Kicad files
OpenHPSDR RX and TX rear panel crowbar (coax input and output)
Please do NOT use this repository. Master is the main development trunk and, for this reason, is in a perpetual unstable state. Use the last branch instead
For more informations, please refer to
https://wiki.electrolab.fr/Projets:Lab:2017:Peripheriques_Angelia
This board could be cut in half and shielded
Input are fully compatible with Alexiares/Alexandrie output
TX antenna relays are rated at 150 W PEP (300 W maximum)
It also could work with DC2PD I2C interface and it's forked version AlexI2C
3D image of the board are stored on this repo
RX_Ant dwn.jpg
RX_Ant_up.jpg
Bom is available in CSV format
Schematics, pcb design, modules and libs are in Kicad format
Gerber files are fully compatible with Protel 4.6 format
Board's dimensions are oversized to fit the 5x10 and 10x10cm
size of all board of the Hermes project under Kicad:
- Alexandrie (Ἀλεξάνδρεια), Alexiares SPI interface
- Alexi2C ( Ἄλεξις), Alternate Alexiares I2C interface
- Alexiares_lpf (Ἀλεξιάρης) Alexiares low pass filter
- Alexiares_hpf (Ἀλεξιάρης) Alexiares high-pass filter
- Alexiares_Coax_Out (Ἀλεξιάρης ) Alexiares antenna switch boards
- Télémaque (Τηλέμαχος), SSPA U/V/C°/Refl/FWD sensor for the Mentor board
- Mentor (Μέντωρ) Micro-controler unit(MCU) and security module controling Telemaque informations
- Ulysse ou Odysseus (Ὀδυσσεύς), medium power reflectometer for the Telemaque/Mentor set
- Themis (Θέμις), low power bidirectionnal reflectometer with pre-distorsion (pure signal) output
- Aiôn (αἰών), 10 MHz low drift, low phase noise clock (general purpose)
- Hébé (Ἥβη), EER control system for high efficiency power amp