-
Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.
-
Keyboard Maintainer: TweetyDaBird
-
Hardware Supported: Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible
-
Hardware Availability: Lectronz Store
-
Hardware Design: GitHub
This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader.
- promicro - This uses the default Caterina bootloader.
- elite_c - This uses the Atmel-DFU bootloader.
- nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro).
Make example for this keyboard (after setting up your build environment):
make tweetydabird/lotus58/promicro:default
Flashing example for this keyboard:
make tweetydabird/lotus58/elite_c:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top outer key for each hand as it is plugged in
- Physical reset: Briefly short the marked pads on PCB
- Keycode in layout: Press the key mapped to
QK_BOOTif mapped (not in default keymap)