Makefile.inc1

#
# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
#
# Build-time options are documented in make.conf(5).
#
# The intended user-driven targets are:
#
# buildworld  - rebuild *everything*, including glue to help do upgrades
# quickworld  - skip the glue and do a depend+build on the meat
# realquickworld - skip the glue and depend stages and just build the meat
# crossworld  - only build the glue (particularly the cross-build environment)
# installworld- install everything built by "buildworld"
# most        - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk.  These include:
#		obj depend all install clean cleandepend cleanobj

# Put initial settings here.
SUBDIR=

# We must do share/info early so that installation of info `dir'
# entries works correctly.  Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(${.CURDIR}/share/info)
SUBDIR+= share/info
.endif

# We must do include and lib early so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(${.CURDIR}/include)
SUBDIR+= include
.endif
.if exists(${.CURDIR}/lib)
SUBDIR+= lib
.endif
# This exists simply to ensure that the obj dir hierarchy is
# intact for nrelease, allowing the nrelease Makefile's to 
# reference ${.OBJDIR}.
#
.if exists(${.CURDIR}/nrelease)
SUBDIR+= nrelease
.endif

.if exists(${.CURDIR}/bin)
SUBDIR+= bin
.endif
.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
SUBDIR+= games
.endif
.if exists(${.CURDIR}/gnu)
SUBDIR+= gnu
.endif
.if exists(${.CURDIR}/libexec)
SUBDIR+= libexec
.endif
.if exists(${.CURDIR}/sbin)
SUBDIR+= sbin
.endif
.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
SUBDIR+= secure
.endif
.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
SUBDIR+= share
.endif
.if exists(${.CURDIR}/sys)
SUBDIR+= sys
.endif
.if exists(${.CURDIR}/usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(${.CURDIR}/usr.sbin)
SUBDIR+= usr.sbin
.endif

.if exists(${.CURDIR}/etc)
SUBDIR+= etc
.endif

# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif

.if defined(SUBDIR_OVERRIDE)
SUBDIR=		${SUBDIR_OVERRIDE}
.endif

.if defined(NOCLEANDIR)
CLEANDIR=	clean cleandepend
.else
CLEANDIR=	cleandir
.endif

.if defined(NO_CLEAN)
NOCLEAN=	# defined
.endif

# Object directory base in primary make.  Note that when we rerun make
# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
# subdirectory because the rest of the build system needs it that way.
# The original object directory base is saved in OBJTREE.
#
MAKEOBJDIRPREFIX?=	/usr/obj
OBJTREE?=		${MAKEOBJDIRPREFIX}

# Used for stage installs and pathing
#
DESTDIRBASE?=		${OBJTREE}${.CURDIR}

# Remove DESTDIR from MAKEFLAGS.  It is present in the environment
# anyhow, and we need to be able to override it for stage installs
.MAKEFLAGS:=	${.MAKEFLAGS:NDESTDIR=*}

# This section sets the tools used to build the world/kernel
WORLD_CCVER?=		gcc44
WORLD_LDVER?=		ld.bfd
WORLD_BINUTILSVER?=	binutils222

# temporary until everybody has converted to x86_64
.if ${MACHINE_ARCH} == "amd64"
MACHINE_ARCH=	x86_64
.makeenv MACHINE_ARCH
.endif

TARGET_ARCH?=	${MACHINE_ARCH}
.if ${TARGET_ARCH} == ${MACHINE_ARCH}
TARGET?=	${MACHINE}
.else
TARGET?=	${TARGET_ARCH}
.endif
.if make(buildworld)
BUILD_ARCH!=	sysctl -n hw.machine_arch

# temporary until everybody has converted to x86_64
.if ${BUILD_ARCH} == "amd64"
BUILD_ARCH=	x86_64
.endif

.if ${MACHINE_ARCH} != ${BUILD_ARCH}
.error To cross-build, set TARGET_ARCH.
.endif
.endif

# Backwards compatibility with older make's or older sys.mk's.  make
# is expected to define MACHINE_PLATFORM.
#
.if !defined(MACHINE_PLATFORM)
MACHINE_PLATFORM= pc32
.endif

# XXX this is ugly and we need to come up with a nicer solution
.if !defined(TARGET_PLATFORM)
.if ${TARGET_ARCH} == "i386"
TARGET_PLATFORM= pc32
.elif ${TARGET_ARCH} == "x86_64"
TARGET_PLATFORM= pc64
.else
.error Unknown target architecture.
.endif
.endif

THREAD_LIB?=	thread_xu
.if ${THREAD_LIB} == "c_r"
.if defined(NO_LIBC_R)
.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
.endif
.endif

# BTOOLS	(Natively built) All non-cross-development tools that the
#		main build needs.  This includes things like 'mkdir' and 'rm'.
#		We will not use the native system's exec path once we start
#		on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
#
# CTOOLS	(Natively built) Cross development tools which are specific
#		to the target architecture.
#
# WORLD		(Cross built) Our ultimate buildworld, using only BTOOLS and
#		CTOOLS.
#
# MACHINE_PLATFORM Platform Architecture we are building on
# MACHINE	Machine Architecture (usually the same as MACHINE_ARCH)
# MACHINE_ARCH	Cpu Architecture we are building on
#
# TARGET_PLATFORM Platform Architecture we are building for
# TARGET	Machine Architecture we are building for
# TARGET_ARCH	Cpu Architecture we are building for
#
BTOOLSDEST=	${DESTDIRBASE}/btools_${MACHINE_ARCH}
CTOOLSDEST=	${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
WORLDDEST=	${DESTDIRBASE}/world_${TARGET_ARCH}

# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
# cross-tools stages to augment the existing command path to access newer
# versions of certain utilities such as 'patch' that the cross-tools stage
# might expect.
#
BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games

# The strict temporary command path contains all binaries required
# by the buildworld system after the cross-tools stage.
#
STRICTTMPPATH=	${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin

TMPDIR?=	/tmp
TMPPID!=	echo $$$$

#
# Building a world goes through the following stages
#
# 1. bootstrap-tool stage [BMAKE]
#	This stage is responsible for creating programs that
#	are needed for backward compatibility reasons. They
#	are not built as cross-tools.
# 2. build-tool stage [TMAKE]
#	This stage is responsible for creating the object
#	tree and building any tools that are needed during
#	the build process.
# 3. cross-tool stage [XMAKE]
#	This stage is responsible for creating any tools that
#	are needed for cross-builds. A cross-compiler is one
#	of them.
# 4. world stage [WMAKE]
#	This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
#	This stage installs a previously built world.
#

# bootstrap-tool stage
#
BMAKEENV=	MAKEOBJDIRPREFIX=${BTOOLSDEST} \
		OBJTREE=${OBJTREE} \
		DESTDIR=${BTOOLSDEST} \
		PATH=${BTOOLSPATH}:${PATH} \
		INSTALL="sh ${.CURDIR}/tools/install.sh"

BMAKE=		${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
		-DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
		-DNO_WERROR -DNO_NLS

# build-tool stage
#
TMAKEENV=	MAKEOBJDIRPREFIX=${BTOOLSDEST} \
		OBJTREE=${OBJTREE} \
		DESTDIR= \
		PATH=${BTOOLSPATH}:${PATH} \
		INSTALL="sh ${.CURDIR}/tools/install.sh"

TMAKE=		${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
		-DNO_FORTRAN -DNOSHARED

# cross-tool stage
#
# note: TOOLS_PREFIX points to the obj root holding the cross
#	compiler binaries, while USRDATA_PREFIX points to the obj root 
#	holding the target environment (and also determines where cross-built
#	libraries, crt*.o, and include files are installed).
#
XMAKEENV=	MAKEOBJDIRPREFIX=${CTOOLSDEST} \
		OBJTREE=${OBJTREE} \
		DESTDIR=${CTOOLSDEST} \
		INSTALL="sh ${.CURDIR}/tools/install.sh" \
		TOOLS_PREFIX=${CTOOLSDEST} \
		USRDATA_PREFIX=${WORLDDEST} \
		PATH=${BTOOLSPATH}:${PATH}

XMAKE=		${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
		-DBOOTSTRAPPING -DNOSHARED

# world stage, note the strict path and note that TOOLS_PREFIX is left
# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
# for both binary and library paths, even though it is being compiled to
# WORLDDEST.  None of the programs in the world stage are ever actually
# executed during the buildworld/installworld.
#
CROSSENV=	MAKEOBJDIRPREFIX=${WORLDDEST} \
		OBJTREE=${OBJTREE} \
		MACHINE_ARCH=${TARGET_ARCH} \
		MACHINE=${TARGET} \
		MACHINE_PLATFORM=${TARGET_PLATFORM} \
		OBJFORMAT_PATH=${CTOOLSDEST} \
		HOST_CCVER=${HOST_CCVER} \
		CCVER=${WORLD_CCVER} \
		LDVER=${WORLD_LDVER} \
		BINUTILSVER=${WORLD_BINUTILSVER}

WMAKEENV=	${CROSSENV} \
		DESTDIR=${WORLDDEST} \
		INSTALL="sh ${.CURDIR}/tools/install.sh" \
		PATH=${STRICTTMPPATH}

WMAKE=		${WMAKEENV} ${MAKE} -f Makefile.inc1

# install stage
#
IMAKEENV=	${CROSSENV} \
		PATH=${STRICTTMPPATH}
IMAKE=		${IMAKEENV} ${MAKE} -f Makefile.inc1

# kernel stage
#
KMAKEENV=	${WMAKEENV}

# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
_worldtmp: _cleantmp _mtreetmp
.ORDER: _cleantmp _mtreetmp

_cleantmp:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> Rebuilding the temporary build tree"
	@echo "--------------------------------------------------------------"
.if !defined(NOCLEAN)
	rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
.else
	# XXX - These two can depend on any header file.
	rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
	rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
.endif

_mtreetmp:
	mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist	\
		-p ${_dir}/  > /dev/null
	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist		\
		-p ${_dir}/usr > /dev/null
.endfor
	mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist	\
		-p ${WORLDDEST}/usr/include > /dev/null
	${LN} -sf ${.CURDIR}/sys ${WORLDDEST}

_bootstrap-tools:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 1: bootstrap tools"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${BMAKE} bootstrap-tools
_cleanobj:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 2a: cleaning up the object tree"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
_obj:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 2b: rebuilding the object tree"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} par-obj
_build-tools:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 2c: build tools"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${TMAKE} build-tools
_cross-tools:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 3: cross tools"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${XMAKE} cross-tools
_includes:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
_libraries:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 4b: building libraries"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
_depend:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 4c: make dependencies"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} par-depend
everything:
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> stage 4d: building everything.."
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${WMAKE} all

# note: buildworld no longer depends on _cleanobj because we rm -rf the
# entire object tree and built the bootstrap tools in a different location.
#
# buildworld	- build everything from scratch
# quickworld	- skip the bootstrap, build, and cross-build steps
# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
#
# note: we include _obj in realquickworld to prevent accidental creation
# of files in /usr/src.

WMAKE_TGTS=
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+=	_worldtmp _bootstrap-tools
.endif
WMAKE_TGTS+=	_obj _build-tools
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+=	_cross-tools
.endif
WMAKE_TGTS+=	_includes _libraries _depend everything

buildworld: ${WMAKE_TGTS}

quickworld: _mtreetmp _obj _includes _libraries _depend everything

realquickworld: _mtreetmp _obj _includes _libraries everything

crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools

.ORDER: ${WMAKE_TGTS}
.ORDER: _obj _includes
.ORDER: _mtreetmp _obj

#
# installcheck
#
# Checks to be sure system is ready for installworld
#
installcheck:
.if !defined(NO_SENDMAIL)
	@pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
	@pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
.endif
	@pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
	@pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
	@pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
	@case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
.endif
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
installworld: installcheck
	cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
	${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/

#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
	@echo "--------------------------------------------------------------"
	@echo ">>> Making hierarchy"
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
	@echo
	@echo "--------------------------------------------------------------"
	@echo ">>> Installing everything.."
	@echo "--------------------------------------------------------------"
	cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install

#
# buildkernel, nativekernel, quickkernel, and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending TARGET) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# You can specify INSTALLSTRIPPED=1 if you wish the installed 
# kernel and modules to be stripped of its debug info (required
# symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
# if you only want to strip the modules of their debug info.  These
# only apply if you have DEBUG=-g in your kernel config or make line.
#
# Note that we have to use TARGET instead of TARGET_ARCH when
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
# be set to cross-build, we have to make sure TARGET is set
# properly.

.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF=	${KERNEL}
KERNWARN=	yes
.else
# XXX makeshift fix to build the right kernel for the (target) architecture
# We should configure this in the platform files somehow
.if ${TARGET_ARCH} == "i386"
KERNCONF?=	GENERIC
.else
KERNCONF?=	X86_64_GENERIC
.endif
.endif
INSTKERNNAME?=	kernel

KRNLSRCDIR=	${.CURDIR}/sys
KRNLCONFDIR=	${KRNLSRCDIR}/config
KRNLOBJDIR=	${OBJTREE}${KRNLSRCDIR}
KERNCONFDIR?=	${KRNLCONFDIR}

BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KERNCONFDIR}/${_kernel})
BUILDKERNELS+=	${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor

# kernel version numbers survive rm -rf
#
.for _kernel in ${BUILDKERNELS}
.if exists(${KRNLOBJDIR}/${_kernel}/version)
KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
.endif
.endfor

#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
bk_tools:
	@if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
	    echo "You must buildworld before buildkernel.  If you wish"; \
	    echo "to build a kernel using native tools, config it manually"; \
	    echo "or use the nativekernel target if you are in a rush"; \
	    exit 1; \
	fi

maybe_bk_tools:
.for _kernel in ${BUILDKERNELS}
	@if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
	    if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
		echo "The kernel was build using buildworld tools which no" ; \
		echo "longer appear to exist, quickkernel failed!" ; \
		exit 1; \
	    fi; \
	fi
.endfor

bk_build_list:
.if empty(BUILDKERNELS)
	@echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
	@echo ">>> Did you move your kernel configs from i386/conf to config/?"
	@false
.endif

bk_kernwarn:
.if defined(KERNWARN)
	@echo "--------------------------------------------------------------"
	@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
	@echo "--------------------------------------------------------------"
	@sleep 3
.endif
	@echo

# The buildkernel target rebuilds the specified kernels from scratch
# using the crossbuild tools generated by the last buildworld.  It is
# the safest (but also the most time consuming) way to build a new kernel.
#
buildkernel:	bk_tools bk_build_list bk_kernwarn
.for _kernel in ${BUILDKERNELS}
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
	@echo "===> ${_kernel}"
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
	rm -rf ${KRNLOBJDIR}/${_kernel}
.else
	@if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
		echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
		rm -rf ${KRNLOBJDIR}/${_kernel}; fi
.endif
	mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
	cd ${KRNLCONFDIR}; \
		PATH=${STRICTTMPPATH} \
		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
			${KERNCONFDIR}/${_kernel}
.endif
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
	echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
.endif
	touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
.if !defined(NO_KERNELDEPEND)
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
.endif
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
.endfor

# The nativekernel target rebuilds the specified kernels from scratch
# using the system's standard compiler rather than using the crossbuild
# tools generated by the last buildworld.  This is fairly safe if your
# system is reasonable up-to-date.
#
nativekernel:	bk_build_list bk_kernwarn
.for _kernel in ${BUILDKERNELS}
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
	@echo "===> ${_kernel}"
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
	rm -rf ${KRNLOBJDIR}/${_kernel}
.else
	@if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
		echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
		rm -rf ${KRNLOBJDIR}/${_kernel}; fi
.endif
	mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
	cd ${KRNLCONFDIR}; \
		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
			${KERNCONFDIR}/${_kernel}
.endif
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
	echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
.endif
	touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
	cd ${KRNLOBJDIR}/${_kernel}; \
	    MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
	    ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
.if !defined(NO_KERNELDEPEND)
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${MAKE} KERNEL=${INSTKERNNAME} depend
.endif
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${MAKE} KERNEL=${INSTKERNNAME} all
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
.endfor

# The quickkernel target rebuilds the specified kernels as quickly
# as possible.  It will use the native tools or the buildworld cross tools
# based on whether the kernel was originally generated via buildkernel or
# nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
# nor is the make depend step run.
#
quickkernel:	maybe_bk_tools bk_build_list bk_kernwarn
.for _kernel in ${BUILDKERNELS}
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
	@echo "===> ${_kernel}"
.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
.if !defined(NO_KERNELCONFIG)
	cd ${KRNLCONFDIR}; \
		PATH=${STRICTTMPPATH} \
		    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
			${KERNCONFDIR}/${_kernel}
.endif
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
.else
.if !defined(NO_KERNELCONFIG)
	cd ${KRNLCONFDIR}; \
	    config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
		${KERNCONFDIR}/${_kernel}
.endif
	cd ${KRNLOBJDIR}/${_kernel}; \
	    ${MAKE} KERNEL=${INSTKERNNAME} all
.endif
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
.endfor


# installkernel
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel reinstallkernel:
	@echo "--------------------------------------------------------------"
	@echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
	@echo "--------------------------------------------------------------"
.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
	    ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
.else
	cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
	    ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
.endif

#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
	@echo "--------------------------------------------------------------"
	@echo ">>> Building programs only"
	@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ all
.endfor

#
# installmost
#
# Install the binaries built by the 'most' target.  This does not include
# libraries or include files.
#
installmost:
	@echo "--------------------------------------------------------------"
	@echo ">>> Installing programs only"
	@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
	cd ${.CURDIR}/${_dir};		${MAKE} DIRPRFX=${_dir}/ install
.endfor

#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets.  If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build.  Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it.  If in doubt, 'make world' again.
#

# bootstrap-tools: Build all tools required to build all tools.  Note that
# order is important in a number of cases and also note that the bootstrap
# and build tools stages have access to earlier binaries they themselves
# had generated.
#
# patch:	older patch's do not have -i.  This program must be built
#		first so other bootstrap tools that need to apply patches
#		can use it.
# [x]install:	dependancies on various new install features
# rpcgen:	old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
#		envs are not compatible with older objformat binaries.
#
.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
_strfile=	games/fortune/strfile
.endif

BSTRAPDIRS= ${_strfile} \
	usr.bin/patch \
	bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
	bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
	bin/hostname bin/kill \
	usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
	usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
	usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
	usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
	usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
	usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
	usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
	usr.bin/cap_mkdb usr.bin/true usr.bin/false \
	usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
	usr.bin/tail usr.bin/unifdef usr.bin/tic \
	usr.sbin/chown usr.sbin/mtree usr.sbin/config \
	usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
	gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
	usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb

bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets
	touch ${BTOOLSDEST}/.bootstrap_done

bootstrap-tools-before:
	${LN} -fs /bin/date ${BTOOLSDEST}/bin/date

bootstrap-tools-targets: ${BSTRAPDIRS:S/^/bstrap-/}

.ORDER: bootstrap-tools-before bootstrap-tools-targets

.for _tool in ${BSTRAPDIRS}
bstrap-${_tool}!
	${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
		cd ${.CURDIR}/${_tool}; \
		${MAKE} DIRPRFX=${_tool}/ obj; \
		${MAKE} DIRPRFX=${_tool}/ depend; \
		${MAKE} DIRPRFX=${_tool}/ all; \
		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
.endfor

# build-tools: Build special purpose build tools.
#
# XXX we may be able to remove or consolidate this into bootstrap-tools
# now that we have the native helper (.nx/.no) infrastructure.
#
.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
_share=	share/syscons/scrnmaps
.endif

_gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
_gcc44_cross= gnu/usr.bin/cc44
_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
.if !defined(NO_GCC47)
_gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
.endif
_custom_cross= libexec/customcc
_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}

BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}

build-tools: build-tools-targets
	touch ${BTOOLSDEST}/.build_done

build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}

.ORDER: ${_gcc44_tools:S/^/btools-/}
.ORDER: ${_gcc47_tools:S/^/btools-/}

.for _tool in ${BTOOLSDIRS}
btools-${_tool}!
	${ECHODIR} "===> ${_tool} (build-tools)"; \
		cd ${.CURDIR}/${_tool}; \
		${MAKE} DIRPRFX=${_tool}/ obj; \
		${MAKE} DIRPRFX=${_tool}/ depend; \
		${MAKE} DIRPRFX=${_tool}/ all; \
		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
.endfor

#
# cross-tools: Build cross-building tools
#
.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
_btxld=	usr.sbin/btxld
.endif

CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat ${_gcc_common_cross} \
		${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}

cross-tools: cross-tools-targets
	touch ${CTOOLSDEST}/.cross_done

cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}

.for _tool in ${CTOOLSDIRS}
ctools-${_tool}!
	${ECHODIR} "===> ${_tool} (cross-tools)"; \
		cd ${.CURDIR}/${_tool}; \
		${MAKE} DIRPRFX=${_tool}/ obj; \
		${MAKE} DIRPRFX=${_tool}/ depend; \
		${MAKE} DIRPRFX=${_tool}/ all; \
		${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
.endfor

#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
	cd ${.CURDIR}/etc;		${MAKE} distrib-dirs

#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The list of libraries with dependents (${_prebuild_libs}) and their
# interdependencies (__L) are built automatically by the
# ${.CURDIR}/tools/make_libdeps.sh script.
#
# .makeenv does not work when bootstrapping from 4.x, so we must be sure
# to specify the correct CCVER or 'cc' will not exec the correct compiler.
#
libraries:
.if !defined(NO_GCC47)
	cd ${.CURDIR}; \
	    HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
		${MAKE} -f Makefile.inc1 _startup_libs47;
.endif
	cd ${.CURDIR}; \
	    HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
		${MAKE} -f Makefile.inc1 _startup_libs44;
	cd ${.CURDIR}; \
	    ${MAKE} -f Makefile.inc1 _startup_libs; \
	    ${MAKE} -f Makefile.inc1 _prebuild_libs; \
	    ${MAKE} -f Makefile.inc1 _generic_libs;
	touch ${WORLDDEST}/.libraries_done

# These dependencies are not automatically generated:
#
# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
# shared libraries for ELF.  The target for _startup_libsXX is
# specifically built using gccXX.
#
_startup_libs47=	gnu/lib/gcc47/csu \
			gnu/lib/gcc47/libgcc \
			gnu/lib/gcc47/libgcc_eh \
			gnu/lib/gcc47/libgcc_pic
_startup_libs44=	gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
_startup_libs=		lib/csu lib/libc lib/libc_rtld

_prebuild_libs=		lib/libbz2 lib/liblzma lib/libz
_prebuild_libs+=	lib/libutil

_generic_libs=	gnu/lib

_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
		lib/libncurses/libncurses lib/libopie lib/libradius \
		lib/libsbuf lib/libtacplus lib/libm \
		lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
		lib/libpthread lib/libprop lib/libdevattr

lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L

_generic_libs+=	lib

.if !defined(NO_CRYPT)
.if !defined(NO_OPENSSL)
_prebuild_libs+=	secure/lib/libcrypto secure/lib/libssl
.if !defined(NO_OPENSSH)
_prebuild_libs+=	secure/lib/libssh
secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
.endif
.endif
_generic_libs+=	secure/lib
.endif

_generic_libs+=	usr.bin/lex/lib

.for _lib in ${_startup_libs44} ${_startup_libs47} \
		${_startup_libs} ${_prebuild_libs} ${_generic_libs}
${_lib}__L: .PHONY
.if exists(${.CURDIR}/${_lib})
	${ECHODIR} "===> ${_lib}"; \
		cd ${.CURDIR}/${_lib}; \
		${MAKE} DIRPRFX=${_lib}/ depend; \
		${MAKE} DIRPRFX=${_lib}/ all; \
		${MAKE} DIRPRFX=${_lib}/ install
.endif
.endfor

_startup_libs: ${_startup_libs:S/$/__L/}
_startup_libs47: ${_startup_libs47:S/$/__L/}
_startup_libs44: ${_startup_libs44:S/$/__L/}
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
_generic_libs: ${_generic_libs:S/$/__L/}

# library targets must be ordered because there are inter-library
# races (e.g. generation of tconfig.h)
#
.ORDER: ${_startup_libs47:S/$/__L/}
.ORDER: ${_startup_libs44:S/$/__L/}
.ORDER: ${_startup_libs:S/$/__L/}
.ORDER: ${_prebuild_libs:S/$/__L/}
.ORDER: ${_generic_libs:S/$/__L/}

.for __target in clean cleandepend cleandir obj depend includes
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
	@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
		${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
		edir=${entry}.${MACHINE_ARCH}; \
		cd ${.CURDIR}/$${edir}; \
	else \
		${ECHODIR} "===> ${DIRPRFX}${entry}"; \
		edir=${entry}; \
		cd ${.CURDIR}/$${edir}; \
	fi; \
	${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.ORDER: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes

# The wmake target is used by /usr/bin/wmake to run make in a
# world build environment.
#
wmake:
	@echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'

wmakeenv:
	@echo '${WMAKEENV} /bin/sh'

bmake:
	@echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'

bmakeenv:
	@echo '${BMAKEENV} /bin/sh'

tmake:
	@echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'

tmakeenv:
	@echo '${TMAKEENV} /bin/sh'

xmake:
	@echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'

xmakeenv:
	@echo '${XMAKEENV} /bin/sh'

.include <bsd.subdir.mk>