Releases: 1V-Oct/3318_the_centre_releases
v2.1.84
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.82 BETA - Only for TAIPO/TAMAR MIDI testing
- THIS VERSION MIGHT INTRODUCE MULTIPLE ISSUES, PLEASE DO NOT UPDATE IF NOT NECESSARY *
[MID] Added MIDI UI, Polyphony, Drum Rack
[RVB] Fixed crash
[WTO] Fixed problem with specific wavetables
[SYS] MIDI Engine reworked
v2.1.52
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.52
[VCF] Change of setting (in settings) didn't change filter name
v2.1.51
[WTO] Fixed default Octave to be 0
v2.1.49
[WT] Fixed problem with graphical display of wavetables
[SYS] Improved SD-card switch to fast mode
v2.1.41
[QNT] Added advanced quantiser with Scala (SCL) files (see users-manual.pdf)
[SMP] Added sample looping (grains) (see users-manual.pdf)
[SYS] Limited filesystem to 1000 entries per directory (folder)
[INP] Rounding in Inputs Display was off for OCT and NOTE
[ARP] Added gate off (see users-manual.pdf)
v2.1.32
[DRC] Overlay was not showing
[DRC] Added Gate button to waveform selector
[CLK] Graph blinking to BPM not to CLK rate
[ARP] Added setting to switch between fixed pattern or note length
[VCF] Removed DL, MG, LD, OP filters (JP Only)
[VCF] Rescaled BQ and COMB to full frequency
v2.1.30
[INP] Inputs follow kobs configuration
[VCF] Filters displays have been normalised
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.51
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.51
[WTO] Fixed default Octave to be 0
v2.1.49
[WT] Fixed problem with graphical display of wavetables
[SYS] Improved SD-card switch to fast mode
v2.1.41
[QNT] Added advanced quantiser with Scala (SCL) files (see users-manual.pdf)
[SMP] Added sample looping (grains) (see users-manual.pdf)
[SYS] Limited filesystem to 1000 entries per directory (folder)
[INP] Rounding in Inputs Display was off for OCT and NOTE
[ARP] Added gate off (see users-manual.pdf)
v2.1.32
[DRC] Overlay was not showing
[DRC] Added Gate button to waveform selector
[CLK] Graph blinking to BPM not to CLK rate
[ARP] Added setting to switch between fixed pattern or note length
[VCF] Removed DL, MG, LD, OP filters (JP Only)
[VCF] Rescaled BQ and COMB to full frequency
v2.1.30
[INP] Inputs follow kobs configuration
[VCF] Filters displays have been normalised
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.50
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.49
[WT] Fixed problem with graphical display of wavetables
[SYS] Improved SD-card switch to fast mode
v2.1.41
[QNT] Added advanced quantiser with Scala (SCL) files (see users-manual.pdf)
[SMP] Added sample looping (grains) (see users-manual.pdf)
[SYS] Limited filesystem to 1000 entries per directory (folder)
[INP] Rounding in Inputs Display was off for OCT and NOTE
[ARP] Added gate off (see users-manual.pdf)
v2.1.32
[DRC] Overlay was not showing
[DRC] Added Gate button to waveform selector
[CLK] Graph blinking to BPM not to CLK rate
[ARP] Added setting to switch between fixed pattern or note length
[VCF] Removed DL, MG, LD, OP filters (JP Only)
[VCF] Rescaled BQ and COMB to full frequency
v2.1.30
[INP] Inputs follow kobs configuration
[VCF] Filters displays have been normalised
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.41
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.41
[QNT] Added advanced quantiser with Scala (SCL) files (see users-manual.pdf)
[SMP] Added sample looping (grains) (see users-manual.pdf)
[SYS] Limited filesystem to 1000 entries per directory (folder)
[INP] Rounding in Inputs Display was off for OCT and NOTE
[ARP] Added gate off (see users-manual.pdf)
v2.1.32
[DRC] Overlay was not showing
[DRC] Added Gate button to waveform selector
[CLK] Graph blinking to BPM not to CLK rate
[ARP] Added setting to switch between fixed pattern or note length
[VCF] Removed DL, MG, LD, OP filters (JP Only)
[VCF] Rescaled BQ and COMB to full frequency
v2.1.30
[INP] Inputs follow kobs configuration
[VCF] Filters displays have been normalised
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.30
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.30
[INP] Inputs follow kobs configuration
[VCF] Filters displays have been normalised
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.21
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.21
[CLK] Added 16 and 8 CPQN clocks
[SYS] Added 16 and 8 CPQN clocks
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.20
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.20
[INP] Knobs in assign mode were not subject to new Settings
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.18
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.18
[INP] Proper naming of input names for multiple inputs with same name
[SYS] Pots behaviour configuration (see users-manual.pdf System Settings)
[VCF] Filter curve display modifications
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1
v2.1.6
Please watch introductory videos at:
https://www.youtube.com/playlist?list=PLn4dQ5nT5yxFH9R5nt0X9lMtQl5h2CFW6
Please see attached PDF manuals
v2.1.6
[EUC] Better offset management
[EUC] Fix for 1/64th note length
[CLK] (NEW) Output of clock to Audio Outoput (see users-manual.pdf)
[CLK] (NEW) External Clock Input (see users-manual.pdf)
[CLK] (NEW) BPM Sync (see users-manual.pdf)
v2.1.0
[SYS] Chnaged Reverese Encoder setting bahaviour. Now select from 4 modes. Also before not all settings affected.
[PCH] Colour changes
[SYS] Cleanup of setting saving
[SYS] Fixed buf for controlling Audio Output Destination from Patch (Edit) Menu
[OUT] Fixed blown-out channel when audio level exceeded expected range.
[OUT] Added Limiter Release control speed
[DRC] Fixed Drum Rack Mdoule (see users-manual.pdf)
[WTO] Increased quality of wavetable reproducition in Smoothing Mode (Slow)
[EUC] Removed reset of rhythms upon change of number of elements or offset
[ECA] ECA has been deprecated (use ENV + VCA instead) will be removed in next version
[PLY] Added display of number of steps
v2.0.15
[ARP] Added position control via external CV source (ignores all other settings)
[GAT] Added tiny indicators for gate positions
[QNT] Removed debug scales
v2.0.0
[SYS] Added File loding progress indicator for lengthy operations
[SYS] Improved UI performance
[ARP] Added Arpeggiator (see users-manual.pdf)
[SYS] Fixed conversion of notes to volatge
[EUC] Fixed Note lengths
[SYS] Fixed crash in filebrowser in certain scenarios
[VCF] Proper Note and CV Tracking
[SYS] Properly adjusted relationships between MIDI notes and Control Voltages
[SMP] Fixed clipping during pitch conversion
[DLY] Fixed clipping in some instances
[SYS] Changed VXP (Patch) fileformat to JSON
[LFS] Change of frequency visible when OSC not running
[LFS] Brand new shape editor (see users-manual.pdf)
[STO] Reworked big part of storing preset
[NOI] Limited range of filter frequencies
v1.99.23
[QNT] Added Key for predefined scales. Use L8 to change Key
[QNT] Use A8 to change CV input for quantiser
[PLY] Added Polyrhythm module (see users_manual.pdf)
[WTO] Fixed buffer overflow for very long tables
[ENV] Added Trigger mode for AHDR (AD) envelopes
[INP] Fixed problem with FINE NOTE control
v1.99.19 BREAKS PATCHES READ BELOW
[WTO] V/OCT inputs were giving note 0 for 0V. Changed to note 60 (Middle C). THIS BREAKS PATCHES
[WTO] Coarse frequency was adjusting notes 0-64. Changed to -12 to 12 semitones (+/- one octave)
[WTO] Fine Frequency now adjusts cents in range of +/- one semitone
v1.99.18
[LFS] Fixed Frequency Fine for adjusting frequency of LFS
[SYS] Settings were only saved on exit from System. Now saved on exit from Settings.
[SYS] Spelling mistake
[VCA] Added Sidechain
[WTO] Wrong initial fine tune value
v1.99.16
[UI] Added indicator for knob name in overlay
v1.99.12
[SET] Added setting to control overlay time
[QNT] Use of knobs to control quantiser
v1.99.05 HOTFIX
[INP] BUG: CV 1-4 were shifted to CV 5-8
v1.99.00
v1.31.xx
[SYS] Scanning time for CV inputs reworked and improved greatly
[SYS] Added notifications to some commands
[SYS] Reworked problems with build system
[INP] Fine Tune of V/OCT working now
[WTO] Fixed error loading broken tables causing device lockup
[MIX] Fully redone User Interface
[SHP] Fixed problem loading longer shapes
[WTO] Improved sound quality (less aliasing)
[UI] Fully redone User Interface in all modules
[PCH] Added Edit menu to modify output with ATT8 and Input with ATT1