button-board-6x6mm-3buttons

External button board for buttons for Arduino or Raspberry Pi.

• Dimensions: 52 x 12 mm
• Mounting holes: M3 holes (3.2 mm), distance 36 mm
• Buttons: 6x6 mm tactile push buttons

This board can be used for Button pins, which are pulled high or pulled low. If the button pin is pulled low, solder a bridge to VCC for that button.

Instructions

• Solder a bridge on the back side of the board for every button. For a pin which is pulled low by default, solder the bridge to GND.

More PCBs

• Button Board with 4 Buttons