Features and Roadmap

Xin Liu edited this page Aug 17, 2018 · 8 revisions

There will be periodic SONiC Roadmap planning sessions. These will define the new capabilities to be delivered by the SONiC project in its next release. It's expected that new feature contributions will be aligned with the roadmap.

Pull requests for features that are not in the roadmap may not be accepted into the project. This is to help ensure the project can produce a stable, reliable release and make progress.

Release Release Date SAI version Features Included
SONiC.201705 5/15/2017 0.9.4 BGP
ECMP
LAG
LLDP
QoS - ECN
QoS - RDMA
Priority Flow Control
WRED
COS
SNMP
Syslog
Sysdump
NTP
COPP
DHCP Relay Agent
SONiC to SONiC upgrade
Multiple Images support
One Image
SONiC.201709 9/15/2017 0.9.4 VLAN
ACL permit/deny
IPv6
Tunnel Decap
Mirroring
Post Speed Setting
BGP Graceful restart helper
BGP MP
SONiC.201712 12/15/2017 1.0 Fast Reload
SONiC Support SAI 1.0
TACACS+
LACP Fallback
MTU Setting
Vlan Trunk
Static Port breakout1
Dynamic ACL Upgrade
SWSS Unit Test Framework
CobfigDB framework
SONiC.201803 03/15/18 1.2
Critical Resource Monitoring
MAC Aging
IPv6 ACL
BGP/Neighbor-down fib-accelerate
PFC WD
SONiC.201807 07/30/18 1.3
gRPC
Dtel support (Barefoot best effort)
SONiC Architecture and User Manual (Documentation)
Sensor transceiver monitoring
LLDP extended MIB: lldpremtable, lldplocporttable, lldpremmanaddrtable, lldplocmanaddrtable, lldplocporttable, lldpLocalSystemData
SONiC.201809 09/15/18 1.3 (TDB)
Debian Kernel Upgrade to 4.9
Warm Reboot (best effort)
CLI framework
Asymmetric PFC
Routing Stack Graceful Restart
Incremental Config (IP, LAG, Port shut/unshut
Backlog
Port breakout (more platform support)
FRR
IPv6 Link Local
Call for Contribution
sFlow (Taken)
VRF (Taken)
Vxlan (Taken)
L3 MLAG (Taken)
EVPN

NOTE

  1. Not available on Broadcom platform
Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.