Update main.yml #3

xuanhoa8687 · 2020-03-10T05:11:25Z

No description provided.

commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7494cec6cb3ba7385a6a223b81906384f15aae34 ] Calling kvm_is_visible_gfn() implies that we're parsing the memslots, and doing this without the srcu lock is frown upon: [12704.164532] ============================= [12704.164544] WARNING: suspicious RCU usage [12704.164560] 5.1.0-rc1-00008-g600025238f51-dirty CruelKernel#16 Tainted: G W [12704.164573] ----------------------------- [12704.164589] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! [12704.164602] other info that might help us debug this: [12704.164616] rcu_scheduler_active = 2, debug_locks = 1 [12704.164631] 6 locks held by qemu-system-aar/13968: [12704.164644] #0: 000000007ebdae4f (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0 [12704.164691] #1: 000000007d751022 (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0 [12704.164726] CruelKernel#2: 00000000219d2706 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164761] CruelKernel#3: 00000000a760aecd (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164794] CruelKernel#4: 000000000ef8e31d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164827] CruelKernel#5: 000000007a872093 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164861] stack backtrace: [12704.164878] CPU: 2 PID: 13968 Comm: qemu-system-aar Tainted: G W 5.1.0-rc1-00008-g600025238f51-dirty CruelKernel#16 [12704.164887] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [12704.164896] Call trace: [12704.164910] dump_backtrace+0x0/0x138 [12704.164920] show_stack+0x24/0x30 [12704.164934] dump_stack+0xbc/0x104 [12704.164946] lockdep_rcu_suspicious+0xcc/0x110 [12704.164958] gfn_to_memslot+0x174/0x190 [12704.164969] kvm_is_visible_gfn+0x28/0x70 [12704.164980] vgic_its_check_id.isra.0+0xec/0x1e8 [12704.164991] vgic_its_save_tables_v0+0x1ac/0x330 [12704.165001] vgic_its_set_attr+0x298/0x3a0 [12704.165012] kvm_device_ioctl_attr+0x9c/0xd8 [12704.165022] kvm_device_ioctl+0x8c/0xf8 [12704.165035] do_vfs_ioctl+0xc8/0x960 [12704.165045] ksys_ioctl+0x8c/0xa0 [12704.165055] __arm64_sys_ioctl+0x28/0x38 [12704.165067] el0_svc_common+0xd8/0x138 [12704.165078] el0_svc_handler+0x38/0x78 [12704.165089] el0_svc+0x8/0xc Make sure the lock is taken when doing this. Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock") Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

commit dea37a97265588da604c6ba80160a287b72c7bfd upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881f59a6b70 by task syz-executor.0/8363 CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ CruelKernel#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 usb_remove_newid_files drivers/usb/core/driver.c:212 [inline] usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005 cpia2_exit+0xa/0x16 [cpia2] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f86f3754c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000300 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86f37556bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff Allocated by task 8363: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965 0xffffffffc1b4817c do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 8363: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980 0xffffffffc1b4817c do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f59a6b40 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881f59a6b40, ffff8881f59a6c40) The buggy address belongs to the page: page:ffffea0007d66980 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc >ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc cpia2_init does not check return value of cpia2_init, if it failed in usb_register_driver, there is already cleanup using driver_unregister. No need call cpia2_usb_cleanup on module exit. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249 CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ CruelKernel#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 ? 0xffffffffc1728000 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 remove_bind_files drivers/base/bus.c:585 [inline] bus_remove_driver+0x186/0x220 drivers/base/bus.c:725 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x169/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 serial_ir_init_module+0xe8/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x14c/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc7ae000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100) The buggy address belongs to the page: page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 There are already cleanup handlings in serial_ir_init error path, no need to call serial_ir_exit do it again in serial_ir_init_module, otherwise will trigger a use-after-free issue. Fixes: fa5dc29 ("[media] lirc_serial: move out of staging and rename to serial_ir") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…cm_qla2xxx_close_session() [ Upstream commit d4023db71108375e4194e92730ba0d32d7f07813 ] This patch avoids that lockdep reports the following warning: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.1.0-rc1-dbg+ CruelKernel#11 Tainted: G W ----------------------------------------------------- rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 4 locks held by rmdir/1478: #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70 #1: 00000000c85eb147 (&default_group_class[depth - 1]CruelKernel#2/1){+.+.}, at: do_rmdir+0x217/0x2d0 CruelKernel#2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0 CruelKernel#3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx] qla2x00_do_dpc+0xcee/0xf30 [qla2xxx] kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 } ... key at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx] ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 14568 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [<ffffffff83f3d900>] __key.15805+0x0/0x40 ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe stack backtrace: CPU: 7 PID: 1478 Comm: rmdir Tainted: G W 5.1.0-rc1-dbg+ CruelKernel#11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x86/0xca check_usage.cold.59+0x473/0x563 check_prev_add.constprop.43+0x1f1/0x1170 __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ff612ba7849964b1898fd3ccd1f56941129c6aab ] We've been seeing the following sporadically throughout our fleet panic: kernel BUG at fs/btrfs/relocation.c:4584! netversion: 5.0-0 Backtrace: #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c CruelKernel#2 [ffffc90003adb988] crash_kexec at ffffffff811048ad CruelKernel#3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a CruelKernel#4 [ffffc90003adb9c0] do_trap at ffffffff81019114 CruelKernel#5 [ffffc90003adba00] do_error_trap at ffffffff810195d0 CruelKernel#6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b [exception RIP: btrfs_reloc_cow_block+692] RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246 RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690 RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0 RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000 R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0 R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 CruelKernel#7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd CruelKernel#8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3 CruelKernel#9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c The way relocation moves data extents is by creating a reloc inode and preallocating extents in this inode and then copying the data into these preallocated extents. Once we've done this for all of our extents, we'll write out these dirty pages, which marks the extent written, and goes into btrfs_reloc_cow_block(). From here we get our current reloc_control, which _should_ match the reloc_control for the current block group we're relocating. However if we get an ENOSPC in this path at some point we'll bail out, never initiating writeback on this inode. Not a huge deal, unless we happen to be doing relocation on a different block group, and this block group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in btrfs_reloc_cow_block(), because we expect to be done modifying the data inode. We are in fact done modifying the metadata for the data inode we're currently using, but not the one from the failed block group, and thus we BUG_ON(). (This happens when writeback finishes for extents from the previous group, when we are at btrfs_finish_ordered_io() which updates the data reloc tree (inode item, drops/adds extent items, etc).) Fix this by writing out the reloc data inode always, and then breaking out of the loop after that point to keep from tripping this BUG_ON() later. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ add note from Filipe ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…text commit 0c9e8b3cad654bfc499c10b652fbf8f0b890af8f upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] CruelKernel#2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] CruelKernel#3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] CruelKernel#4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ CruelKernel#40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] CruelKernel#2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] CruelKernel#3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] CruelKernel#4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ CruelKernel#40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…emove commit d27e5e07f9c49bf2a6a4ef254ce531c1b4fb5a38 upstream. With this early return due to zfcp_unit child(ren), we don't use the zfcp_port reference from the earlier zfcp_get_port_by_wwpn() anymore and need to put it. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: d99b601 ("[SCSI] zfcp: restore refcount check on port_remove") Cc: <stable@vger.kernel.org> CruelKernel#3.7+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 198790d9a3aeaef5792d33a560020861126edc22 ] In free_percpu() we sometimes call pcpu_schedule_balance_work() to queue a work item (which does a wakeup) while holding pcpu_lock. This creates an unnecessary lock dependency between pcpu_lock and the scheduler's pi_lock. There are other places where we call pcpu_schedule_balance_work() without hold pcpu_lock, and this case doesn't need to be different. Moving the call outside the lock prevents the following lockdep splat when running tools/testing/selftests/bpf/{test_maps,test_progs} in sequence with lockdep enabled: ====================================================== WARNING: possible circular locking dependency detected 5.1.0-dbg-DEV #1 Not tainted ------------------------------------------------------ kworker/23:255/18872 is trying to acquire lock: 000000000bc79290 (&(&pool->lock)->rlock){-.-.}, at: __queue_work+0xb2/0x520 but task is already holding lock: 00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> CruelKernel#4 (pcpu_lock){..-.}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 pcpu_alloc+0xfa/0x780 __alloc_percpu_gfp+0x12/0x20 alloc_htab_elem+0x184/0x2b0 __htab_percpu_map_update_elem+0x252/0x290 bpf_percpu_hash_update+0x7c/0x130 __do_sys_bpf+0x1912/0x1be0 __x64_sys_bpf+0x1a/0x20 do_syscall_64+0x59/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> CruelKernel#3 (&htab->buckets[i].lock){....}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 htab_map_update_elem+0x1af/0x3a0 -> CruelKernel#2 (&rq->lock){-.-.}: lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 task_fork_fair+0x37/0x160 sched_fork+0x211/0x310 copy_process.part.43+0x7b1/0x2160 _do_fork+0xda/0x6b0 kernel_thread+0x29/0x30 rest_init+0x22/0x260 arch_call_rest_init+0xe/0x10 start_kernel+0x4fd/0x520 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x6f/0x72 secondary_startup_64+0xa4/0xb0 -> #1 (&p->pi_lock){-.-.}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 try_to_wake_up+0x41/0x600 wake_up_process+0x15/0x20 create_worker+0x16b/0x1e0 workqueue_init+0x279/0x2ee kernel_init_freeable+0xf7/0x288 kernel_init+0xf/0x180 ret_from_fork+0x24/0x30 -> #0 (&(&pool->lock)->rlock){-.-.}: __lock_acquire+0x101f/0x12a0 lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 __queue_work+0xb2/0x520 queue_work_on+0x38/0x80 free_percpu+0x221/0x260 pcpu_freelist_destroy+0x11/0x20 stack_map_free+0x2a/0x40 bpf_map_free_deferred+0x3c/0x50 process_one_work+0x1f7/0x580 worker_thread+0x54/0x410 kthread+0x10f/0x150 ret_from_fork+0x24/0x30 other info that might help us debug this: Chain exists of: &(&pool->lock)->rlock --> &htab->buckets[i].lock --> pcpu_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcpu_lock); lock(&htab->buckets[i].lock); lock(pcpu_lock); lock(&(&pool->lock)->rlock); *** DEADLOCK *** 3 locks held by kworker/23:255/18872: #0: 00000000b36a6e16 ((wq_completion)events){+.+.}, at: process_one_work+0x17a/0x580 #1: 00000000dfd966f0 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x17a/0x580 CruelKernel#2: 00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260 stack backtrace: CPU: 23 PID: 18872 Comm: kworker/23:255 Not tainted 5.1.0-dbg-DEV #1 Hardware name: ... Workqueue: events bpf_map_free_deferred Call Trace: dump_stack+0x67/0x95 print_circular_bug.isra.38+0x1c6/0x220 check_prev_add.constprop.50+0x9f6/0xd20 __lock_acquire+0x101f/0x12a0 lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 __queue_work+0xb2/0x520 queue_work_on+0x38/0x80 free_percpu+0x221/0x260 pcpu_freelist_destroy+0x11/0x20 stack_map_free+0x2a/0x40 bpf_map_free_deferred+0x3c/0x50 process_one_work+0x1f7/0x580 worker_thread+0x54/0x410 kthread+0x10f/0x150 ret_from_fork+0x24/0x30 Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 41be3e2618174fdf3361e49e64f2bf530f40c6b0 ] vfio_dev_present() which is the condition to wait_event_interruptible_timeout(), will call vfio_group_get_device and try to acquire the mutex group->device_lock. wait_event_interruptible_timeout() will set the state of the current task to TASK_INTERRUPTIBLE, before doing the condition check. This means that we will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: [ 4050.264464] ------------[ cut here ]------------ [ 4050.264508] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b33c00e2>] prepare_to_wait_event+0x14a/0x188 [ 4050.264529] WARNING: CPU: 12 PID: 35924 at kernel/sched/core.c:6112 __might_sleep+0x76/0x90 .... 4050.264756] Call Trace: [ 4050.264765] ([<000000000017bbaa>] __might_sleep+0x72/0x90) [ 4050.264774] [<0000000000b97edc>] __mutex_lock+0x44/0x8c0 [ 4050.264782] [<0000000000b9878a>] mutex_lock_nested+0x32/0x40 [ 4050.264793] [<000003ff800d7abe>] vfio_group_get_device+0x36/0xa8 [vfio] [ 4050.264803] [<000003ff800d87c0>] vfio_del_group_dev+0x238/0x378 [vfio] [ 4050.264813] [<000003ff8015f67c>] mdev_remove+0x3c/0x68 [mdev] [ 4050.264825] [<00000000008e01b0>] device_release_driver_internal+0x168/0x268 [ 4050.264834] [<00000000008de692>] bus_remove_device+0x162/0x190 [ 4050.264843] [<00000000008daf42>] device_del+0x1e2/0x368 [ 4050.264851] [<00000000008db12c>] device_unregister+0x64/0x88 [ 4050.264862] [<000003ff8015ed84>] mdev_device_remove+0xec/0x130 [mdev] [ 4050.264872] [<000003ff8015f074>] remove_store+0x6c/0xa8 [mdev] [ 4050.264881] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8 [ 4050.264890] [<00000000003c1530>] __vfs_write+0x38/0x1a8 [ 4050.264899] [<00000000003c187c>] vfs_write+0xb4/0x198 [ 4050.264908] [<00000000003c1af2>] ksys_write+0x5a/0xb0 [ 4050.264916] [<0000000000b9e270>] system_call+0xdc/0x2d8 [ 4050.264925] 4 locks held by sh/35924: [ 4050.264933] #0: 000000001ef90325 (sb_writers#4){.+.+}, at: vfs_write+0x9e/0x198 [ 4050.264948] #1: 000000005c1ab0b3 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cc/0x1f8 [ 4050.264963] CruelKernel#2: 0000000034831ab8 (kn->count#297){++++}, at: kernfs_remove_self+0x12e/0x150 [ 4050.264979] CruelKernel#3: 00000000e152484f (&dev->mutex){....}, at: device_release_driver_internal+0x5c/0x268 [ 4050.264993] Last Breaking-Event-Address: [ 4050.265002] [<000000000017bbaa>] __might_sleep+0x72/0x90 [ 4050.265010] irq event stamp: 7039 [ 4050.265020] hardirqs last enabled at (7047): [<00000000001cee7a>] console_unlock+0x6d2/0x740 [ 4050.265029] hardirqs last disabled at (7054): [<00000000001ce87e>] console_unlock+0xd6/0x740 [ 4050.265040] softirqs last enabled at (6416): [<0000000000b8fe26>] __udelay+0xb6/0x100 [ 4050.265049] softirqs last disabled at (6415): [<0000000000b8fe06>] __udelay+0x96/0x100 [ 4050.265057] ---[ end trace d04a07d39d99a9f9 ]--- Let's fix this as described in the article https://lwn.net/Articles/628628/. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> [remove now redundant vfio_dev_present()] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 347ab9480313737c0f1aaa08e8f2e1a791235535 ] This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 CruelKernel#7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] CruelKernel#2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] CruelKernel#3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 CruelKernel#7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424 ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdd ("pwm: Add sysfs interface") Fixes: 0733424 ("pwm: Unexport children before chip removal") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a58f2cef26e1ca44182c8b22f4f4395e702a5795 upstream. There was the below bug report from Wu Fangsuo. On the CMA allocation path, isolate_migratepages_range() could isolate unevictable LRU pages and reclaim_clean_page_from_list() can try to reclaim them if they are clean file-backed pages. page:ffffffbf02f33b40 count:86 mapcount:84 mapping:ffffffc08fa7a810 index:0x24 flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked) raw: 000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053 raw: ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80 page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page)) page->mem_cgroup:ffffffc09bf3ee80 ------------[ cut here ]------------ kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 CruelKernel#3 Hardware name: ASR AQUILAC EVB (DT) task: ffffffc00a54cd00 task.stack: ffffffc009b00000 PC is at shrink_page_list+0x1998/0x3240 LR is at shrink_page_list+0x1998/0x3240 pc : [<ffffff90083a2158>] lr : [<ffffff90083a2158>] pstate: 60400045 sp : ffffffc009b05940 .. shrink_page_list+0x1998/0x3240 reclaim_clean_pages_from_list+0x3c0/0x4f0 alloc_contig_range+0x3bc/0x650 cma_alloc+0x214/0x668 ion_cma_allocate+0x98/0x1d8 ion_alloc+0x200/0x7e0 ion_ioctl+0x18c/0x378 do_vfs_ioctl+0x17c/0x1780 SyS_ioctl+0xac/0xc0 Wu found it's due to commit ad6b670 ("mm: remove SWAP_MLOCK in ttu"). Before that, unevictable pages go to cull_mlocked so that we can't reach the VM_BUG_ON_PAGE line. To fix the issue, this patch filters out unevictable LRU pages from the reclaim_clean_pages_from_list in CMA. Link: http://lkml.kernel.org/r/20190524071114.74202-1-minchan@kernel.org Fixes: ad6b670 ("mm: remove SWAP_MLOCK in ttu") Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Wu Fangsuo <fangsuowu@asrmicro.com> Debugged-by: Wu Fangsuo <fangsuowu@asrmicro.com> Tested-by: Wu Fangsuo <fangsuowu@asrmicro.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Pankaj Suryawanshi <pankaj.suryawanshi@einfochips.com> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 CruelKernel#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update main.yml

f11c5b7

evdenis closed this Mar 11, 2020

xuanhoa8687 deleted the patch-4 branch September 12, 2020 05:42

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update main.yml #3

Update main.yml #3

xuanhoa8687 commented Mar 10, 2020

Update main.yml #3

Update main.yml #3

Conversation

xuanhoa8687 commented Mar 10, 2020