated CCs
  • Fix unwrapping of MultiChannelCCs inside ApplicationCommandRequests
  • Include config dir and TypeScript definitions in package
  • Move ansi-colors from dev to production dependencies

1.1.0 (2019-08-25)

  • Improve support for notification CC: named variables and events

1.0.1 (2019-08-20)

  • Fix log message for metadata updates
  • Remove unused dependencies, exports and methods
  • Fix broken setValue API test

1.0.0 (2019-08-19)

  • First working release