Skip to content

Commit

Permalink
Fix URL references for screenshots
Browse files Browse the repository at this point in the history
  • Loading branch information
@millerdl
millerdl committed Nov 14, 2020
1 parent 19b1fbe commit 8aab6ba
Showing 1 changed file with 33 additions and 33 deletions.
66 changes: 33 additions & 33 deletions help/en/html/hardware/loconet/LocoIO.shtml
View file
Original file line number Diff line number Diff line change
Expand Up @@ -100,35 +100,35 @@
<li>Looking at your hardware, select the correct PIC programmer firmware version from the list. It often is
labeled on the biggest IC chip. If your version is not in the list, select the first higher one. In this
example we pick "LocoIO v1.53":<br>
<a href="images/LocoIODefinition/Create1_New.png"><img
src="images/LocoIODefinition/Create1_New.png"
<a href="images/LocoIoDefinition/Create1_New.png"><img
src="images/LocoIoDefinition/Create1_New.png"
width="370" height="235" alt="Screenshot LocoIO Config step 1"></a>
</li>
<li>On the right of the Create New Loco pane, enter a name for this module, eg. "LocoIO 81/1 rev 1.53", and
fix the ultra-long decoder DCC address suggested. We chose 81, the factory default board address:<br>
<a href="images/LocoIODefinition/Create2_Correct.png"><img
src="images/LocoIODefinition/Create2_Correct.png"
<a href="images/LocoIoDefinition/Create2_Correct.png"><img
src="images/LocoIoDefinition/Create2_Correct.png"
width="370" height="235" alt="Screenshot LocoIO Config step 2"></a><br>
Click [Save] and close the Create New Loco pane.</li>

<li>You will see the new entry appear in the Roster.<br>
Select it, make sure to select Programming on Main, and click [Program]:<br>
<a href="images/LocoIODefinition/Create3_POM.png"><img
src="images/LocoIODefinition/Create3_POM.png"
<a href="images/LocoIoDefinition/Create3_POM.png"><img
src="images/LocoIoDefinition/Create3_POM.png"
width="294" height="230" alt="Screenshot LocoIO Config step 3"></a>
</li>

<li>On the Basic tab, enter the actual LocoIO Main Address and Sub-address, "81" and "1" respectively in our
example:<br>
<a href="images/LocoIODefinition/Create4_CheckAddress.png"><img
src="images/LocoIODefinition/Create4_CheckAddress.png"
<a href="images/LocoIoDefinition/Create4_CheckAddress.png"><img
src="images/LocoIoDefinition/Create4_CheckAddress.png"
width="343" height="261" alt="Screenshot LocoIO Config step 4"></a>
</li>

<li>Next, go to the Roster Entry pane, click [Save to Roster] and close &amp; reopen the LocoIO
definition from the Roster to update the actual decoder address:<br>
<a href="images/LocoIODefinition/Create5_SaveClose.png"><img
src="images/LocoIODefinition/Create5_SaveClose.png"
<a href="images/LocoIoDefinition/Create5_SaveClose.png"><img
src="images/LocoIoDefinition/Create5_SaveClose.png"
width="343" height="261" alt="Screenshot LocoIO Config step 5"></a>
</li>

Expand All @@ -143,76 +143,76 @@
</li>

<li><br>
<a href="images/LocoIODefinition/Create6_Locotab.png"><img
src="images/LocoIODefinition/Create6_Locotab.png"
<a href="images/LocoIoDefinition/Create6_Locotab.png"><img
src="images/LocoIoDefinition/Create6_Locotab.png"
width="343" height="262" alt="Screenshot LocoIO Config step 6"></a>
</li>

<li><br>
<a href="images/LocoIODefinition/Create7_LocotabRead.png"><img
src="images/LocoIODefinition/Create7_LocotabRead.png"
<a href="images/LocoIoDefinition/Create7_LocotabRead.png"><img
src="images/LocoIoDefinition/Create7_LocotabRead.png"
width="343" height="262" alt="Screenshot LocoIO Config step 7"></a>
</li>

<li><br>
<a href="images/LocoIODefinition/Create8a_InitialPortstab.png"><img
src="images/LocoIODefinition/Create8a_InitialPortstab.png"
<a href="images/LocoIoDefinition/Create8a_InitialPortstab.png"><img
src="images/LocoIoDefinition/Create8a_InitialPortstab.png"
width="579" height="199" alt="Screenshot LocoIO Config step 8a"></a>
</li>

<li><br>
<a href="images/LocoIODefinition/Create8b_After1stReadAll.png"><img
src="images/LocoIODefinition/Create8b_After1stReadAll.png"
<a href="images/LocoIoDefinition/Create8b_After1stReadAll.png"><img
src="images/LocoIoDefinition/Create8b_After1stReadAll.png"
width="592" height="442" alt="Screenshot LocoIO Config step 8b"></a>
</li>

<li>After Read All, many ports will show a Mode selected. Due to the complexity of the LocoIO memory
DecoderPro can't figure out some choices, so you will have to assist at this point for those ports that still
show "Port not in Use". At least you will notice the numbers already changed.
For example on Port 4 the number in the Config field reads "95":<br>
<a href="images/LocoIODefinition/Create9a_Port4Combo.png"><img
src="images/LocoIODefinition/Create9a_Port4Combo.png"
<a href="images/LocoIoDefinition/Create9a_Port4Combo.png"><img
src="images/LocoIoDefinition/Create9a_Port4Combo.png"
width="405" height="130" alt="Screenshot LocoIO Config step 9a"></a>
</li>

<li>Turn to the Cheat Sheet tab reference, in the Config column look up "95". It's is a Block Detector -
Active High:<br>
<a href="images/LocoIODefinition/Create9b_CheatSheet.png"><img
src="images/LocoIODefinition/Create9b_CheatSheet.png"
<a href="images/LocoIoDefinition/Create9b_CheatSheet.png"><img
src="images/LocoIoDefinition/Create9b_CheatSheet.png"
width="274" height="195" alt="Screenshot LocoIO Config step 9b"></a>
</li>

<li>Return to the Ports tab and in the Port 4 Mode combo, pick "Block Detector - Active High" (either odd or even
address, will correct automatically later on):<br>
<a href="images/LocoIODefinition/Create9c_Port4ComboOpen.png"><img
src="images/LocoIODefinition/Create9c_Port4ComboOpen.png"
<a href="images/LocoIoDefinition/Create9c_Port4ComboOpen.png"><img
src="images/LocoIoDefinition/Create9c_Port4ComboOpen.png"
width="425" height="130" alt="Screenshot LocoIO Config step 9c"></a>
</li>

<li>After clicking [Read changes on sheet]:<br>
<a href="images/LocoIODefinition/Create9d_Port4ModeSet.png"><img
src="images/LocoIODefinition/Create9d_Port4ModeSet.png"
<a href="images/LocoIoDefinition/Create9d_Port4ModeSet.png"><img
src="images/LocoIoDefinition/Create9d_Port4ModeSet.png"
width="427" height="126" alt="Screenshot LocoIO Config step 9d"></a>
</li>

<li>After fixing all mode combo's that are not "0", once again click [Read full sheet] to update all fields
and inspect the LocoIO configuration. Scroll down to see more ports:<br>
<a href="images/LocoIODefinition/Create10_Ready.png"><img
src="images/LocoIODefinition/Create10_Ready.png"
<a href="images/LocoIoDefinition/Create10_Ready.png"><img
src="images/LocoIoDefinition/Create10_Ready.png"
width="564" height="442" alt="Screenshot LocoIO Config step 10"></a>
</li>

<li>Inputs allow setting up to two more actions carried out when the pin goes to ON. You can set the action
type and the address on the right hand side of the LocoIO programmer pane as shown here. See the HDL
documentation for examples and further information:<br>
<a href="images/LocoIODefinition/Create11_Opcode.png"><img
src="images/LocoIODefinition/Create11_Opcode.png"
<a href="images/LocoIoDefinition/Create11_Opcode.png"><img
src="images/LocoIoDefinition/Create11_Opcode.png"
width="275" height="116" alt="Screenshot LocoIO Opcode Config"></a>
</li>

<li>A LocoBooster module will show several special options:<br>
<a href="images/LocoIODefinition/Create12_Lbooster.png"><img
src="images/LocoIODefinition/Create12_Lbooster.png"
<a href="images/LocoIoDefinition/Create12_Lbooster.png"><img
src="images/LocoIoDefinition/Create12_Lbooster.png"
width="400" height="541" alt="Screenshot LocoBooster Config pane"></a>
</li>

Expand All @@ -228,7 +228,7 @@

<a name="second" id="second"></a>
<h2>LocoIO Programmer 2 <strong>(no longer supported)</strong></h2>
<a href="images/LocoIo_v2.png"><img src="images/LocoIo_v2.png"
<a href="images/LocoIO_v2.png"><img src="images/LocoIO_v2.png"
width="397" height="305" alt="Screenshot of LocoIO Configuration Tool
v2 (deprecated)"></a>
<p><em>The following entry is only shown as reference for JMRI
Expand Down

0 comments on commit 8aab6ba

Please sign in to comment.