1.0rc6

1.0rc6 aka Release Candidate 6 - 2020-03-11

Added

• This is a hard fork/breaking change from RC5. TXCH Coins will not be moved forward but your plots and keys and parts of your configuration do. We will be testing the final mainnet release strategy with the launch of RC6. For the test, those who are comfortable running the dev branch will update and start up their farms. All harvesters and plots will load and until the green flag drops, peers will be gossiped so your farm can establish good network connectivity. When the flag drops, each node will pull down the signed genesis challenge and start farming. Block 1 will be broadcast to anyone who hasn't seen the flag drop yet. The only difference for mainnet is that there will be 1.0 installers and a main branch release more than 24 hours before the real green flag.
• There is now basic plot queueing functionality in the GUI. By default, plotting works as it has in the past. However you can now name a queue in Step 2 Advanced Options. Chose something like first. Everything you add to the first queue will start up like it has in the past but now you can go through the steps again and create a queue named second and it will immediately start plotting as if it is unaware of and parallel with first. A great use case is that you would set first to plot 5 plots sequentially and then you'd set second to plot 5 sequentially and that would give you two parallel queues of 5 plot's each. We will be returning to plotting speed and UI soon. Thanks @jespino for this clever work around for now.
• There is now an option on the Farm page to manage your farming rewards receive addresses. This makes it easy to send your farming rewards to an offline wallet. This also checks your existing rewards addresses and warns if you do not have the matching private key. That is expected if you are using an offline wallet of course.
• Functionally has been added to the farmer rpc including checking and changing your farming rewards target addresses.
• Added the ability to translate material-ui components like Row 1 of 10. Thanks @jespino.
• Arch linux support has been added to sh install.sh. Thanks @jespino.
• Update FullBlock to Allow Generator References - a list of block heights of generators to be made available to the block program of the current block at generator runtime. This sets the stage for smart coins calling existing "libraries" already on the chain to lower fees and increase the scale of complex smart coins.

Changed

• Remove chia plots "-s" "--stripe_size" and the strip size setting in the Advanced section of the GUI. We now always use the best default of 64K for the GUI and cli.
• chia keys add takes secret words a prompt on the command line or stdin instead of command line arguments for security.
• Version 1.0.1 of chiavdf was added. This brought MPIR on Windows to the most recent release. Additionally we removed inefficient ConvertIntegerToBytes() and ConvertBytesToInt() functions, use GMP library's mpz_export/mpz_import for big integers and simple helper functions for built-in integer types. The latter are taken from chiavdf. We now require compressed forms to be encoded canonically when deserializing. This should prevent potential grinding attacks where some non-canonical encodings of a compressed form could be used to change its hash and thus the next challenges derived from it. Canonically encoded compressed forms must be reduced and must produce the same string when deserialized and serialized again.
• Version 1.0 of our BLS signature library is included. We brought Relic, gmp and MPIR up to their most recent releases. We again thank the Dash team for their fixes and improvements.
• We now hand build Apple Silicon native binary wheels for all chia-blockchain dependencies and host them at https://pypi.chia.net/simple. We are likely to hand build a MacOS ARM64 dmg available and certainly will for 1.0. You can install natively on M1 now with the git clone developer method today. Just make sure Python 3.9 is installed. python3 --version works.
• The GUI now shows you which network you are connected to on the Full Node page. It will also wait patiently for the green flag to drop on a network launch.
• In the GUI you can only plot k=32 or larger with the single exception of k=25 for testing. You will have to confirm choosing k=25 however. Thanks to @jespino for help on this and limiting the cli as well.
• The restore smart wallets from backup prompt has been improved to better get the intent across and that it can be skipped.
• At the top of the plotting wizard we have added text pointing out that you can plot without being in sync or on the internet.
• Wallet no longer automatically creates a new hierarchical deterministic wallet receive address on each start. You can and still should choose a new one with the NEW ADDRESS button for each new transaction for privacy.
• The network maximum k size is now set to k=50. We think that may be more storage than atoms in the solar system so it should be ok. But we will probably be hated for it in 200 years...
• The formula for computing iterations is simplified, so that only one division is necessary, and inverting the (1-x) into just x.
• There are new timestamp consensus rules. A block N must have a greater timestamp than block N-1. Also, a block's timestamp cannot be more than 5 minutes in the future. Note that we have decided that work factor difficulty resets are now going to be 24 hours on mainnet but are still shorter on testnet.
• A List[Tuple[uint16, str]] is added to the peer network handshake. These are the capabilities that the node supports, to add new features to the protocol in an easy - soft fork - manner. The message_id is now before the data in each message.
• Peer gossip limits were set.
• Generators have been re-worked in CLVM. We added a chialisp deserialization puzzle and improved the low-level generator. We reduce the accepted atom size to 1MB during ChiaLisp native deserialization.
• When processing mempool transactions, Coin IDs are now calculated from parent coin ID and amount
• We implemented rate limiting for full node. This can and will lead to short term bans of certain peers that didn't behave in expected ways. This is ok and normal, but strong defense against many DDOS attacks.
• requirements-dev.txt has been removed in favor of the CI actions and test scripts.
• We have moved to a new and much higher scalability download.chia.net to support the mainnet launch flag and additional download demand.
• To always get the latest testnet and then mainnet installers you can now use a latest URL: Windows and MacOS x86_64.
• Chia wheels not on Pypi and some dependecies not found there also are now on pypi.chia.net.
• Additional typing has been added to the Python code with thanks to @jespino.
• Cryptography and Keyring have been bumped to their current releases.
• PRs and commits to the chia-blockchain-gui repository will automatically have their locales updated.

Fixed

• The Farm page will now no longer get stuck at 50 TXCH farmed.
• chia farm has had multiple bugs and spelling issues addressed. Thanks to @alfonsoperez, @soulmerge and @olivernyc for your contributions.
• chia wallet had various bugs.
• Various weight proof improvements.
• Some users on Big Sur could not plot from the GUI as the log window would be stuck on "Loading."
• We believe we have fixed the chain stall/confused Timelord bug from ~ 13:00 UTC 3/10/21. We've added additional recovery logic as well.
• Logs from receiving a duplicate compacted Proof of Time are much more human friendly.
• We believe that the install/migrate process was bringing forward bad farming rewards receive addresses. We have attempted to stop that by only migrating RC3 and newer configurations. You can make sure you are not effected by using the Manage Farming Rewards tool mentioned above or putting a known good wallet receive address in both xch_target_address sections of config.yaml.
• Wallet cached transactions incorrectly in some cases.

1.0rc5

Added

• The RC5 release is a new breaking change/hard fork blockchain. Plots and keys from previous chains will work fine on RC5 but balances of TXCH will not come forward.
• We now support a "green flag" chain launch process. A new version of the software will poll download.chia.net/notify/ for a signed json file that will be the genesis block of the chain for that version. This will allow unattended start at mainnet.
• Bluebox Timelords are back. These are Timelords most anyone can run. They search through the historical chain and find large proofs of times and compact them down to their smallest representation. This significantly speeds up syncing for newly started nodes. Currently this is only supported on Linux and MacOS x86_64 but we will expand that. Any desktop or server of any age will be fast enough to be a useful Bluebox Timelord.
• Thanks to @jespino there is now chia farm show. You can now get almost exactly the same farming information on the CLI as the GUI.
• We have added Romanian to the GUI translations. Thank you to @bicilis on Crowdin. We also added a couple of additional target languages. Klingon anyone?
• chia wallet now takes get_address to get a new wallet receive address from the CLI.
• chia plots check will list out all the failed plot filenames at the end of the report. Thanks for the PR go to @eFishCent.
• Chialisp and the clvm have had the standard puzzle updated and we replaced ((c P A)) with (a P A).

Changed

• Testnets and mainnet now set their minimum k size and enforce it. RC5 testnet will reject plots of size less than k=32.
• Sub slots now require 16 blocks instead of 12.
• Thanks to @xdustinface of Dash, the BlS Signature library has been updated to 0.9 with clean ups and some speed ups. This changed how the G2 infinity element was handled and we now manage it inside of chia-blockchain, etc., instead of in blspy.
• We have updated the display of peer nodes and moved adding a peer to it's own pop up in the GUI.
• Block searching in the GUI has been improved.
• @jespino added i18n support and refactored how locales are loaded in the GUI. Additionally he moved more strings into the translation infrastructure for translators.
• In chiavdf we changed n-Wesolowski proofs to include B instead of y in segments. Proof segments now have the form (iters, B, proof) instead of (iters, y, proof). This reduces proof segment size from 208 to 141 bytes.
• The new chiavdf proof format is not compatible with the old one, however zero-Wesolowski proofs are not affected as they have zero proof segments and consist only of (y, proof).
• We made two HashPrime optimizations in chiavdf. This forces numbers being tested for primality to be odd and avoids an unnecessary update of the sprout vector by stopping after the first non-zero value. This is a breaking change as it changes the prime numbers generated from a given seed. We believe this is the final breaking change for chiavdf.
• chiabip158 was set to a gold 1.0 version.
• Comments to Chialisp and clvm source have been updated for all of the Chialisp changes over the proceeding three weeks.
• And thanks yet again to @jespino for a host of PRs to add more detailed typing to various components in chia-blockchain.
• aiohttp was updated to 3.7.4 to address a low severity security issue.
• calccrypto/uint128_t was updated in the Windows chiapos implementation. Chiapos required some changes its build process to support MacOS ARM64.

Fixed

• Harvester would crash if it encountered more than 16,000 plot files or 256 directories.
• Nodes that were interrupted by a network crash or standby on a laptop were not syncing upon reconnection in RC4.
• Sync issues could stop syncing from restarting and could lead to a peer host that you could not remove.
• Adding Click changed the behavior of chia keys add -m. The help now makes it clear that the 24 word mnemonic needs to be surrounded by a pair of quotes.
• Python root CA certificates have issues so we have added the Mozilla certificate store via curl.se and use that to connect to backup.chia.net via https, for example.
• The difficulty adjustment calculation was simplified.
• All of the chia sub repositories that were attempting to build MacOS Universal wheels were only generating x86_64 wheels internally. We have moved back to only generating x86_64 MacOS wheels on CI.
• However, we have updated and test compiled all Chia dependencies on Apple Silicon and will be making available a test .dmg for MacOS ARM64 shortly.
• Various weight proof edge cases have been fixed.
• Various typos and style clean ups were made to the Click CLI implementation. chia -upnp f was added to disable uPnP.
• chia plots check shouldn't crash when encountering plots that cause RuntimeError. PR again thanks to @eFishCent.
• Coloured coin announcements had a bug that would allow counterfeiting.

1.0rc4

Release Candidate 4 - 2020-02-25

Fixed

• This is a bug fix release for RC3. There was an unexpected interaction between the GUI and the Click cli tool regarding Windows that made GUI plotting not start on all GUIs.

1.0rc3 aka Release Candidate 3 - 2021-02-25

Added

• RC3 is a new chain to support the last major chialisp changes. TXCH from the RC1/2 chain do not come forward to this chain but plots and keys continue to work as usual.
• We have lowered the transaction lock to the first 5000 blocks to facilitate testing. We also started this chain at a lower difficulty.
• A new RPC api: /push_tx. Using this RPC, you can spend custom chialisp programs. You need to make a SpendBundle, which includes the puzzle reveal (chialisp), a solution (chialisp) and a signature.
• You can now use the RPC apis to query the mempool.
• There are now Swedish, Spanish, and Slovak translations. Huge thanks to @ordtrogen (Swedish), @jespino and @dvd101x (Spanish), and our own @seeden (Slovak). Also thanks were due to @f00b4r (Finnish), @A-Caccese (Italian), and @Bibop182 and @LeonidShamis (Russian). Quite a few more are almost complete and ready for inclusion. You can help translate and review translations at our crowdin project.
• You can obtain a new wallet receive address on the command line with chia wallet new_address. Thanks to @jespino for this and a lot more in the next section below.
• You will now see Your Harvester Network in the GUI even if you have no plots.

Changed

• All chialisp opcodes have been renumbered. This should be the last major breaking change for chialisp and the clvm. There are a couple minor enhancements still needed for mainnet launch, but they may or may not require minor breaking changes. We will be restarting testnet chains on a mostly weekly basis either way.
• Node batch syncing performance was increased, and it now avoids re-validating blocks that node had already validated.
• The entire CLI has been ported to Click. Huge thanks to @jespino for the big assist and @unparalleled-js for the recommendation and the initial start. This will make building out the CLI much easier. There are some subtle changes and some shortcuts are not there anymore. chia -h and chia SUBCOMMAND -h can be your guide.
• We have upgraded Electron to 11.3 to support Apple Silicon. There are still one or two issues in our build chain for Apple Silicon but we should have an M1 native build shortly.
• The websocket address is no longer displayed in the GUI unless it is running as a remote GUI. Thanks @dkackman !
• chia plots check now will continue checking after it finds an error in a plot to the total number of checks you specified.
• If you run install-gui.sh or install-timelord.sh without being in the venv, the script will warn you that you need to . ./activate and exit with error.
• If you attempt to install on a 32 bit Pi/ARM OS, the installer exits with a helpful error message. You can still fail when running under a 64 bit kernel but using a 32 bit Python 3.
• The application is now more aware of whether it is running a testnet or mainnet. This impacts wallet's display behavior and certain blockchain validation rules.
• Interface improvements for chia netspace.
• Now that aiosqlite included our upstream improvements we install version 0.17.0.
• chia init only migrates release candidate directories. The versioned sub directories under ~/chia will be going away before mainnet.

Fixed

• The GUI was often getting stuck on connecting to wallet. We beleive we have resolved this.
• We identified and fixed an issue where harvester would crash, especially when loading plots or checking a large amount of plots.
• The software now reports not synced in the GUI if not synced or being behind by 7 minutes or more.
• Difficulty was set too high for the RC1/2 chain. This lead to odd rewards behaviour as well as difficulty artificially could not fall as low as it should.
• Don't load plots that don't need to be loaded.
• We made various fixes and changes to weight proofs.
• Some configuration values were improperly ignored in migrations.
• Some debug logging was accidentally left in.
• chia configure -log-level was broken.
• We believe we finally have the Windows Installer obtaining the correct version information at build time.
• The application was sometimes not cancel pending items when closing certain websockets.
• Fixed filter hash and generator validation.
• Recursive replace was being called from the test suite.

1.0rc3

1.0rc3 aka Release Candidate 3 - 2021-02-25

Added

• RC3 is a new chain to support the last major chialisp changes. TXCH from the RC1/2 chain do not come forward to this chain but plots and keys continue to work as usual.
• We have lowered the transaction lock to the first 5000 blocks to facilitate testing. We also started this chain at a lower difficulty.
• A new RPC api: /push_tx. Using this RPC, you can spend custom chialisp programs. You need to make a SpendBundle, which includes the puzzle reveal (chialisp), a solution (chialisp) and a signature.
• You can now use the RPC apis to query the mempool.
• There are now Swedish, Spanish, and Slovak translations. Huge thanks to @ordtrogen (Swedish), @jespino and @dvd101x (Spanish), and our own @seeden (Slovak). Also thanks were due to @f00b4r (Finnish), @A-Caccese (Italian), and @Bibop182 and @LeonidShamis (Russian). Quite a few more are almost complete and ready for inclusion. You can help translate and review translations at our crowdin project.
• You can obtain a new wallet receive address on the command line with chia wallet new_address. Thanks to @jespino for this and a lot more in the next section below.
• You will now see Your Harvester Network in the GUI even if you have no plots.

Changed

• All chialisp opcodes have been renumbered. This should be the last major breaking change for chialisp and the clvm. There are a couple minor enhancements still needed for mainnet launch, but they may or may not require minor breaking changes. We will be restarting testnet chains on a mostly weekly basis either way.
• Node batch syncing performance was increased, and it now avoids re-validating blocks that node had already validated.
• The entire CLI has been ported to Click. Huge thanks to @jespino for the big assist and @unparalleled-js for the recommendation and the initial start. This will make building out the CLI much easier. There are some subtle changes and some shortcuts are not there anymore. chia -h and chia SUBCOMMAND -h can be your guide.
• We have upgraded Electron to 11.3 to support Apple Silicon. There are still one or two issues in our build chain for Apple Silicon but we should have an M1 native build shortly.
• The websocket address is no longer displayed in the GUI unless it is running as a remote GUI. Thanks @dkackman !
• chia plots check now will continue checking after it finds an error in a plot to the total number of checks you specified.
• If you run install-gui.sh or install-timelord.sh without being in the venv, the script will warn you that you need to . ./activate and exit with error.
• If you attempt to install on a 32 bit Pi/ARM OS, the installer exits with a helpful error message. You can still fail when running under a 64 bit kernel but using a 32 bit Python 3.
• The application is now more aware of whether it is running a testnet or mainnet. This impacts wallet's display behavior and certain blockchain validation rules.
• Interface improvements for chia netspace.
• Now that aiosqlite included our upstream improvements we install version 0.17.0.
• chia init only migrates release candidate directories. The versioned sub directories under ~/chia will be going away before mainnet.

Fixed

• The GUI was often getting stuck on connecting to wallet. We beleive we have resolved this.
• We identified and fixed an issue where harvester would crash, especially when loading plots or checking a large amount of plots.
• The software now reports not synced in the GUI if not synced or being behind by 7 minutes or more.
• Difficulty was set too high for the RC1/2 chain. This lead to odd rewards behaviour as well as difficulty artificially could not fall as low as it should.
• Don't load plots that don't need to be loaded.
• We made various fixes and changes to weight proofs.
• Some configuration values were improperly ignored in migrations.
• Some debug logging was accidentally left in.
• chia configure -log-level was broken.
• We believe we finally have the Windows Installer obtaining the correct version information at build time.
• The application was sometimes not cancel pending items when closing certain websockets.
• Fixed filter hash and generator validation.
• Recursive replace was being called from the test suite.

1.0rc2

1.0rc2 aka Release Candidate 2 - 2021-02-18

Fixed

• This is an errata release for Release Candidate 1. There were a couple of things that did not smoothly migrate from the Beta versions. Please make sure you also consult the release notes for RC-1 as well.
• Incorrect older spend to addresses were being migrated from Beta 27. This would send farming rewards to un-spendable coins.
• Netspace was not calculating properly in RC-1.
• The Windows installer was building with the wrong version number.
• @eFishCent didn't get correct credit in the RC 1 release notes. They have been updated to be correct.

1.0rc1

1.0rc1 aka Release Candidate 1 - 2021-02-18

Added

• This is the first release in our release candidate series. There are still a few things that will change at the edges but the blockchain, clvm, and chialisp are in release form. We have one major change to chialisp/clvm that we have chosen to schedule for the next release as in this release we're breaking the way q/quote works. We also have one more revision to the VDF that will decrease the sizes of the proofs of time. We expect a few more releases in the release candidate series.
• Installers will now be of the pattern ChiaSetup-0.2.1.exe. 0.2 is release candidate and the final .1 is the first release candidate.
• Use 'chia wallet get_transactions' in the command line to see your transactions.
• 'chia wallet show' now shows your wallet's height.
• Last Attempted Proof is now above Latest Block Challenge on the Farm page of the GUI.
• The GUI now detects duplicate plots and also only counts unique plots and unique plot size.
• We have integrated with crowdin to make it easier to translate the GUI. Check out Chia Blockchain GUI there.
• We have added Italian, Russian, and Finnish. More to come soon.
• There is now remote UI support. Documents will temporarily live in the repository but will move to the wiki shortly. Thanks to @dkackman for this excellent addition!
• Added the ability to specify an address for the pool when making plots (-c flag), as opposed to a public key. The block
  validation was changed to allow blocks like these to be made. This will enable changing pools in the future, by specifying a smart transaction for your pool rewards.
• Added chia plots check --challenge-start [start] that begins at a different [start] for -n [challenges]. Useful when you want to do more detailed checks on plots without restarting from lower challenge values you already have done. Huge thanks to @eFishCent for this and all of the debugging work behind the scenes confirming that plot failures were machine errors and not bugs!

Changed

• Sub blocks renamed to blocks, and blocks renamed to transaction blocks, everywhere. This effects the RPC, now
  all fields that referred to sub blocks are changed to blocks.
• Base difficulty and weight have increased, so difficulty of "5" in the rc1 testnet will be equivalent to "21990232555520" in the previous testnet.
• 'chia wallet send' now takes in TXCH or XCH as units instead of mojos.
• Transactions have been further sped up.
• The blockchain database has more careful validation.
• The GUI is now using bech32m.

Fixed

• We updated chiapos to hopefully address some harvester crashes when moving plot files.
• Many of the cards on the Farming page have had bugs addressed including last block farmed, block rewards, and user fees.
• Improved validation of overflow blocks.

1.0beta27

[1.0beta27] aka Beta 1.27 - 2021-02-11

Added

• The Beta 27 chain is a hard fork. All TXCH from previous releases has been reset on this chain. Your keys and plots of k=32 or larger continue to work just fine on this new chain.
• We now use the rust version of clvm, clvm_rs, in preference to validate transactions. We have additionally published binary wheels or clvm_rs for all four platforms and all three supported python versions. The rust version is approximately 50 times faster than the python version used to validate on chain transactions in previous versions.
• We have moved to compressed quadratic forms for VDFs. Using compressed representation of quadratic forms reduces their serialized size from 130 to 100 bytes (for forms with 1024-bit discriminant). This shrinks the size of VDF outputs and VDF proofs, and it's a breaking change as the compressed representation is not compatible with the older uncompressed (a, b) representation. Compressed forms are also used in calls to chiavdf and in timelord's communication with VDF clients. The form compression algorithm is based on "Trustless Groups of Unknown Order with Hyperelliptic Curves" by Samuel Dobson, Steven D. Galbraith and Benjamin Smith.
• Last Attempted Proof on the Farm tab of the GUI now shows hours:minutes:seconds instead of just hours:minutes. This makes it much easier to see that your farmer is responding to recent challenges at a glance.
• You can now send and receive transactions with the command line. Try chia wallet -h to learn more. Also, chia wallet now requires a third argument of show, therefor you will use chia wallet show to see your wallet balance.
• We have added the Crowdin translation platform to chia blockchain gui. We are still getting it fully set up, but helping to translate the GUI is going to be much easier.
• Full Node > Connections in the GUI now shows the peak sub block height your connected peers believe they are at. A node syncing from you will not be at the true peak sub block height until it gets into sync.
• chia init -c [directory] will create new TLS certificates signed by your CA located in [directory]. Use this feature to configure a new remote harvester. Type chia init -h to get instructions. Huge thanks to a very efficient @eFishCent for this quick and thorough pull request.
• We build both MacOS x86_64 and MacOS universal wheels for chiapos, chiavdf, blpsy, and chiabip158 in Python 3.9. The universal build allows M1 Macs to run these dependencies in ARM64 native mode.
• On first run in the GUI (or when there are no plot directories) there is now an "Add Plot Directories" on the Farm tab also.

Changed

• We are moving away from the terms sub blocks and blocks in our new consensus. What used to be called sub blocks will now just be blocks. Some blocks are now also transaction blocks. This is simpler both in the code and to reason about. Not all the code or UI may have caught up yet.
• This release has the final mainnet rewards schedule. During the first three years, each block winner will win 2 TXCH/XCH per block for a total of 9216 TXCH per day from 4608 challenges per day.
• Smart transactions now use an announcement instead of 'coin consumed' or lock methods.
• The GUI is now in a separate submodule repository from chia-blockchain, chia-blockchain-gui. The installers and install scripts have been updated and it continues to follow the same install steps. Note that the GUI directory will now be chia-blockchain-gui. The workflow for this may be "touch and go" for people who use the git install methods over the short term.
• Very large coin counts are now supported.
• Various RPC endpoints have been renamed to follow our switch to "just blocks" from sub blocks.
• We've made changes to the protocol handshake and the blockchain genesis process to support mainnet launch and running/farming more than one chain at a time. That also means we can't as easily determine when an old version of the peer tries to connect so we will put warnings in the logs for now.
• We no longer replace addresses in the config. IMPORTANT - This means if you change the target address in config.yml, you have to make sure you control the correct keys.
• We now only migrate Beta 19 and newer installations.
• We have removed cbor2 as a dependency.
• We updated various dependencies including cryptography, packaging, portalocker, and pyyaml - most of which are only development dependencies.

Fixed

• The function that estimated total farming space was counting space at twice the actual rate. Netspace will display half of the previous space estimate which is now a correct estimate of the actual space currently being farmed.
• We fixed many sync and stay in sync issue for both node and wallet including that both would send peaks to other peers multiple times and would validate the same transaction multiple times.
• The GUI was incorrectly reporting the time frame that the netspace estimate it displays utilizes. It is technically 312.5 minutes, on average, over the trailing 1000 sub blocks.
• Coloured coins were not working in the new consensus.
• Some Haswell processors do not have certain AVX extensions and therefore would not run.
• The cli wallet, chia wallet, was incorrectly displaying TXCH balances as if they were Coloured Coins.
• We addressed CVE-2020-28477 in the GUI.
• We made changes to CI to hopefully not repeat our skipped releases from the previous release cycle.

1.0beta26

[1.0beta26] aka Beta 1.26 - 2021-02-04

Added

• We now use our own faster primality test based on Baillie-PSW. The new primality test is based on the 2020 paper "Strengthening the Baillie-PSW primality test" by Robert Baillie, Andrew Fiori, Samuel S. Wagstaff Jr. The new test works approximately 20% faster than GMP library's mpz_probab_prime_p() function when generating random 1024-bit primes. This lowers the load on Timelords and speeds up VDF verifications in full node.
• The GUI now checks for an an already running GUI and stops the second launch. Thank you for that PR to @dkackman !
• Transactions are now validated in a separate process in full node.
• chia plots check -l will list all duplicate plot IDs found on the machine. Thanks very much for this PR @eFishCent.

Changed

• Significant improvements have been made to how the full node handles the mempool. This generally cuts CPU usage of node by 2x or more. Part of this increase is that we have temporarily limited the size of transactions. If you want to test sending a transaction you should keep the value of your transaction below 20 TXCH as new consensus will cause you to use a lot of inputs. This will be returned to the expected level as soon as the integration of clvm rust is complete.
• We have changed the way TLS between nodes and between chia services work. Each node now has two certificate authorities. One if a public, shared CA that signs the TLS certificates that every node uses to connect to other nodes on 8444 or 58444. You now also have a self generated private CA that must sign e.g. farmer and harvester's certificates. To run a remote harvester you need a new harvester key that is then signed by your private CA. We know this is not easy for remote harvester in this release but will address it quickly.
• We have changed the way we compile the proof of space plotter and added one additional optimization. On many modern processors this will mean that using the plotter with the -e flag will be 2-3% faster than the Beta 17 plotter on the same CPU. We have found this to be very sensitive to different CPUs but are now confident that, at worst, the Beta 24 plotter with -e will be the same speed as Beta 17 if not slightly faster on the same hardware.
• If a peer is not responsive during sync, node will disconnect it.
• Peers that have not sent data in the last hour are now disconnected.
• We have made the "Help Translate" button in the GUI open in your default web browser and added instructions for adding new translations and more phrases in existing translations at that URL. Try the "Help Translate" option on the language selection pull down to the left of the dark/light mode selection at the top right of the GUI.
• Sync store now tracks all connected peers and removes them as they get removed.
• The Rate Limited Wallet has been ported to new consensus and updated Chialisp methods.
• We are down to only one sub dependency that does not ship binary wheels for all four platforms. The only platform still impacted is ARM64 (generally Raspberry Pi) but that only means that you still need the minor build tools as outlined on the wiki.
• We upgraded to Electron 9.4.2 for the GUI.
• We have upgraded to py-setproctitle 1.2.2. We now have binary wheels for setproctitle on all four platforms and make it a requirement in setup.py. It is run-time optional if you wish to disable it.

Fixed

• On the Farm page of the GUI Latest Block Challenge is now populated. This shows you the actual challenge that came from the Timelord. Index is the signage point index in the current slot. There are 64 signage points every 10 minutes on average where 32 sub blocks can be won.
• Last Attempted Proof is now fixed. This will show you the last time one of your plots passed the plot filter.
• Plot filename is now back in the Plots table of the GUI.
• There was a bug in adding a sub block to weight proofs and an issue in the weight proof index.
• Over time the node would think that there were no peers attached with peak sub block heights higher than 0.
• There was a potential bug in Python 3.9.0 that required us to update blspy, chiapos, chiavdf, and chiabip158.
• An off by one issue could cause syncing to ask for 1 sub block when it should ask for e.g. 32.
• Short sync and backtrack sync both had various issues.
• There was an edge case in bip158 handling.

Known issues

• There is a remaining sync disconnect issue where your synced node will stop hearing responses from the network even though it still gets a few peaks and then stalls. Restarting node should let you quickly short sync back to the blockchain tip.
• Interaction between GitHub Actions changes we made and setuptools_scm meant we had to skip Beta 24 and Beta 25 release tags.
• On the "block" page in the full node GUI, the farmer and pool reward amounts are incorrect, the actual number is the one that is displayed, divided by 8.

1.0beta25 - Skipped

Skipped

1.0beta24 - Skipped

Skipped