Pro-mini board and DIO pins

[robshep]

Hi, I got a batch of boards made and disappointed to find that only DIO0 is brought out to a pin.

I've had to bridge over with wire to get DIO1 connected so LMIC will run.

It'd be great to see DIO1 and RESET brought out next to the D2 bridge too!

THanks

Rob

[CongducPham]

Yes, I known, I designed the board before testing LMIC. Right now I'm doing as you with a bridge wire. When I have time, will wire DIO1 and RST as well. Alternatively, use this board from a colleague of mine Fabien Ferrero: https://github.com/FabienFerrero/UCA_Board. Using 2, 7 and 9. regards,

[robshep]

Thank you. And thanks for the board.

Nevertheless
I have quite a few which I don’t need now. If you know anybody that would like one or two then get in touch to mail me a return envelope and i’ll post for free.

[CongducPham]

Well, you also try our code that does not need any DIO. And it can send LoRaWAN packet to a LoRaWAN gateway as well. regards,

[robshep]

Ok, thank you. please could you highlight this example for me Get Outlook for iOS<https://aka.ms/o0ukef>

…

________________________________ From: Congduc Pham <notifications@github.com> Sent: Wednesday, May 8, 2019 9:15 pm To: CongducPham/LowCostLoRaGw Cc: Rob Shepherd; Author Subject: Re: [CongducPham/LowCostLoRaGw] Pro-mini board and DIO pins (#248) Well, you also try our code that does not need any DIO. And it can send LoRaWAN packet to a LoRaWAN gateway as well. regards, — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#248 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AANXMU7GLIURI6Q2CS7B2YDPUMYGVANCNFSM4HLS6YQQ>.

[CongducPham]

https://github.com/CongducPham/LowCostLoRaGw/tree/master/Arduino/Arduino_LoRa_temp
and
https://github.com/CongducPham/LowCostLoRaGw/blob/master/gw_full_latest/README-aes_lorawan.md
https://github.com/CongducPham/LowCostLoRaGw/blob/master/gw_full_latest/README-TTN.md

The advantage is that low power is completly handled, which is not the case for the current LMIC.

[robshep]

Thank you. Will try this now! Get Outlook for iOS<https://aka.ms/o0ukef>

…

________________________________ From: Congduc Pham <notifications@github.com> Sent: Wednesday, May 8, 2019 9:20 pm To: CongducPham/LowCostLoRaGw Cc: Rob Shepherd; Author Subject: Re: [CongducPham/LowCostLoRaGw] Pro-mini board and DIO pins (#248) https://github.com/CongducPham/LowCostLoRaGw/tree/master/Arduino/Arduino_LoRa_temp and https://github.com/CongducPham/LowCostLoRaGw/blob/master/gw_full_latest/README-aes_lorawan.md https://github.com/CongducPham/LowCostLoRaGw/blob/master/gw_full_latest/README-TTN.md The advantage is that low power is completly handled, which is not the case for the current LMIC. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#248 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AANXMU5EO6VT24II75F66DLPUMYZ3ANCNFSM4HLS6YQQ>.

[jamesee]

Thank you. And thanks for the board.

Nevertheless
I have quite a few which I don’t need now. If you know anybody that would like one or two then get in touch to mail me a return envelope and i’ll post for free.

Hi Robshep

I am looking for the Arduino Pro Mini and RFM95W breakout board. May I have 2 of your board?

How do I mail you a return envelope? I am based in Singapore.

Regards
James

[robshep]

@jamesee DM me on twitter @95point2

[jamesee]

@jamesee DM me on twitter @95point2

Noted with thanks.

[CongducPham]

Hi, I've made upgrade to the PCB to have DIO0, DIO1, DIO2 and RST if needed.

https://github.com/CongducPham/LowCostLoRaGw#pcbs

[robshep]

Wow, this is great. Thank you @CongducPham !

[robshep]

Hi @CongducPham

Thanks for adding these pins-connections. Great. Is the PCB source available for modification. I have a colleague who can design PCBs and we might want to add a couple of sensor footprints if you can opensource the design?

[CongducPham]

Yes, I will put the .sch and .brd files as well.