U-Boot RockChip rk3399

Status:

• Build SPM StandaloneMM from EDK2 with GCC5 (Reproducable)
• Build Optee with StandaloneMM support (Reproducable)
• Build TF-A with StandaloneMM support (DEBUG)
  • Transition to xlat_v2 to add dynamic translation table support (Builds)
  • Configure sm_mem_map regions (SEG_FAULT)
• Test Optee MM Communicate
• Setup Secure Bootflow:
  • U-Boot Secure boot with signed FIT -> TF-A -> Optee_MM -> UEFI Secure Boot
• Add support for ARM FFA MM
• Add support for infineon TPM

U-Boot Prebuilt Release v2024.07 W/ ATF lts-v2.10.4 & OP-TEE v4.3.0

Prebuilt u-boot-rockchip.bin & u-boot-rockchip-spi.bin are included in Builds/ for convenience

RockPro64 SPI U-Boot Assembler

Requirements:

• Debian based OS already running on an ARM64 CPU

• Any microSD in the /dev/mmcblk1 slot

Post-Build

Initial-Flash From Bypassed and Erased SPI (Recommended)

or Update-Flash From Existing U-Boot

Erase current SPI, then boot into U-Boot Via SD/eMMC with Combined SD

Stop Autoboot by hitting any key

Insert SD Card

Bypass SPI

reset

Wait untill you see the environment fail to load from SPI

Reconnect SPI

Stop Autoboot by hitting any key

sf probe

sf erase 0x0 0x1000000

reset

Stop Autoboot by hitting any key

ls mmc 1:1 /

load mmc 1:1 $kernel_addr_r u-boot-rockchip-spi.bin

sf probe

sf write $kernel_addr_r 0 $filesize

reset

Stop Autoboot by hitting any key

saveenv

reset