Merge pull request #6164 from ashok-rao/br-BL652

Adding Laird BL652 as new target

targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_MTB_LAIRD_BL652/PinNames.h

@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  3
+
+typedef enum {
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,
+    p31 = 31,
+
+
+    P0_0  = p0,
+    P0_1  = p1,
+    P0_2  = p2,
+    P0_3  = p3,
+    P0_4  = p4,
+    P0_5  = p5,
+    P0_6  = p6,
+    P0_7  = p7,
+
+    P0_8  = p8,
+    P0_9  = p9,
+    P0_10 = p10,
+    P0_11 = p11,
+    P0_12 = p12,
+    P0_13 = p13,
+    P0_14 = p14,
+    P0_15 = p15,
+
+    P0_16 = p16,
+    P0_17 = p17,
+    P0_18 = p18,
+    P0_19 = p19,
+    P0_20 = p20,
+    P0_21 = p21,
+    P0_22 = p22,
+    P0_23 = p23,
+
+    P0_24 = p24,
+    P0_25 = p25,
+    P0_26 = p26,
+    P0_27 = p27,
+    P0_28 = p28,
+    P0_29 = p29,
+    P0_30 = p30,
+    P0_31 = p31,
+
+   // Module pins. Refer datasheet for pin numbers.
+    SIO_1 = P0_1,
+    SIO_2 = P0_2,
+    SIO_3 = P0_3,
+    SIO_4 = P0_4,
+    SIO_5 = P0_5,
+    SIO_6 = P0_6,
+    SIO_7 = P0_7,
+    SIO_8 = P0_8,
+    SIO_9 = P0_9,   //NFC1
+    SIO_10 = P0_10,  //NFC2
+    SIO_11 = P0_11,
+    SIO_12 = P0_12,
+    SIO_13 = P0_13,
+    SIO_14 = P0_14,
+    SIO_15 = P0_15,
+    SIO_16 = P0_16,
+    SIO_17 = P0_17,
+    SIO_18 = P0_18,
+    SIO_19 = P0_19,
+    SIO_20 = P0_20,
+
+    SIO_22 = P0_22,
+    SIO_23 = P0_23,
+    SIO_24 = P0_24,
+    SIO_25 = P0_25,
+    SIO_26 = P0_26,
+    SIO_27 = P0_27,
+    SIO_28 = P0_28,
+    SIO_29 = P0_29,
+    SIO_30 = P0_30,
+    SIO_31 = P0_31,
+    SIO_0 = P0_0,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    //Mbed MTB pin defines.
+    P_1 = NC,
+    P_2 = SIO_24,  //MISO
+    P_3 = SIO_23,  //MOSI
+    P_4 = SIO_22,
+//    P_5 = SWDIO,
+//    P_6 = SWDCLK,
+//    P_7 = NRST,
+    P_8 = SIO_20,
+    P_9 = SIO_18,
+    P_10 = SIO_16,
+    P_11 = SIO_14,
+    P_12 = SIO_12,
+    P_13 = SIO_11,
+    P_14 = SIO_10,
+    P_15 = SIO_9,
+    P_16 = NC,
+    P_17 = SIO_8,
+    P_18 = SIO_7,
+    P_19 = SIO_6,
+    P_20 = SIO_5,
+    P_21 = SIO_4,
+    P_22 = SIO_3,
+    P_23 = SIO_2,
+    P_24 = SIO_1,
+    P_25 = SIO_0,
+    P_26 = NC,
+    P_27 = NC,
+    P_28 = SIO_13,
+    P_29 = SIO_15,
+    P_30 = SIO_17,
+    P_31 = SIO_19,
+    P_32 = SIO_31,
+    P_33 = SIO_30,
+    P_34 = SIO_29,
+    P_35 = SIO_28,
+    P_36 = SIO_27,
+    P_37 = SIO_26,
+    P_38 = SIO_25,
+    P_39 = NC,
+
+    //LEDs
+    LED1 = SIO_28,
+    LED2 = SIO_29,
+    LED3 = SIO_30,
+    LED_RED = LED1,
+    LED_GREEN = LED2,
+    LED_BLUE = LED3,
+
+    GP0 = SIO_11,
+    //Standardized button name
+    BUTTON1 = GP0,
+
+    //Nordic SDK pin names 
+    RX_PIN_NUMBER = SIO_8,
+    TX_PIN_NUMBER = SIO_6,
+    CTS_PIN_NUMBER = SIO_7,
+    RTS_PIN_NUMBER = SIO_5,
+
+    // mBed interface Pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER,
+
+    SPI_MOSI = SIO_23,
+    SPI_MISO = SIO_24,
+    SPI_SS0 = SIO_17, //CS for LCD on MTB
+    SPI_SS1 = SIO_10, //CS for SD card on MTB
+    SPI_SCK1 = SIO_25,
+    SPI_SCK2 = SIO_31,
+
+    //Default SPI
+    SPI_SCK = SPI_SCK1,
+    SPI_CS = SPI_SS1,
+
+    I2C_SDA = SIO_26,
+    I2C_SCL = SIO_27,
+
+    //MTB aliases
+    GP1    = SIO_13,
+    AIN0  = SIO_2,
+    AIN1  = SIO_3,
+    AIN2  = SIO_4,
+    GP2    = SIO_10,
+    GP3    = SIO_9,
+    GP4     = SIO_22,
+    GP5     = SIO_19, //A0 for LCD on MTB
+    GP6     = SIO_18, //RESET for LCD on MTB
+    GP7     = SIO_17,
+    GP8     = SIO_15,
+
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_MTB_LAIRD_BL652/device.h

@@ -0,0 +1,23 @@
+// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches.
+// Check the 'features' section of the target description in 'targets.json' for more details.
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#include "objects.h"
+
+#endif

targets/targets.json

@@ -3535,6 +3535,29 @@
             }
         }
     },
+    "MTB_LAIRD_BL652": {
+        "inherits": ["MCU_NRF52"],
+        "macros_add": ["BOARD_PCA10040", "NRF52_PAN_12", "NRF52_PAN_15", "NRF52_PAN_58", "NRF52_PAN_55", "NRF52_PAN_54", "NRF52_PAN_31", "NRF52_PAN_30", "NRF52_PAN_51", "NRF52_PAN_36", "NRF52_PAN_53", "S132", "CONFIG_GPIO_AS_PINRESET", "BLE_STACK_SUPPORT_REQD", "SWI_DISABLE0", "NRF52_PAN_20", "NRF52_PAN_64", "NRF52_PAN_62", "NRF52_PAN_63"],
+        "device_has_add": ["ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+        "extra_labels_add": ["MTB_LAIRD_BL652"],
+        "release_versions": ["5"],
+        "device_name": "nRF52832_xxAA",
+        "bootloader_supported": true,
+        "config": {
+            "usb_tx": {
+                "help": "Value SIO_06",
+                "value": "SIO_6"
+            },
+            "usb_rx": {
+                "help": "Value SIO_08",
+                "value": "SIO_8"
+            }
+        },
+        "overrides": {
+            "lf_clock_src": "NRF_LF_SRC_RC",
+            "uart_hwfc": 0
+        }
+    },
     "DELTA_DFBM_NQ620": {
         "supported_form_factors": ["ARDUINO"],
         "inherits": ["MCU_NRF52"],