sync bleeding-edge #113
Merged
sync bleeding-edge #113
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Use two different files for the Octopus Pro and Octopus (non-Pro). The configs are the same in practice, but the difference in version and naming can lead to confusion. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Make sure the stepper enable_pin comment shows an inverted pin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Try to make it more clear that Discord is not Discourse, as the two similarly sounding services are often confused by users unfamiliar with them. The Klipper Discourse and Klipper Discord are available for many topics related to Klipper - reword some sections to make their use more open. Avoid referring to the Klipper github repo in this Contact document as we no longer use Klipper github issues at all. Remove the table of contents as it is largely redundant for the document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
…og file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add RP2040 internal temperature sensor Signed-off-by: Wayne Manion <treowayne@gmail.com>
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
Note additional features that have been added recently. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
New configuration for the Sovol SV06 Plus Initial pass at adding a printer configuration for the Sovol SV06 Plus based on the existing Sovol SV06 config. Updated for the larger build volume, added filament runout sensor, and removed any references to the LCD screen since the stock screen doesn't work with Klipper. Signed-off-by: Herb McNew <herb.mcnew@gmail.com>
In testing with a user on Discord we discovered the sensorless homing thresholds were out of line with what Sovol ships with Marlin. This aligns with their settings. Signed-off-by: Herb McNew <herb.mcnew@gmail.com>
Replace deprecated logger.warn with logger.warning logger.warn will be removed in Python 3.13 Signed-off-by: Thijs Triemstra <info@collab.nl>
…e space Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The output_pin module is only capable of updating an output pin at most once every 100ms. Add a new pwm_tool module that is capable of queuing updates in the micro-controller and thus allowing for much higher update rates. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Joshua Schlicker <potter-91@web.de>
Extends the BMxx80 category with support for the older BMP180 sensor, providing temperature and humidity output. Signed-off-by: VAXXi Popescu <github@vaxxi.net>
It seems python3.12 has removed support for readfp() - use read_file() instead. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
It's possible to build and configure tmc5160 drivers with external mosfets that support more than 3 amps. The actual maximum for tmc5160 drivers is dependent on how the board is wired and the mosfets used. Increase the error check to 10 amps. This error checking is primarily intended to catch "obvious misconfigurations" (eg, specifying milli-amps instead of amps), and the new value of 10 amps should suffice for this task. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
gcmd.respond_error() has been deprecated: 6152454 Signed-off-by: Andrei Ignat <andrei@ignat.se>
The set_register() code may block, and it therefore may be possible that the loop in _init_registers() could occur in parallel with other updates. That could result in a "OrderedDict mutated during iteration" error. Avoid the error by querying the latest value during each iteration of the loop. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Andrei Kozhevnikov <coderusinbox@gmail.com>
omit rpi device version nrs rpi2 or newer Signed-off-by: Thijs Triemstra <info@collab.nl>
Note that the max_accel parameter is the actual acceleration used in most movements. Note that the accel/velocity limits can be changed using the SET_VELOCITY_LIMIT command. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Define hard_pwm pins for STM32F070 and STM32F072, and update KConfig accordingly. Signed-off-by: Will Puckett <willpuckett@gmail.com>
Temporarily disable the closing of PRs marked as "reviewer needed". Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Stefan Dej <meteyou@gmail.com>
This printer is advertised as having a `220*220*250mm build volume`. Signed-off-by: Bassam Husain <bassamanator.2cj4t@simplelogin.com>
Signed-off-by: Bassam Husain <bassamanator.2cj4t@simplelogin.com>
These internal low-level config parameters were never documented. Going forward, developers may modify them by altering the internal settings in toolhead.py. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Clarify the internal naming to make a more clear distinction between "stalling" (input not coming fast enough) and "pausing" (the need to hold up reading of input to avoid buffering too far into the future). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Simplify the code by introducing a separate lookahead priming flush timer. After this change, the flush_timer is not active in any of the special queuing states. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Rename last_kin_move_time to need_flush_time and rename force_flush_time to last_flush_time to improve variable name clarity. Move low-level flushing to new _advance_flush_time() so that it is possible to flush the queues without needing to advance print_time. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Track a "NeedPrime" queue state instead of the "Flushed" state, and continue running the background flushing timer as long as there may be data in any of the move queues. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Call toolhead.note_kinematic_activity() on each pin update to ensure that those updates will be flushed properly. This fixes "Timer too close" errors on SET_PIN commands that are issued when the toolhead is idle. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
Signed-off-by: Levi Szabo <iamrazorshark@gmail.com>
…ush_time Introduce a new step_gen_time variable for flush_step_generation(). This allows need_flush_time to be set to future times without interfering with flush_step_generation(). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Support notification callbacks each time the mcu move queue is flushed. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Implement the maximum_mcu_duration config parameter along with its associated queue flushing. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add support for maximum filament diameter to hall filament width sensor. If the diameter of the filament diameter is larger than the limit, the virtual runout sensor will trigger. The default value is set to maximum flow adjustment threshold to prevent oversized filament from clogging. Signed-off-by: Sami Haahtinen <ressu@ressukka.net>
References to pins.error are not valid as the pins module is not imported. Reported by @Piezoid. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
bwnance
approved these changes
Dec 21, 2023
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
do not press the rebase button :D