-
Notifications
You must be signed in to change notification settings - Fork 0
Python script to restore a schedule to the Evohome controller via serial device
License
Evsdd/Evohome_Schedule_Restore
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Evohome Schedule Restore v0.3 Copyright (c) 2019 Evsdd Python 3.7 Requires pyserial module which can be installed using 'python -m pip install pyserial' Prototype program to restore schedules to the Evotouch controller INSTRUCTIONS FOR USE: To begin using the script, first edit user configuration setup section. Choose your restore file name and location which contains the schedule information (see Evohome_Schedule_Backup output for file structure information), configure your serial port which is connected to the HGI80 (or equivalent) and finally enter your controller ID. You are now ready to run the script! Note: the Evohome controller allows a maximum of 42 setpoints per zone. If this limit is exceeded the controller will reject the schedule for the particular zone, leaving the existing schedule effective.
About
Python script to restore a schedule to the Evohome controller via serial device
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published