Update module github.com/lestrrat-go/jwx to v2

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
github.com/lestrrat-go/jwx	v1.2.29 -> v2.1.0

---

Release Notes

lestrrat-go/jwx (github.com/lestrrat-go/jwx)

v2.1.0

Compare Source

v2.1.0 18 Jun 2024
[New Features]
  * [jwt] Added `jwt.ParseCookie()` function
  * [jwt] `jwt.ParseRequest()` can now accept a new option, jwt.WithCookieKey() to
    specify a cookie name to extract the token from.
  * [jwt] `jwt.ParseRequest()` and `jwt.ParseCookie()` can accept the `jwt.WithCookie()` option,
    which will, upon successful token parsing, make the functions assign the *http.Cookie
    used to parse the token. This allows users to further inspect the cookie where the
    token came from, should the need arise.
  * [jwt] (BREAKING CHANGE) `jwt.ParseRequest()` no longer automatically looks for "Authorization" header when
    only `jwt.WithFormKey()` is used. This behavior is the same for `jwt.WithCookieKey()` and
    any similar options that may be implemented in the future.
### previously
      jwt.ParseRequest(req) // looks under Authorization
      jwt.ParseReuqest(req, jwt.WithFormKey("foo")) // looks under foo AND Authorization
      jwt.ParseReuqest(req, jwt.WithHeaderKey("Authorization"), jwt.WithFormKey("foo")) // looks under foo AND Authorization
### since this release
      jwt.ParseRequest(req) // same as before
      jwt.ParseRequest(req, jwt.WithFormKey("foo")) // looks under foo
      jwt.ParseReuqest(req, jwt.WithHeaderKey("Authorization"), jwt.WithFormKey("foo")) // looks under foo AND Authorization

  * [jwt] Add `jwt.WithResetValidators()` option to `jwt.Validate()`. This option
    will allow you to tell `jwt.Validate()` to NOT automatically check the
    default validators (`iat`, `exp`, and `nbf`), so that you can completely customize
    the validation with the validators you specify using `jwt.WithValidator()`.

    This sort of behavior is useful for special cases such as 
    https://openid.net/specs/openid-connect-rpinitiated-1_0.html. However, you SHOULD NOT
    use this option unless you know exactly what you are doing, as this will pose
    significant security issues when used incorrectly.
 
   * [jwk] Provide a _stop-gap_ measure to work with PEM format ASN.1 DER encoded secp256k1 keys.
  
    In order to enable this feature, you must compile jwx with TWO build tags:
    `jwx_es256k` to enable ES256K/secp256k1, and `jwx_secp256k1_pem` to enable PEM handling.
    Not one, but BOTH tags need to be present.

    With this change, by suppliying the `WithPEM(true)` option, `jwk.Parse()` is now
    able to read sep256k1 keys. Also, `jwk.Pem()` should be able to handle `jwk.Key` objects
    that represent a secp256k1 key.

    Please do note that the implementation of this feature is dodgy at best. Currently
    Go's crypto/x509 does not allow handling additional EC curves, and thus in order to
    accomodate secp256k1 keys in PEM/ASN.1 DER format we need to "patch" the stdlib.
    We do this by copy-and-pasting relevant parts of go 1.22.2's crypto/x509 code and
    adding the minimum required code to make secp256k1 keys work.

    Because of the above, there are several important caveats for this feature:

    1. This feature is provided solely as a stop-gap measure until such time Go's stdlib
    provides a way to handle non-standard EC curves, or another external module
    is able to solve this issue. 

    2. This feature should be considered unstable and not guaranteed by semantic versioning
    backward compatibility. At any given point we may drop or modify this feature. It may be
    because we can no longer maintain the code, or perhaps a security issue is found in the
    version of the code that we ship with, etc.
 
     3. Please always remember that we are now bundling a static set of code for handling
    x509 formats. You are taking a possible security risk by code that could be outdated.
    Please always do your own research, and if possible, please notify us if the bundled
    code needs to be updated. Unless you know what you are doing, it is not recommended
    that you enable this feature.

    4. Please note that because we imported the code from go 1.22's src/crypto/x509,
    it has some go1.20-isms in its code. Therefore you will not be able to use the
    `jwx_secp256k1_pem` tag to enable secp256k1 key PEM handling against codebases
    that are built using go 1.19 and below (the build will succeed, but the feature
    will be unavailable).

    5. We have no plans to include more curves this way. One is already one too many.

  * [jwe] Fixed a bug when using encryption algorithms involving PBES2 along with the
    jwx.WithUseNumber() global option. Enabling this option would turn all values
    stored in the JSON content to be of type `json.Number`, but we did not account for
    it when checking for the value of `p2c` header, resulting in a conversion error.

v2.0.21

Compare Source

v2.0.21 07 Mar 2024

[Security]

• [jwe] Added jwe.Settings(jwe.WithMaxDecompressBufferSize(int64)) to specify the
  maximum size of a decompressed JWE payload. The default value is 10MB. If you
  are compressing payloads greater than this and want to decompress it during
  a call to jwe.Decrypt, you need to explicitly set a value large enough to
  hold that data.

  The same option can be passed to jwe.Decrypt to control this behavior on
  a per-message basis.

• [jwe] Added documentation stating that jwe.WithMaxBufferSize option will be
  renamed in future versions, i.e. v3

v2.0.20

Compare Source

v2.0.20 20 Feb 2024

[New Features]

• [jwe] Added jwe.Settings(WithMaxBufferSize(int64)) to set the maximum size of
  internal buffers. The default value is 256MB. Most users do not need to change
  this value.
• [jws] Allow jws.WithCompact() and jws.WithJSON() to be passed to jws.Parse() and
  jws.Verify(). These options control the expected serialization format for the
  JWS message.
• [jwt] Add jwt.WithCompactOnly() to specify that only compact serialization can
  be used for jwt.Parse(). Previously, by virtue of jws.Parse() allowing either
  JSON or Compact serialization format, jwt.Parse() also alloed JSON serialization
  where as RFC7519 explicitly states that only compact serialization should be
  used. For backward compatibility the default behavior is not changed, but you
  can set this global option for jwt: jwt.Settings(jwt.WithCompactOnly(true))

[Miscellaneous]

• Internal key conversions should now allow private keys to be used in place of
  public keys. This would allow you to pass private keys where public keys are
  expected.

v2.0.19

Compare Source

v2.0.19 09 Jan 2024
[New Features]
  * [jws] Added jws.IsVerificationError to check if the error returned by `jws.Verify`
    was caused by actual verification step or something else, for example, while fetching
    a key from datasource

[Security Fixes]
  * [jws] JWS messages formated in full JSON format (i.e. not the compact format, which
    consists of three base64 strings concatenated with a '.') with missing "protected"
    headers could cause a panic, thereby introducing a possiblity of a DoS.

    This has been fixed so that the `jws.Parse` function succeeds in parsing a JWS message
    lacking a protected header. Calling `jws.Verify` on this same JWS message will result
    in a failed verification attempt. Note that this behavior will differ slightly when
    parsing JWS messages in compact form, which result in an error.

v2.0.18

Compare Source

v2.0.18 03 Dec 2023
[Security Fixes]
  * [jwe] A large number in p2c parameter for PBKDF2 based encryptions could cause a DoS attack,
    similar to https://nvd.nist.gov/vuln/detail/CVE-2022-36083.  All users who use JWE via this
    package should upgrade. While the JOSE spec allows for encryption using JWE on JWTs, users of
    the `jwt` package are not immediately susceptible unless they explicitly try to decrypt
    JWTs -- by default the `jwt` package verifies signatures, but does not decrypt messages.
    [GHSA-7f9x-gw85-8grf]

v2.0.17

Compare Source

v2.0.17 20 Nov 2023
[Bug Fixes]
  * [jws] Previously, `jws.UnregisterSigner` did not remove the previous signer instance when
    the signer was registered and unregistered multiple times (#​1016). This has been fixed.

[New Features]
  * [jwe] (EXPERIMENTAL) `jwe.WithCEK` has been added to extract the content encryption key (CEK) from the Decrypt operation.
  * [jwe] (EXPERIMENTAL) `jwe.EncryptStatic` has been added to encrypt content using a static CEK.
    Using static CEKs has serious security implications, and you should not use
    this unless you completely understand the risks involved.

v2.0.16

Compare Source

v2.0.16 31 Oct 2023
[Security]
  * [jws] ECDSA signature verification requires us to check if the signature
    is of the desired length of bytes, but this check that used to exist before
    had been removed in #​65, resulting in certain malformed signatures to pass
    verification.

    One of the ways this could happen if R is a 31 byte integer and S is 32 byte integer,
    both containing the correct signature values, but R is not zero-padded.

       Correct = R: [ 0 , ... ] (32 bytes) S: [ ... ] (32 bytes)
       Wrong   = R: [ ... ] (31 bytes)     S: [ ... ] (32 bytes)

    In order for this check to pass, you would still need to have all 63 bytes
    populated with the correct signature. The only modification a bad actor
    may be able to do is to add one more byte at the end, in which case the
    first 32 bytes (including what would have been S's first byte) is used for R,
    and S would contain the rest. But this will only result in the verification to
    fail. Therefore this in itself should not pose any security risk, albeit
    allowing some illegally formated messages to be verified.

  * [jwk] `jwk.Key` objects now have a `Validate()` method to validate the data
    stored in the keys. However, this still does not necessarily mean that the key's
        are valid for use in cryptographic operations. If `Validate()` is successful,
    it only means that the keys are in the right _format_, including the presence
    of required fields and that certain fields have proper length, etc.

[New Features]
  * [jws] Added `jws.WithValidateKey()` to force calling `key.Validate()` before
    signing or verification.

  * [jws] `jws.Sign()` now returns a special type of error that can hold the
    individual errors from the signers. The stringification is still the same
    as before to preserve backwards compatibility.

  * [jwk] Added `jwk.IsKeyValidationError` that checks if an error is an error
    from `key.Validate()`.

[Bug Fixes]
  * [jwt] `jwt.ParseInsecure()` was running verification if you provided a key
    via `jwt.WithKey()` or `jwt.WithKeySet()` (#​1007)

v2.0.15

Compare Source

v2.0.15 19 20 Oct 2023
[Bug fixes]
  * [jws] jws.Sign() now properly check for valid algorithm / key type pair when
    the key implements crypto.Signer. This was caused by the fact that when 
    jws.WithKey() accepted keys that implemented crypto.Signer, there really
    is no way to robustly check what algorithm the crypto.Signer implements.

    The code has now been modified to check for KNOWN key types, i.e. those
    that are defined in Go standard library, and those that are defined in
    this library. For example, now calling jws.Sign() with jws.WithKey(jwa.RS256, ecdsaKey)
    where ecdsaKey is either an instance of *ecdsa.PrivateKey or jwk.ECDSAPrivateKey
    will produce an error.

    However, if you use a separate library that wraps some KMS library which implements
    crypto.Signer, this same check will not be performed due to the fact that
    it is an unknown library to us. And there's no way to query a crypto.Signer
    for its algorithm family.

v2.0.14

Compare Source

v2.0.14 17 Oct 2023
  [New Features]
  * [jwk] jwk.IsPrivateKey(), as well as jwk.AsymmetricKey has been added.
    The function can be used to tell if a jwk.Key is a private key of an
    asymmetric key pair.
  [Security]
  * golang.org/x/crypto has been updated to 0.14.0. The update contains a fix for HTTP/2
    rapid reset DoS vulnerability, which some security scanning softwares may flag.
    However, do note that this library is NOT affected by the issue, as it does not have
    the capability to serve as an HTTP/2 server. This is included in this release
    document so that users will be able to tell why this library may be flagged
    when/if their scanning software do so.

v2.0.13

Compare Source

v2.0.13 26 Sep 2023
[New Features]
  * [jwk] jwk.Equal has been added. Please note that this is equivalent to
  comparing the keys' thumbprints, therefore it does NOT take in consideration
  non-essential fields.

[Miscellaneous]
  * Various documentation fixes and additions.

v2.0.12

Compare Source

v2.0.12 - 11 Aug 2023
[Bug fixes]
  * [jwt] jwt.Serializer was ignoring JWE flags (#​951)

[Miscellaneous]
  * [jwk] Check for seed length on OKP JWKs to avoid panics (#​947)
  * [jws] Documentation for jws.WithKeySet()

v2.0.11: [SECURITY] v2.0.11

Compare Source

v2.0.11 - 14 Jun 2023
[Security]
  * Potential Padding Oracle Attack Vulnerability and Timing Attack Vulnerability
    for JWE AES-CBC encrypted payloads affecting all v2 releases up to v2.0.10,
    all v1 releases up to v1.2.25, and all v0 releases up to v0.9.2 have been reported by
    @​shogo82148.

    Please note that v0 versions will NOT receive fixes.
    This release fixes these vulnerabilities for the v2 series.

v2.0.10

Compare Source

v2.0.10 - 12 Jun 2023
[New Features]
  * [jwe] (EXPERIMENTAL) Added `jwe.KeyEncrypter` and `jwe.KeyDecrypter` interfaces
    that works in similar ways as how `crypto.Signer` works for signature
    generation and verification. It can act as the interface for your encryption/decryption
    keys that are for example stored in an hardware device.

    This feature is labeled experimental because the API for the above interfaces have not
    been battle tested, and may need to changed yet. Please be aware that until the API
    is deemed stable, you may have to adapat our code to these possible changes,
    _even_ during minor version upgrades of this library.

[Bug fixes]
  * Registering JWS signers/verifiers did not work since v2.0.0, because the
     way we handle algorithm names changed in 2aa98ce6884187180a7145b73da78c859dd46c84.
    (We previously thought that this would be checked by the example code, but it
     apparently failed to flag us properly)

    The logic behind managing the internal database has been fixed, and
    `jws.RegisterSigner` and `jws.RegisterVerifier` now properly hooks into the new
    `jwa.RegisterSignatureAlgorithm` to automatically register new algorithm names
    (#​910, #​911)
[Miscellaneous]
  * Added limited support for github.com/segmentio/asm/base64. Compile your code
    with the `jwx_asmbase64` build tag. This feature is EXPERIMENTAL.

    Through limited testing, the use of a faster base64 library provide 1~5% increase
    in throughput on average. It might make more difference if the input/output is large.
    If you care about this performance improvement, you should probably enable
    `goccy` JSON parser as well, by specifying `jwx_goccy,jwx_asmbase64` in your build call.
  * Slightly changed the way global variables underneath `jwk.Fetch` are initialized and
    configured. `jwk.Fetch` creates an object that spawns wokers to fetch JWKS when it's
    first called.
    You can now also use `jwk.SetGlobalFetcher()` to set a fetcher object which you can
    control.

v2.0.9

Compare Source

v2.0.9 - 21 Mar 2023
[Security Fixes]
  * Updated use of golang.org/x/crypto to v0.7.0
[Bug fixes]
  * Emitted PEM file for EC private key types used the wrong PEM armor (#​875)
[Miscellaneous]
  * Banners for generated files have been modified to allow tools to pick them up (#​867)
  * Remove unused variables around ReadFileOption (#​866)
  * Fix test failures
  * Support bazel out of the box
  * Now you can create JWS messages using `{"alg":"none"}`, by calling `jws.Sign()`
    with `jws.WithInsecureNoSignature()` option. (#​888, #​890).

    Note that there is no way to call
    `jws.Verify()` while allowing `{"alg":"none"}` as you wouldn't be _verifying_
    the message if we allowed the "none" algorithm. `jws.Parse()` will parse such
    messages witout verification.

    `jwt` also allows you to sign using alg="none", but there's no symmetrical
    way to verify such messages.

v2.0.8

Compare Source

v2.0.8 - 25 Nov 2022
[Security Fixes]
  * [jws][jwe] Starting from go 1.19, code related to elliptic algorithms
    panics (instead of returning an error) when certain methods
    such as `ScalarMult` are called using points that are not on the
    elliptic curve being used.

    Using inputs that cause this condition, and you accept unverified JWK
    from the outside it may be possible for a third-party to cause panics
    in your program.

    This has been fixed by verifying that the point being used is actually
    on the curve before such computations (#​840)
[Miscellaneous]
  * `jwx.GuessFormat` now returns `jwx.InvalidFormat` when the heuristics
    is sure that the buffer format is invalid.

v2.0.7

Compare Source

v2.0.7 - 15 Nov 2022
[New features]
  * [jwt] Each `jwt.Token` now has an `Options()` method
  * [jwt] `jwt.Settings(jwt.WithFlattenedAudience(true))` has a slightly
    different semantic than before. Instead of changing a global variable,
    it now specifies that the default value of each per-token option for
    `jwt.FlattenAudience` is true.

    Therefore, this is what happens:

       // No global settings
       tok := jwt.New()
       tok.Options.IsEnabled(jwt.FlattenAudience) // false

       // With global settings
       jwt.Settings(jwt.WithFlattenedAudience(true))
       tok := jwt.New()
       tok.Options.IsEnabled(jwt.FlattenAudience) // true
       // But you can still turn FlattenAudience off for this
       // token alone
       tok.Options.Disable(jwt.FlattenAudience)

    Note that while unlikely to happen for users relying on the old behavior,
    this change DOES introduce timing issues: whereas old versions switched the
    JSON marshaling for ALL tokens immediately after calling `jwt.Settings`,
    the new behavior does NOT affect tokens that have been created before the
    call to `jwt.Settings` (but marshaled afterwards).

    So the following may happen:

      // < v2.0.7
      tok := jwt.New()
      jwt.Settings(jwt.WithFlattenedAudience(true))
      json.Marshal(tok) // flatten = on

      // >= v2.0.7
      tok := jwt.New() // flatten = off
      jwt.Settings(jwt.WithFlattenedAudience(true))
      json.Marshal(tok) // flatten = on

      // >= v2.0.7
      tok := jwt.New() // flatten = off
      jwt.Settings(jwt.WithFlattenedAudience(true))
      json.Marshal(tok) // flatten is still off

    It is recommended that you only set the global setting once at the
    very beginning of your program to avoid problems.

    Also note that `Clone()` copies the settings as well.

v2.0.6

Compare Source

v2.0.6 - 25 Aug 2022
[Bug fixes][Security]
  * [jwe] Agreement Party UInfo and VInfo (apv/apu) were not properly being
    passed to the functions to compute the aad when encrypting using ECDH-ES
    family of algorithms. Therefore, when using apu/apv, messages encrypted
    via this module would have failed to be properly decrypted.

    Please note that bogus encrypted messages would not have succeed being
    decrypted (i.e. this problem does not allow spoofed messages to be decrypted).
    Therefore this would not have caused unwanted data to to creep in --
    however it did pose problems for data to be sent and decrypted from this module
    when using ECDH-ES with apu/apv.

    While not extensively tested, we believe this regression was introduced
    with the v2 release.

v2.0.5

Compare Source

v2.0.5 - 11 Aug 2022
[Bug fixes]
  * [jwt] Remove stray debug log
  * [jwk] Fix x5u field name, caused by a typo
  * [misc] Update golangci-lint action to v3; v2 was causing weird problems

v2.0.4

Compare Source

v2.0.4 - 19 Jul 2022
[Bug Fixes]
  * [jwk] github.com/lestrrat-go/httprc, which jwk.Cache depends on,
    had a problem with inserting URLs to be re-fetched into its queue.
    As a result it could have been the case that some JWKS were not
    updated properly. Please upgrade if you use jwk.Cache.

  * [jwk] cert.Get could fail with an out of bounds index look up

  * [jwk] Fix doc buglet in `KeyType()` method

[New Features]
  * [jws] Add `jws.WithMultipleKeysPerKeyID()` sub-option to allow non-unique
    key IDs in a given JWK set. By default we assume that a key ID is unique
    within a key set, but enabling this option allows you to handle JWK sets
    that contain multiple keys that contain the same key ID.

  * [jwt] Before v2.0.1, sub-second accuracy for time based fields
    (i.e. `iat`, `exp`, `nbf`) were not respected. Because of this the code
    to evaluate this code had always truncated any-subsecond portion
    of these fields, and therefore no sub-second comparisons worked.
    A new option for validation `jwt.WithTruncation()` has been added
    to workaround this. This option controls the value used to truncate
    the time fields. When set to 0, sub-second comparison would be
    possible.
    FIY, truncatation will still happen because we do not want to
    use the monotonic clocks when making comparisons. It's just that
    truncating using `0` as its argument effectively only strips out
    the monotonic clock

v2.0.3

Compare Source

v2.0.3 - 13 Jun 2022
[Bug Fixes]
  * [jwk] Update dependency on github.com/lestrrat-go/httprc to v1.0.2 to
    avoid unintended blocking in the update goroutine for jwk.Cache

v2.0.2

Compare Source

v2.0.2 - 23 May 2022
[Bug Fixes][Security]
  * [jwe] An old bug from at least 7 years ago existed in handling AES-CBC unpadding,
    where the unpad operation might remove more bytes than necessary (#​744)
    This affects all jwx code that is available before v2.0.2 and v1.2.25.

[New Features]
  * [jwt] RFC3339 timestamps are also accepted for Numeric Date types in JWT tokens.
    This allows users to parse servers that errnously use RFC3339 timestamps in
    some pre-defined fields. You can change this behavior by setting
    `jwt.WithNumericDateParsePedantic` to `false`
  * [jwt] `jwt.WithNumericDateParsePedantic` has been added. This is a global
    option that is set using `jwt.Settings`

v2.0.1

Compare Source

v2.0.1 - 06 May 2022
  * [jwk] `jwk.Set` had erronously been documented as not returning an error
    when the same key already exists in the set. This is a behavior change
    since v2, and it was missing in the docs (#​730)
  * [jwt] `jwt.ErrMissingRequiredClaim` has been deprecated. Please use
    `jwt.ErrRequiredClaim` instead.
  * [jwt] `jwt.WithNumericDateParsePrecision` and `jwt.WithNumericDateFormatPrecision`
    have been added to parse and format fractional seconds. These options can be
    passed to `jwt.Settings`.
    The default precision is set to 0, and fractional portions are not parsed nor
    formatted. The precision may be set up to 9.
  * `golang.org/x/crypto` has been upgraded (#​724)
  * `io/ioutil` has been removed from the source code.

v2.0.0

Compare Source

v2 has many incompatibilities with v1. To see the full list of differences between
v1 and v2, please read the Changes-v2.md file (https://github.com/lestrrat-go/jwx/blob/develop/v2/Changes-v2.md)

v2.0.0 - 24 Apr 2022
  * This i the first v2 release, which represents a set of design changes
    that were learnt over the previous 2 years. As a result the v2 API
    should be much more consistent and uniform across packages, and
    should be much more flexible to accomodate real-world needs.

    For a complete list of changes, please see the Changes-v2.md file,
    or check the diff at https://github.com/lestrrat-go/jwx/compare/v1...v2

[Miscellaneous]
  * Minor house cleaning on code generation tools

[jwt]
  * `jwt.ErrMissingRequiredClaim()` has been added

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.

[renovate]

ℹ Artifact update notice

File name: go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 2 additional dependencies were updated

Details:

Package	Change
github.com/decred/dcrd/dcrec/secp256k1/v4	v4.2.0 -> v4.3.0
github.com/goccy/go-json	v0.10.2 -> v0.10.3