Home
Welcome to the SwitchNotifier wiki!
Connect your ESP32 device to a USB port on your PC.
Download firmware.zip from https://github.com/ClassicDIY/SwitchNotifier/releases and extract the content.
go to the extracted folder and run flasher.exe.
Press the !Flash button to start the flashing process.
You may have to press the 'Boot' button on your ESP32 device to initiate the flashing process (this may not be required on some dev boards).
Press Setup WIFI and enter your wifi SSID and password
The flasher tool will launch your default browser with the SwitchNotifier home page.
Click on the "Configure page" link to setup the SwitchNotifier
*** Use the following default credentials to access the configuration page;
user: admin
password: SwitchNotifier
