Skip to content

vicatcu/NanodeRF

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

60 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

NanodeRF - internet enabled base station

Builds on JeeLabs and EtherCard software. Thanks to JCW and Andrew Lindsay

To run these examples you will need:

The is a collaboration between OpenEnergyMonitor.org and Nanode.eu (Ken Boak)

This repo contains the firmware to allow a Nanodes equipped with a RFM12B breakout board or NanodeRF's with RFM12B onboard to received monitoring data from the emonTx and post the data online to emoncms.

The same frequency RFM12B's should be used on both the emonTx and NanodeRF, the frequency of the modules must also be set in the sketch.

Older version of the Nanode can be used with certain changes, see: http://openenergymonitor.org/emon/node/227

NanodeRF Code guide

The NanodeRF code guide goes through main components required to put a full base station firmware together. It's recommended that you work through these examples first so that you have a good understanding of how the full firmware's work.

The guide includes:

Full NanodeRF Firmware's

  • NanodeRF_multinode The multinode firmware is the most flexible firmware for posting data up to emoncms, it relays data from up to the 30 nodes that the rfm12 library implementation can handle up to emoncms. You dont need to re-program the firmware each time you add a new node or variables on a particular node. It constructs a CSV format string to be sent to emoncms.

  • NanodeRF_Power_RTCrelay_GLCDtemp This firmware was the standard firmware up until the addition of the multinode example. It's build specifically for use with one emontx and one emonglcd. One of its advantages is that it constructs a nice key:value pair json string to be sent to emoncms, which makes the emoncms inputs appear with the names: power1, power2, power3, voltage and so on. The disadvantage with this sketch is that is requires reprogramming if you want to add a new node or add new variables.

  • NanodeRF_Cosm Receive data from emonTx via RFM12B wireless and post to Cosum. Just insert your Cosm feed ID and API Key. Thanks to Roger James for this contribution. See forum thread for discussion: http://openenergymonitor.org/emon/node/376

Documentation Links:

About

emonBase (emonTx >> emoncms) examples using EtherCard library

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published