Stocko fix

[balcer]

During 3D model generation I noted that I broke footprints.

https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15

---

All contributions to the kicad library must follow the KiCad library convention

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items:

• Provide a URL to a datasheet for the footprint(s) you are contributing
• An example screenshot image is very helpful
• If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
• Check the output of the Travis automated check scripts - fix any errors as required
• Give a reason behind any intentional library convention rule violation.

[myfreescalewebpage]

@balcer many files changed here, is it really wanted ? Please have a look at the git diff, thanks!

[evanshultz]

The CONNFLY USB connector is probably an accident. All other changes files are Stocko MKS parts. Note that I didn't check each one, just quickly looked at changed files.

pointhi/kicad-footprint-generator#298 is the PR for the script fix that drove this, so these are generated by script, which is why some footprints only had the time stamp changed.

[myfreescalewebpage]

The CONNFLY USB connector is probably an accident

Yes I think too

[balcer]

Now should be ok. sorry for problems

[evanshultz]

I just quickly checked the script fix and it did add the -X offset at 3.6mm from pin 1, which is the correct dimension in the datasheet. I added more notes at the script PR that don't affect the footprint.

Looking at the code paths, and even though they were submitted and checked at #1403, I dimensioned both 2-pin, the 3-pin, and the highest pin count footprints:

[balcer]

thx