Skip to content

The Double Ratchet Algorithm implementation in Go

License

Notifications You must be signed in to change notification settings

tiabc/doubleratchet

Repository files navigation

doubleratchet

Go Report Card Build Status Coverage Status GoDoc

The Double Ratchet Algorithm is used by two parties to exchange encrypted messages based on a shared secret key. Typically the parties will use some key agreement protocol (such as X3DH) to agree on the shared secret key. Following this, the parties will use the Double Ratchet to send and receive encrypted messages.

The parties derive new keys for every Double Ratchet message so that earlier keys cannot be calculated from later ones. The parties also send Diffie-Hellman public values attached to their messages. The results of Diffie-Hellman calculations are mixed into the derived keys so that later keys cannot be calculated from earlier ones. These properties gives some protection to earlier or later encrypted messages in case of a compromise of a party's keys.

Project status

The library is in beta version and ready for integration into production projects with care. Let me know if you face any problems or have any questions or suggestions.

Implementation notes

The Double Ratchet logic

  1. No more than 1000 messages can be skipped in a single chain.
  2. Skipped messages from a single ratchet step are deleted after 100 ratchet steps.
  3. Both parties' sending and receiving chains are initialized with the shared key so that both of them could message each other from the very beginning.
  4. Both plain and encrypted header versions are implemented.

Cryptographic primitives

  1. GENERATE_DH(): Curve25519
  2. KDF_RK(rk, dh_out): HKDF with SHA-256
  3. KDF_CK(ck): HMAC with SHA-256 and constant inputs
  4. ENCRYPT(mk, pt, associated_data): AES-256-CTR with HMAC-SHA-256 and IV derived alongside an encryption key

Installation

go get github.com/tiabc/doubleratchet

then cd into the project directory and install dependencies:

glide up

If glide is not installed, install it.

Usage

Basic usage example

package main

import (
	"fmt"
	"log"

	"github.com/tiabc/doubleratchet"
)

func main() {
	// The shared key both parties have already agreed upon before the communication.
	sk := [32]byte{
		0xeb, 0x8, 0x10, 0x7c, 0x33, 0x54, 0x0, 0x20,
		0xe9, 0x4f, 0x6c, 0x84, 0xe4, 0x39, 0x50, 0x5a,
		0x2f, 0x60, 0xbe, 0x81, 0xa, 0x78, 0x8b, 0xeb,
		0x1e, 0x2c, 0x9, 0x8d, 0x4b, 0x4d, 0xc1, 0x40,
	}

	// Diffie-Hellman key pair generated by one of the parties during key exchange or
	// by any other means. The public key MUST be sent to another party for initialization
	// before the communication begins.
	keyPair, err := doubleratchet.DefaultCrypto{}.GenerateDH()
	if err != nil {
		log.Fatal(err)
	}

	// Bob MUST be created with the shared secret and a DH key pair.
	bob, err := doubleratchet.New(sk, keyPair)
	if err != nil {
		log.Fatal(err)
	}

	// Alice MUST be created with the shared secret and Bob's public key.
	alice, err := doubleratchet.NewWithRemoteKey(sk, keyPair.PublicKey())
	if err != nil {
		log.Fatal(err)
	}

	// Alice can now encrypt messages under the Double Ratchet session.
	m := alice.RatchetEncrypt([]byte("Hi Bob!"), nil)

	// Which Bob can decrypt.
	plaintext, err := bob.RatchetDecrypt(m, nil)
	if err != nil {
		log.Fatal(err)
	}

	fmt.Println(string(plaintext))
}

Options

Additional options can be passed to constructors to customize the algorithm behavior:

doubleratchet.New(
    sk, keyPair,
    
    // Your own cryptography supplement implementing doubleratchet.Crypto.
    WithCrypto(c),
    
    // Custom storage for skipped keys implementing doubleratchet.KeysStorage.
    WithKeysStorage(ks),
    
    // The maximum number of skipped keys. Error will be raised in an attempt to store more keys
    // in a single chain while decrypting.
    WithMaxSkip(1200),
    
    // The number of Diffie-Hellman ratchet steps skipped keys will be stored.
    WithMaxKeep(90),
)

Header encryption

If you don't want anybody to see message ordering and your ratchet keys, you can utilize header encryption. It makes your communication even more secure in a sense that an eavesdropper can only see ciphertexts and nothing else. However, it adds more complexity to the implementation, namely:

  1. Parties should agree on 2 more secret keys for encrypting headers before the double ratchet session.
  2. When a recipient receives a message she must first associate the message with its relevant Double Ratchet session (assuming she has different sessions with different parties). How this is done is outside of the scope of this library, although the Pond protocol offers some ideas as stated in the Double Ratchet specification.
  3. Header encryption makes messages 48 bytes longer. For example, if you're sending message how are you? in a version without header encryption, it will be encrypted into iv + len(pt) + signature = 16 + 12 + 32 = 60 bytes plus a header rk + pn + n = 32 + 4 + 4 = 40 bytes with 100 bytes in total. In case of the header encryption modification the header will also be encrypted which will add 48 more bytes with the total of 148 bytes. Note that the longer your message, the more resulting length it takes.
  4. It does a bit more computations especially for skipped messages and will work more slowly.

Example

In order to create a header-encrypted session, parties should agree upon 3 different shared keys and Alice should know Bob's public key:

package main

import (
	"fmt"
	"log"

	"github.com/tiabc/doubleratchet"
)

func main() {
	// Shared keys both parties have already agreed upon before the communication.
	var (
		// The key for message keys derivation.
		sk = [32]byte{
			0xeb, 0x8, 0x10, 0x7c, 0x33, 0x54, 0x0, 0x20,
			0xe9, 0x4f, 0x6c, 0x84, 0xe4, 0x39, 0x50, 0x5a,
			0x2f, 0x60, 0xbe, 0x81, 0xa, 0x78, 0x8b, 0xeb,
			0x1e, 0x2c, 0x9, 0x8d, 0x4b, 0x4d, 0xc1, 0x40,
		}

		// Header encryption keys.
		sharedHka = [32]byte{
			0xbd, 0x29, 0x18, 0xcb, 0x18, 0x6c, 0x26, 0x32,
			0xd5, 0x82, 0x41, 0x2d, 0x11, 0xa4, 0x55, 0x87,
			0x1e, 0x5b, 0xa3, 0xb5, 0x5a, 0x6d, 0xe1, 0x97,
			0xde, 0xf7, 0x5e, 0xc3, 0xf2, 0xec, 0x1d, 0xd,
		}
		sharedNhkb = [32]byte{
			0x32, 0x89, 0x3a, 0xed, 0x4b, 0xf0, 0xbf, 0xc1,
			0xa5, 0xa9, 0x53, 0x73, 0x5b, 0xf9, 0x76, 0xce,
			0x70, 0x8e, 0xe1, 0xa, 0xed, 0x98, 0x1d, 0xe3,
			0xb4, 0xe9, 0xa9, 0x88, 0x54, 0x94, 0xaf, 0x23,
		}
	)

	keyPair, err := doubleratchet.DefaultCrypto{}.GenerateDH()
	if err != nil {
		log.Fatal(err)
	}

	// Bob MUST be created with the shared secret, shared header keys and a DH key pair.
	bob, err := doubleratchet.NewHE(sk, sharedHka, sharedNhkb, keyPair)
	if err != nil {
		log.Fatal(err)
	}

	// Alic MUST be created with the shared secret, shared header keys and Bob's public key.
	alice, err := doubleratchet.NewHEWithRemoteKey(sk, sharedHka, sharedNhkb, keyPair.PublicKey())
	if err != nil {
		log.Fatal(err)
	}

	// Encryption and decryption is done the same way as in the basic version.
	m := alice.RatchetEncrypt([]byte("Hi Bob!"), nil)

	plaintext, err := bob.RatchetDecrypt(m, nil)
	if err != nil {
		log.Fatal(err)
	}

	fmt.Println(string(plaintext))
}

License

MIT

About

The Double Ratchet Algorithm implementation in Go

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages