BeanTable Bundles

JMRI · May 30, 2019 · 6b741a3 · 6b741a3
1 parent 1a55d02
commit 6b741a3
Show file tree

Hide file tree

Showing 8 changed files with 17 additions and 169 deletions.
diff --git a/java/src/jmri/jmrit/beantable/BeanTableBundle.properties b/java/src/jmri/jmrit/beantable/BeanTableBundle.properties
@@ -111,47 +111,6 @@ HardwareAddressToolTip               = Enter an integer as the hardware address
 SysNameToolTip                       = <html>Enter System Name for this new item, e.g. X{0}12<br>where X = the prefix for your connection<br>and {0} = is the letter for the item type.</html>
 AddEntryToolTipLine1                 = For {0} {1} use one of these patterns:
 
-# the following block can be deleted when added to lightmanager
-# Output connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Turnout). {0} = turnouts
-AddOutputEntryToolTipC/MRI           = 3 (Node 0, Output 3)<br>\
-4003 (Node 4, Output 3)<br>\
-4:3 (Node 4, Output 3)<br>\
-4B3	(Node 4, Output 3)<br>\
-Max. value for Output: 999
-AddOutputEntryToolTipMERG           = 18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 18 (event 18 On; 18 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Max. value for Output Event: 99999
-AddOutputEntryToolTipXpressNet       = 3 (Turnout 3) between 1 and 1024
-AddOutputEntryToolTipNCE             = 16 (Output (Turnout) 16)
-AddOutputEntryToolTipDCC++           = 12 (ID in internal DCC++ table)
-AddOutputEntryToolTipX10             = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
-# the following block can be deleted when added to sensormanager
-# Input connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Sensor).
-AddInputEntryToolTipC/MRI            = 1003 (Node 1, Input 3)<br>\
-Max. value for Input: 999
-AddInputEntryToolTipMERG             = Soon: 18 (event 18 On; 18 Off)<br>\
-18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Advanced users:<br>\
-X910012;X910019 (hex CAN frame msg. Active; Inactive)<br>\
-Soon: 200018M07 (listen to Events 18 .. 1F)<br>\
-Max. value for Input Event: 99999
-AddInputEntryToolTipXpressNet        = 3 (Feedback module 1, input 3)<br>\
-99:3 (Feedback module 99, input 3)
-AddInputEntryToolTipNCE              = 4:3 (AIU Cab 4, pin 3)<br>\
-50	(AIU Cab 4, pin 3)
-AddInputEntryToolTipDCC++            = 12 (ID in internal DCC++ table)<br>\
-4:3	(converts to number 50)
-AddInputEntryToolTipX10              = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
 # leave 1 space at the end of the following values to display nicely in Border
 LabelTurnoutNumber                   = Turnout 1 
 LabelSecondNumber                    = Turnout 2 

diff --git a/java/src/jmri/jmrit/beantable/BeanTableBundle_ca.properties b/java/src/jmri/jmrit/beantable/BeanTableBundle_ca.properties
@@ -113,48 +113,6 @@ HardwareAddressToolTip = Proporciona un enter per a l'adre\u00e7a hardware per a
 SysNameToolTip = <html>Proporciona un Nom del Sistema per aquest nou element, e.g. X{0}12<br>on X = es el prefix de la teva connexi\u00f3<br>i {0} = \u00e9s la lletra per al element.</html>
 AddEntryToolTipLine1 = Per {0} {1} utilitzeu un d'aquests patrons:
 
-# the following block can be deleted when added to lightmanager
-# Output connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Turnout). {0} = turnouts
-AddOutputEntryToolTipC/MRI = 3 (Node 0, Output 3)<br>\
-4003 (Node 4, Output 3)<br>\
-4:3 (Node 4, Output 3)<br>\
-4B3	(Node 4, Output 3)<br>\
-Max. value for Output: 999
-AddOutputEntryToolTipMERG  = 
-18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 18 (event 18 On; 18 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Max. value for Output Event: 99999
-AddOutputEntryToolTipXpressNet = 3 (Turnout 3) between 1 and 1024
-AddOutputEntryToolTipNCE = 16 (Output (Turnout) 16)
-AddOutputEntryToolTipDCC++ = 12 (ID in internal DCC++ table)
-AddOutputEntryToolTipX10 = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
-# the following block can be deleted when added to sensormanager
-# Input connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Sensor).
-AddInputEntryToolTipC/MRI = 1003 (Node 1, Input 3)<br>\
-Max. value for Input: 999
-AddInputEntryToolTipMERG = Soon: 18 (event 18 On; 18 Off)<br>\
-18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Advanced users:<br>\
-X910012;X910019 (hex CAN frame msg. Active; Inactive)<br>\
-Soon: 200018M07 (listen to Events 18 .. 1F)<br>\
-Max. value for Input Event: 99999
-AddInputEntryToolTipXpressNet = 3 (Feedback module 1, input 3)<br>\
-99:3 (Feedback module 99, input 3)
-AddInputEntryToolTipNCE = 4:3 (AIU Cab 4, pin 3)<br>\
-50	(AIU Cab 4, pin 3)
-AddInputEntryToolTipDCC++ = 12 (ID in internal DCC++ table)<br>\
-4:3	(converts to number 50)
-AddInputEntryToolTipX10 = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
 # leave 1 space at the end of the following values to display nicely in Border
 LabelTurnoutNumber = N\u00famero d'Agulla:
 LabelSecondNumber = Segona agulla:

diff --git a/java/src/jmri/jmrit/beantable/BeanTableBundle_cs.properties b/java/src/jmri/jmrit/beantable/BeanTableBundle_cs.properties
@@ -530,47 +530,6 @@ WarningInvalidRange=Neplatn\u00e9 zad\u00e1n\u00ed pro vytvo\u0159en\u00ed v\u00
 
 SysNameToolTip= <html>Zadejte syst\u00e9mov\u00fd n\u00e1zev pro tuto novou polo\u017eku, nap\u0159. X{0}12<br>kde X = p\u0159edpona pro va\u0161e p\u0159ipojen\u00ed<br>a {0} = je p\u00edsmeno pro typ polo\u017eky.</html>
 AddEntryToolTipLine1=Pro {0} {1} pou\u017eijte jeden z t\u011bchto vzor\u016f:
-# the following block can be deleted when added to lightmanager
-# Output connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Turnout). {0} = turnouts
-AddOutputEntryToolTipC/MRI = 3 (Uzel 0, V\u00fdstup 3)<br>\
-4003 (Uzel 4, V\u00fdstup 3)<br>\
-4:3 (Uzel 4, V\u00fdstup 3)<br>\
-4B3	(Uzel 4, V\u00fdstup 3)<br>\
-Max. hodnota pro v\u00fdstup: 999
-AddOutputEntryToolTipMERG =
-18;21 (ud\u00e1lost 18 Zap; ud\u00e1lost 21 Zap)<br>\
-+18;-21 (ud\u00e1lost 18 Zap; ud\u00e1lost 21 Vyp)<br>\
-Brzy: 18 (ud\u00e1lost 18 Zap; 18 Vyp)<br>\
-Brzy: 2000018 (Uzel 2 Ud\u00e1lost 18; Zap Ud\u00e1lost = Aktivn\u00ed; Vyp Ud\u00e1lost = Neaktivn\u00ed)<br>\
-Brzy: N2E18 (Uzel 2 Ud\u00e1lost 18; Zap Ud\u00e1lost = Aktivn\u00ed; Vyp Ud\u00e1lost = Neaktivn\u00ed)<br>\
-Max. hodnota pro ud\u00e1lost v\u00fdstupu: 99999
-AddOutputEntryToolTipXpressNet = 3 (V\u00fdhybka 3) mezi 1 a 1024
-AddOutputEntryToolTipNCE = 16 (V\u00fdstup (V\u00e1hybka) 16)
-AddOutputEntryToolTipDCC++ = 12 (ID v intern\u00ed tabulce DCC++)
-AddOutputEntryToolTipX10 = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
-# the following block can be deleted when added to sensormanager
-# Input connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Sensor).
-AddInputEntryToolTipC/MRI = 1003 (Uzel 1, Vstup 3)<br>\
-Max. hodnota pro vstup: 999
-AddInputEntryToolTipMERG = Brzy: 18 (ud\u00e1lost 18 Zap; 18 Vyp)<br>\
-18;21 (ud\u00e1lost 18 Zap; ud\u00e1lost 21 Zap)<br>\
-+18;-21 (ud\u00e1lost 18 Zap; ud\u00e1lost 21 Vyp)<br>\
-Brzy: 2000018 (Uzel 2 Ud\u00e1lost 18; Zap Ud\u00e1lost = Aktivn\u00ed; Vyp Ud\u00e1lost = Neaktivn\u00ed)<br>\
-Brzy: N2E18 (Uzel 2 Ud\u00e1lost 18; Zap Ud\u00e1lost = Aktivn\u00ed; Vyp Ud\u00e1lost = Neaktivn\u00ed)<br>\
-Pokro\u010dil\u00ed u\u017eivatel\u00e9:<br>\
-X910012;X910019 (hex CAN frame msg. Active; Inactive)<br>\
-Brzy: 200018M07 (poslouchej ud\u00e1losti 18 .. 1F)<br>\
-Max. hodnota pro vstupn\u00ed ud\u00e1lost: 99999
-AddInputEntryToolTipXpressNet = 3 (Zp\u011btn\u00fd ohlas modul 1, vstup 3)<br>\
-99:3 (Zp\u011btn\u00fd ohlas modul 99, vstup 3)
-AddInputEntryToolTipNCE = 4:3 (AIU Cab 4, pin 3)<br>\
-50	(AIU Cab 4, pin 3)
-AddInputEntryToolTipDCC++ = 12 (ID v intern\u00ed tabulce DCC++)<br>\
-4:3	(p\u0159evede na \u010d\u00edslo 50)
-AddInputEntryToolTipX10 = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
 
 LightScheduleHintMinutes=Zadej minuty
 

diff --git a/java/src/jmri/jmrit/beantable/BeanTableBundle_da.properties b/java/src/jmri/jmrit/beantable/BeanTableBundle_da.properties
@@ -113,47 +113,6 @@ HardwareAddressToolTip               = Indtast et heltal som hardwareadresse for
 SysNameToolTip                       = <html>Enter System Name for this new item, e.g. X{0}12<br>where X = the prefix for your connection<br>and {0} = is the letter for the item type.</html>
 AddEntryToolTipLine1                 = For {0} {1} brug en af disse:
 
-# the following block can be deleted when added to lightmanager
-# Output connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Turnout). {0} = turnouts
-AddOutputEntryToolTipC/MRI           = 3 (Node 0, Output 3)<br>\
-4003 (Node 4, Output 3)<br>\
-4:3 (Node 4, Output 3)<br>\
-4B3	(Node 4, Output 3)<br>\
-Max. value for Output: 999
-AddOutputEntryToolTipMERG            =18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 18 (event 18 On; 18 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Max. value for Output Event: 99999
-AddOutputEntryToolTipXpressNet       = 3 (Turnout 3) between 1 and 1024
-AddOutputEntryToolTipNCE             = 16 (Output (Turnout) 16)
-AddOutputEntryToolTipDCC++           = 12 (ID in internal DCC++ table)
-AddOutputEntryToolTipX10             = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
-# the following block can be deleted when added to sensormanager
-# Input connection specific patterns for system name entry in jmri.jmrit.beantable.AddNewHardwareDevicePanel (eg. Add Sensor).
-AddInputEntryToolTipC/MRI            = 1003 (Node 1, Input 3)<br>\
-Max. value for Input: 999
-AddInputEntryToolTipMERG             = Soon: 18 (event 18 On; 18 Off)<br>\
-18;21 (event 18 On; event 21 On)<br>\
-+18;-21 (event 18 On; event 21 Off)<br>\
-Soon: 2000018 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Soon: N2E18 (Node 2 Event 18; On Event = Active; Off Event = Inactive)<br>\
-Advanced users:<br>\
-X910012;X910019 (hex CAN frame msg. Active; Inactive)<br>\
-Soon: 200018M07 (listen to Events 18 .. 1F)<br>\
-Max. value for Input Event: 99999
-AddInputEntryToolTipXpressNet        = 3 (Feedback module 1, input 3)<br>\
-99:3 (Feedback module 99, input 3)
-AddInputEntryToolTipNCE              = 4:3 (AIU Cab 4, pin 3)<br>\
-50	(AIU Cab 4, pin 3)
-AddInputEntryToolTipDCC++            = 12 (ID in internal DCC++ table)<br>\
-4:3	(converts to number 50)
-AddInputEntryToolTipX10              = A3 (House code A + device code)<br>\
-01.2A.B4 (Insteon label 01.2A.B4)
-
 # leave 1 space at the end of the following values to display nicely in Border
 LabelTurnoutNumber                   = Sporskifte 1 
 LabelSecondNumber                    = Sporskifte 2 

diff --git a/java/src/jmri/jmrix/cmri/CmriBundle_cs.properties b/java/src/jmri/jmrix/cmri/CmriBundle_cs.properties
@@ -7,4 +7,13 @@ MenuCMRI                    = C/MRI
 
 MenuItemCommandMonitor      = C/MRI monitor
 MenuItemDiagnostics         = Spustit diagnostiku
-MenuItemAssignments = Seznam p\u0159i\u0159azen\u00ed
+MenuItemAssignments = Seznam p\u0159i\u0159azen\u00ed
+
+AddOutputEntryToolTip = 3 (Uzel 0, V\u00fdstup 3)<br>\
+4003 (Uzel 4, V\u00fdstup 3)<br>\
+4:3 (Uzel 4, V\u00fdstup 3)<br>\
+4B3	(Uzel 4, V\u00fdstup 3)<br>\
+Max. hodnota pro v\u00fdstup: 999
+
+AddInputEntryToolTip = 1003 (Uzel 1, Vstup 3)<br>\
+Max. hodnota pro vstup: 999
diff --git a/java/src/jmri/jmrix/cmri/CmriBundle_de.properties b/java/src/jmri/jmrix/cmri/CmriBundle_de.properties
@@ -27,7 +27,7 @@ SerialCommandMonTitle       = Serieller C/MRI Kommunikationsmonitor
 DiagnosticTitle             = C/MRI Diagnostikprobe
 
 # CmriTurnout/Light (Add to table pane) items
-AddOutputEntryToolTipC/MRI = 3 (Knoten 0, Ausgang 3)<br>\
+AddOutputEntryToolTip = 3 (Knoten 0, Ausgang 3)<br>\
 4003 (Knoten 4, Ausgang 3)<br>\
 4:3 (Knoten 4, Ausgang 3)<br>\
 4B3	(Knoten 4, Ausgang 3)<br>\

diff --git a/java/src/jmri/jmrix/nce/NceBundle_cs.properties b/java/src/jmri/jmrix/nce/NceBundle_cs.properties
@@ -16,3 +16,5 @@ LogNceClockRatioRangeError = NCE hodiny pom\u011br je mimo meze:
 LogNceClockStopCmdError = NCE p\u0159\u00edkaz hodiny stop odpov\u011bd\u011bl:
 LogNceClockStartCmdError = NCE p\u0159\u00edkaz hodiny start odpov\u011bd\u011bl:
 LogAlarmTimeIntervalError = resetuji pollingInterval, neplatn\u00e1 hodnota: 
+
+AddOutputEntryToolTip = 16 (V\u00fdstup (V\u00e1hybka) 16)
diff --git a/java/src/jmri/jmrix/powerline/PowerlineBundle.properties b/java/src/jmri/jmrix/powerline/PowerlineBundle.properties
@@ -17,6 +17,8 @@ DefaultTag                  = Powerline_
 
 # PowerlineTurnout/Light/Sensor (Add to table pane) items
 AddOutputEntryToolTip = A3 (Output House code A + device 3)<br>\
-House code: A-P, device 1-16 (inclusive).
+House code: A-P, device 1-16 (inclusive).<br>\
+01.2A.B4 (Insteon label 01.2A.B4)
 AddInputEntryToolTip = A3 (Output House code A + device 3)<br>\
-House code: A-P, device 1-16 (inclusive).
+House code: A-P, device 1-16 (inclusive).<br>\
+01.2A.B4 (Insteon label 01.2A.B4)