Skip to content

OhEzTouch is a simple always-on touch control device for home automation systems driven by OpenHAB.

License

Notifications You must be signed in to change notification settings

JensHoRi/oh-ez-touch

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

77 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

OhEzTouch

Introduction

arduitouch_main

OhEzTouch is a simple always-on touch control device for home automation systems driven by OpenHAB.

The touch buttons and graphics are dynamically generated. The structure is defined by an individual OpenHAB sitemap on the server side.

Partlist

(optional)

Installation

This projekt uses PlatformIO to build and upload the firmware.

For now, only Linux instructions are available.

Prerequisites

In order to build and upload this project, PlatformIO is required.

Debian/Ubuntu based distributions

sudo apt install python3-pip
sudo pip install -U platformio

Get code

git clone https://github.com/c5n/oh-ez-touch.git

Configuration

It is possible to configure WLAN SSID and password before compilation, so the ESP32 connects right to your WLAN. Of course, other things can be changed as well. Configuration file: data/config.json

If you don't change the settings or the device can not connect to your network, the ESP32 will switch to AccessPoint mode. You can connect to it using a MobilePhone. See chapter Usage for more details.

Build

cd oh-ez-touch
pio run

Upload

Example for Connecting UART TTL Adapters for flashing works for me:

  • Put UART TTL Adapter on 5V with jumper
  • UART VCC connection to ESP32 5V
  • UART GND connection to ESP32 GND (6. PIN same Row 5V)
  • UART RX connection to ESP32 TXD
  • UART TX connection to ESP32 RXD
  • Connect ESP GND to ESP G0 for Flashing Mode

Connect the ESP32 board to your computer. A ttyUSB device should appear. It will likely be /dev/ttyUSB0 if no other USB-serial adapters are connected. Use following Command after connecting to identify just connected adapters

dmesg | grep /dev/ttyUSB

2 files have to be uploaded: The filesystem image and the firmware.

If you have no user rights to access the /dev/ttyUSB device, one option is to add a sudo. Another would be to add udev rules to allow user access.

Execute the following command to upload firmware. Upon the output of Connecting........_____ press and hold BOOT button on ESP32 until the upload process starts. !! In some circumstances (don't know why) the RST needs to be pushed short time to connect instead of BOOT !!

Upload the filesystem image.

pio run -t uploadfs --upload-port /dev/ttyUSB0

ArduiTouch

For the version with the 2.4" display.

pio run -t upload -e ArduiTouch --upload-port /dev/ttyUSB0

ArduiTouch 2.8"

For the version with the 2.8" display.

pio run -t upload -e ArduiTouch28 --upload-port /dev/ttyUSB0

Update tool

To update one or more devices over the air, a simple script is provided in the tools folder.

Usage:
    ./tools/batchupdate.sh [-p] -t <target> <hostname1> <hostname2> ...
    ./tools/batchupdate.sh [-p] -l <listfile>

    -p              Parallel multi process update

    -t <target>     Target should be one of the available build targets.
                    e.g. ArduiTouch28

    -l <listfile>   Text file with list of target and hostnames.
                    Each line has target hostname, separated by tabs or spaces.

If you have more than one ArduiTouch device, it makes sense to create a listfile with all of your devices.

Example myOhEzTouchDevices.txt:

ArduiTouch      oheztouch-01
ArduiTouch28    oheztouch-02
ArduiTouch      oheztouch-03

!!! Please be aware of, a Carriage Return after last device in list is needed !!!

It is possible to update all devices in parallel by using the -p option.

Update project folder

git pull

Rebuild targets

pio run

Roll out update

Example for update of all of your devices by using the listfile:

./tools/batchupdate.sh -p -l myOhEzTouchDevices.txt

Usage

OpenHAB Sitemap

Sitemaps for the OhEzTouch can contain the following elements:

  • Colorpicker
  • Selection
  • Setpoint
  • Slider
  • Switch
  • Text
  • Default

Example sitemap (oheztouch.sitemap):

sitemap oheztouch label="OhEzTouch Test"
{
    Switch      item=OHEZTOUCH_Switch
    Selection   item=OHEZTOUCH_Switch mappings=[OFF="Off", ON="On"]
    Selection   item=OHEZTOUCH_Select mappings=["SEL1"="Selection 1", "SEL2"="Selection 2", "SEL3"="Selection 3"]
    Default     item=OHEZTOUCH_Player
    Default     item=OHEZTOUCH_Rollershutter

    Text label="Submenu" icon="settings"
    {
        Setpoint    item=OHEZTOUCH_Number label="Setpoint"  minValue=-10 maxValue=10 step=0.5
        Slider      item=OHEZTOUCH_Number label="Slider"    minValue=-10 maxValue=10 step=1
        Text        item=OHEZTOUCH_Number label="Text"
        Colorpicker item=OHEZTOUCH_Color
    }
}

Items for example sitemap:

String          OHEZTOUCH_Select        "Selection"         <fan>
String          OHEZTOUCH_String        "String"            <text>
Switch          OHEZTOUCH_Switch        "Switch"            <switch>
Number          OHEZTOUCH_Number        "Number [%.1f °C]"  <temperature>
Color           OHEZTOUCH_Color         "Color [%s]"        <colorlight>
Player          OHEZTOUCH_Player        "Player"            <receiver>
Rollershutter   OHEZTOUCH_Rollershutter "Rollershutter"     <blinds>

Power up

Connect the ArduiTouch to an appropriate power suppy (e.g. 12 V, 300 mA).

Configuration

If you have configured your WLAN and other things in the data/config.json file, the ArdioTouch should connect and try to load the sitemap right away. Great, you can skip the following steps.

Configure new AP

On pristine devices, no WLAN is configured. The ArduiTouch will start an AccessPoint called oheztouch-new after about 30 seconds.

Connect your smartphone to this unsecured WLAN. A notification should appear: "Sign in to a Wi-Fi network". This is the portal page of the ArduiTouch. Click on that.

In the upper right is the menu. Select "Configure new AP".

browser_wlanconfig

Fill in your WLAN credentials and click Apply. The ArduiTouch will try to connect.

Systeminfo

The IP received from your DHCP server and other information can be obtained by touching the upper bar on the screen.

OpenHAB Settings

browser_openhabconfig

General
Setting Default Description
Hostname oheztouch-new Set the hostname of this device according to your naming convention
NTP Time
Setting Default Description
Host pool.ntp.org Host which serves the time. e.g. pool.ntp.org or your router.
GMT Offset 1 Offset of your timezone from Greenwich Mean Time
Daylight Saving 0 Daylight saving +1 hour
LCD Backlight Dimming
Setting Default Description
Activity timeout 60 After the timeout defined in seconds since last touch the display will dim down
Normal Brightness 100 Normal brightness level in percent
Dim Brightness 40 Dim brightness level in percent
Beeper
Setting Default Description
Enable Beeper On Enable blips and bleeps
Openhab Server
Setting Default Description
Host openhabian Hostname of the OpenHAB server
Port 8080 Port
Sitemap oheztouch Name of the sitemap you've setup for this ArduiTouch device

Fix icons

Some of the original openhab-webui icons are exceptionally large for no reason. Since the ESP32 has limited RAM resources, we have to take file sizes into account. Re-encoding of the PNG graphic files using '''convert''' is the solution for now.

sudo apt install imagemagick
git clone https://github.com/openhab/openhab-webui.git
cd openhab-webui/bundles/org.openhab.ui.iconset.classic/src/main/resources/icons
mkdir output
for f in *.png; do convert $f -strip output/$f; done

Move the files from output folder to your openhab2-conf/icons/classic/ folder.

I know, this is not very convenient. Finding a solution has top priority on my todo list.

Development

The project is still under development, but is already very usable.

If you have any comments, suggestions or even code to submit, please let me know. I'm happy to hear from you. :)

Contact: c5n AT posteo DOT de

ToDo list

  • openhab_ui: Fix icon loading. Some of the original icon file sizes are too large and have to be reencoded.
  • openhab_ui: Auto close item manipulation window after timeout
  • openhab_ui: Auto back to homescreen after timeout
  • openhab_ui: Prefer widget label text instead of item label text
  • openhab_ui: Add secured sections with PIN protection
  • openhab_ui: Improve selection, setpoint and slider elements
  • ac: Improve OTA firmware update --> batchupdate.sh
  • main: Show portal active icon
  • openhab_ui: Add theme support
  • main: Add screen calibration
  • main: Add setup wizard with WLAN credential input instead of portal procedure
  • sensors: Sensors should submit update instead of command
  • sensors: Support DS18B20 onewire sensors

License

GNU General Public License v3.0

Greetings to 3rd party projects and libraries

This project was created using the following projects and libraries. A big thank you to all of them and the ones I missed:

About

OhEzTouch is a simple always-on touch control device for home automation systems driven by OpenHAB.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 51.1%
  • C++ 48.7%
  • Shell 0.2%