Skip to content

Latest commit

 

History

History
427 lines (298 loc) · 33.1 KB

0x05e-Testing-Cryptography.md

File metadata and controls

427 lines (298 loc) · 33.1 KB

Android Cryptographic APIs

In the chapter "Cryptography for Mobile Apps", we introduced general cryptography best practices and described typical flaws that can occur when cryptography is used incorrectly in mobile apps. In this chapter, we'll go into more detail on Android's cryptography APIs. We'll show how to identify uses of those APIs in the source code and how to interpret the configuration. When reviewing code, make sure to compare the cryptographic parameters used with the current best practices linked from this guide.

We can identify key components of cryptography system in Android:

  • Security Provider
  • KeyStore - see the section KeyStore in the chapter "Testing Data Storage"
  • KeyChain - see the section KeyChain in the chapter "Testing Data Storage"

Android cryptography APIs are based on the Java Cryptography Architecture (JCA). JCA separates the interfaces and implementation, making it possible to include several security providers that can implement sets of cryptographic algorithms. Most of the JCA interfaces and classes are defined in the java.security.* and javax.crypto.* packages. In addition, there are Android specific packages android.security.* and android.security.keystore.*.

KeyStore and KeyChain provide APIs for storing and using keys (behind the scene, KeyChain API uses KeyStore system). These systems allow to administer the full lifecycle of the cryptographic keys. Requirements and guidance for implementation of cryptographic key management can be found in Key Management Cheat Sheet. We can identify following phases:

  • generating a key
  • using a key
  • storing a key
  • archiving a key
  • deleting a key

Please note that storing of a key is analyzed in the chapter "Testing Data Storage".

These phases are managed by the Keystore/KeyChain system. However how the system works depends on how the application developer implemented it. For the analysis process you should focus on functions which are used by the application developer. You should identify and verify the following functions:

Apps that target modern API levels, went through the following changes:

  • For Android 7.0 (API level 24) and above the Android Developer blog shows that:
    • It is recommended to stop specifying a security provider. Instead, always use a patched security provider.
    • The support for the Crypto provider has dropped and the provider is deprecated. The same applies to its SHA1PRNG for secure random.
  • For Android 8.1 (API level 27) and above the Developer Documentation shows that:
    • Conscrypt, known as AndroidOpenSSL, is preferred above using Bouncy Castle and it has new implementations: AlgorithmParameters:GCM , KeyGenerator:AES, KeyGenerator:DESEDE, KeyGenerator:HMACMD5, KeyGenerator:HMACSHA1, KeyGenerator:HMACSHA224, KeyGenerator:HMACSHA256, KeyGenerator:HMACSHA384, KeyGenerator:HMACSHA512, SecretKeyFactory:DESEDE, and Signature:NONEWITHECDSA.
    • You should not use the IvParameterSpec.class anymore for GCM, but use the GCMParameterSpec.class instead.
    • Sockets have changed from OpenSSLSocketImpl to ConscryptFileDescriptorSocket, and ConscryptEngineSocket.
    • SSLSession with null parameters give a NullPointerException.
    • You need to have large enough arrays as input bytes for generating a key otherwise, an InvalidKeySpecException is thrown.
    • If a Socket read is interrupted, you get a SocketException.
  • For Android 9 (API level 28) and above the Android Developer Blog shows even more changes:
    • You get a warning if you still specify a security provider using the getInstance method and you target any API below 28. If you target Android 9 (API level 28) or above, you get an error.
    • The Crypto security provider is now removed. Calling it will result in a NoSuchProviderException.
  • For Android 10 (API level 29) the Developer Documentation lists all network security changes.

Recommendations

The following list of recommendations should be considered during app examination:

  • You should ensure that the best practices outlined in the "Cryptography for Mobile Apps" chapter are followed.
  • You should ensure that security provider has the latest updates - Updating security provider.
  • You should stop specifying a security provider and use the default implementation (AndroidOpenSSL, Conscrypt).
  • You should stop using Crypto security provider and its SHA1PRNG as they are deprecated.
  • You should specify a security provider only for the Android Keystore system.
  • You should stop using Password-based encryption ciphers without IV.
  • You should use KeyGenParameterSpec instead of KeyPairGeneratorSpec.

Security provider

Android relies on provider to implement Java Security services. That is crucial to ensure secure network communications and secure other functionalities which depend on cryptography.

The list of security providers included in Android varies between versions of Android and the OEM-specific builds. Some security provider implementations in older versions are now known to be less secure or vulnerable. Thus, Android applications should not only choose the correct algorithms and provide good configuration, in some cases they should also pay attention to the strength of the implementations in the legacy security providers.

You can list the set of existing security providers using following code:

StringBuilder builder = new StringBuilder();
for (Provider provider : Security.getProviders()) {
    builder.append("provider: ")
            .append(provider.getName())
            .append(" ")
            .append(provider.getVersion())
            .append("(")
            .append(provider.getInfo())
            .append(")\n");
}
String providers = builder.toString();
//now display the string on the screen or in the logs for debugging.

Below you can find the output of a running Android 4.4 (API level 19) in an emulator with Google Play APIs, after the security provider has been patched:

provider: GmsCore_OpenSSL1.0 (Android's OpenSSL-backed security provider)
provider: AndroidOpenSSL1.0 (Android's OpenSSL-backed security provider)
provider: DRLCertFactory1.0 (ASN.1, DER, PkiPath, PKCS7)
provider: BC1.49 (BouncyCastle Security Provider v1.49)
provider: Crypto1.0 (HARMONY (SHA1 digest; SecureRandom; SHA1withDSA signature))
provider: HarmonyJSSE1.0 (Harmony JSSE Provider)
provider: AndroidKeyStore1.0 (Android AndroidKeyStore security provider)

Below you can find the output of a running Android 9 (API level 28) in an emulator with Google Play APIs:

provider: AndroidNSSP 1.0(Android Network Security Policy Provider)
provider: AndroidOpenSSL 1.0(Android's OpenSSL-backed security provider)
provider: CertPathProvider 1.0(Provider of CertPathBuilder and CertPathVerifier)
provider: AndroidKeyStoreBCWorkaround 1.0(Android KeyStore security provider to work around Bouncy Castle)
provider: BC 1.57(BouncyCastle Security Provider v1.57)
provider: HarmonyJSSE 1.0(Harmony JSSE Provider)
provider: AndroidKeyStore 1.0(Android KeyStore security provider)

Updating security provider

Keeping up-to-date and patched component is one of security principles. The same applies to provider. Application should check if used security provider is up-to-date and if not, update it. It is related to Checking for Weaknesses in Third Party Libraries (MSTG-CODE-5).

Older Android versions

For some applications that support older versions of Android (e.g.: only used versions lower than Android 7.0 (API level 24)), bundling an up-to-date library may be the only option. Spongy Castle (a repackaged version of Bouncy Castle) is a common choice in these situations. Repackaging is necessary because Bouncy Castle is included in the Android SDK. The latest version of Spongy Castle likely fixes issues encountered in the earlier versions of Bouncy Castle that were included in Android. Note that the Bouncy Castle libraries packed with Android are often not as complete as their counterparts from the legion of the Bouncy Castle. Lastly: bear in mind that packing large libraries such as Spongy Castle will often lead to a multidexed Android application.

Key Generation

Android SDK provides mechanisms for specifying secure key generation and use. Android 6.0 (API level 23) introduced the KeyGenParameterSpec class that can be used to ensure the correct key usage in the application.

Here's an example of using AES/CBC/PKCS7Padding on API 23+:

String keyAlias = "MySecretKey";

KeyGenParameterSpec keyGenParameterSpec = new KeyGenParameterSpec.Builder(keyAlias,
        KeyProperties.PURPOSE_ENCRYPT | KeyProperties.PURPOSE_DECRYPT)
        .setBlockModes(KeyProperties.BLOCK_MODE_CBC)
        .setEncryptionPaddings(KeyProperties.ENCRYPTION_PADDING_PKCS7)
        .setRandomizedEncryptionRequired(true)
        .build();

KeyGenerator keyGenerator = KeyGenerator.getInstance(KeyProperties.KEY_ALGORITHM_AES,
        "AndroidKeyStore");
keyGenerator.init(keyGenParameterSpec);

SecretKey secretKey = keyGenerator.generateKey();

The KeyGenParameterSpec indicates that the key can be used for encryption and decryption, but not for other purposes, such as signing or verifying. It further specifies the block mode (CBC), padding (PKCS #7), and explicitly specifies that randomized encryption is required (this is the default). "AndroidKeyStore" is the name of security provider used in this example. This will automatically ensure that the keys are stored in the AndroidKeyStore which is beneficiary for the protection of the key.

GCM is another AES block mode that provides additional security benefits over other, older modes. In addition to being cryptographically more secure, it also provides authentication. When using CBC (and other modes), authentication would need to be performed separately, using HMACs (see the "Tampering and Reverse Engineering on Android" chapter). Note that GCM is the only mode of AES that does not support paddings.

Attempting to use the generated key in violation of the above spec would result in a security exception.

Here's an example of using that key to encrypt:

String AES_MODE = KeyProperties.KEY_ALGORITHM_AES
        + "/" + KeyProperties.BLOCK_MODE_CBC
        + "/" + KeyProperties.ENCRYPTION_PADDING_PKCS7;
KeyStore AndroidKeyStore = AndroidKeyStore.getInstance("AndroidKeyStore");

// byte[] input
Key key = AndroidKeyStore.getKey(keyAlias, null);

Cipher cipher = Cipher.getInstance(AES_MODE);
cipher.init(Cipher.ENCRYPT_MODE, key);

byte[] encryptedBytes = cipher.doFinal(input);
byte[] iv = cipher.getIV();
// save both the IV and the encryptedBytes

Both the IV (initialization vector) and the encrypted bytes need to be stored; otherwise decryption is not possible.

Here's how that cipher text would be decrypted. The input is the encrypted byte array and iv is the initialization vector from the encryption step:

// byte[] input
// byte[] iv
Key key = AndroidKeyStore.getKey(AES_KEY_ALIAS, null);

Cipher cipher = Cipher.getInstance(AES_MODE);
IvParameterSpec params = new IvParameterSpec(iv);
cipher.init(Cipher.DECRYPT_MODE, key, params);

byte[] result = cipher.doFinal(input);

Since the IV is randomly generated each time, it should be saved along with the cipher text (encryptedBytes) in order to decrypt it later.

Prior to Android 6.0 (API level 23), AES key generation was not supported. As a result, many implementations chose to use RSA and generated a public-private key pair for asymmetric encryption using KeyPairGeneratorSpec or used SecureRandom to generate AES keys.

Here's an example of KeyPairGenerator and KeyPairGeneratorSpec used to create the RSA key pair:

Date startDate = Calendar.getInstance().getTime();
Calendar endCalendar = Calendar.getInstance();
endCalendar.add(Calendar.YEAR, 1);
Date endDate = endCalendar.getTime();
KeyPairGeneratorSpec keyPairGeneratorSpec = new KeyPairGeneratorSpec.Builder(context)
        .setAlias(RSA_KEY_ALIAS)
        .setKeySize(4096)
        .setSubject(new X500Principal("CN=" + RSA_KEY_ALIAS))
        .setSerialNumber(BigInteger.ONE)
        .setStartDate(startDate)
        .setEndDate(endDate)
        .build();

KeyPairGenerator keyPairGenerator = KeyPairGenerator.getInstance("RSA",
        "AndroidKeyStore");
keyPairGenerator.initialize(keyPairGeneratorSpec);

KeyPair keyPair = keyPairGenerator.generateKeyPair();

This sample creates the RSA key pair with a key size of 4096-bit (i.e. modulus size). Elliptic Curve (EC) keys can also be generated in a similar way. However as of Android 11, AndroidKeyStore does not support encryption or decryption with EC keys. They can only be used for signatures.

A symmetric encryption key can be generated from the passphrase by using the Password Based Key Derivation Function version 2 (PBKDF2). This cryptographic protocol is designed to generate cryptographic keys, which can be used for cryptography purpose. Input parameters for the algorithm are adjusted according to weak key generation function section. The code listing below illustrates how to generate a strong encryption key based on a password.

public static SecretKey generateStrongAESKey(char[] password, int keyLength)
{
    //Initiliaze objects and variables for later use
    int iterationCount = 10000;
    int saltLength     = keyLength / 8;
    SecureRandom random = new SecureRandom();
    //Generate the salt
    byte[] salt = new byte[saltLength];
    random.nextBytes(salt);
    KeySpec keySpec = new PBEKeySpec(password.toCharArray(), salt, iterationCount, keyLength);
    SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");
    byte[] keyBytes = keyFactory.generateSecret(keySpec).getEncoded();
    return new SecretKeySpec(keyBytes, "AES");
}

The above method requires a character array containing the password and the needed key length in bits, for instance a 128 or 256-bit AES key. We define an iteration count of 10,000 rounds which will be used by the PBKDF2 algorithm. Increasing number of iteration significantly increases the workload for a brute-force attack on password, however it can affect performance as more computational power is required for key derivation. We define the salt size equal to the key length, we divide by 8 to take care of the bit to byte conversion. We use the SecureRandom class to randomly generate a salt. Obviously, the salt is something you want to keep constant to ensure the same encryption key is generated time after time for the same supplied password. Note that you can store the salt privately in SharedPreferences. It is recommended to exclude the salt from the Android backup mechanism to prevent synchronization in case of higher risk data.

Note that if you take a rooted device or a patched (e.g. repackaged) application into account as a threat to the data, it might be better to encrypt the salt with a key that is placed in the AndroidKeystore. The Password-Based Encryption (PBE) key is generated using the recommended PBKDF2WithHmacSHA1 algorithm, till Android 8.0 (API level 26). For higher API levels, it is best to use PBKDF2withHmacSHA256, which will end up with a longer hash value.

Note: there is a widespread false believe that the NDK should be used to hide cryptographic operations and hardcoded keys. However, using this mechanism is not effective. Attackers can still use tools to find the mechanism used and make dumps of the key in memory. Next, the control flow can be analyzed with e.g. radare2 and the keys extracted with the help of Frida or the combination of both: r2frida (see sections "Disassembling Native Code", "Memory Dump" and "In-Memory Search" in the chapter "Tampering and Reverse Engineering on Android" for more details). From Android 7.0 (API level 24) onward, it is not allowed to use private APIs, instead: public APIs need to be called, which further impacts the effectiveness of hiding it away as described in the Android Developers Blog

Random number generation

Cryptography requires secure pseudo random number generation (PRNG). Standard Java classes as java.util.Random do not provide sufficient randomness and in fact may make it possible for an attacker to guess the next value that will be generated, and use this guess to impersonate another user or access sensitive information.

In general, SecureRandom should be used. However, if the Android versions below Android 4.4 (API level 19) are supported, additional care needs to be taken in order to work around the bug in Android 4.1-4.3 (API level 16-18) versions that failed to properly initialize the PRNG.

Most developers should instantiate SecureRandom via the default constructor without any arguments. Other constructors are for more advanced uses and, if used incorrectly, can lead to decreased randomness and security. The PRNG provider backing SecureRandom uses the SHA1PRNG from AndroidOpenSSL (Conscrypt) provider.

Testing Symmetric Cryptography (MSTG-CRYPTO-1)

Overview

This test case focuses on hardcoded symmetric cryptography as the only method of encryption. The following checks should be performed:

  • identify all instances of symmetric cryptography
  • for each identified instance verify if there are any hardcoded symmetric keys
  • verify if hardcoded symmetric cryptography is not used as the only method of encryption

Static Analysis

Identify all the instances of symmetric key encryption in code and look for any mechanism which loads or provides a symmetric key. You can look for:

  • symmetric algorithms (such as DES, AES, etc.)
  • specifications for a key generator (such as KeyGenParameterSpec, KeyPairGeneratorSpec, KeyPairGenerator, KeyGenerator, KeyProperties, etc.)
  • classes importing java.security.*, javax.crypto.*, android.security.*, android.security.keystore.*

For each identified instance verify if the used symmetric keys:

  • are not part of the application resources
  • cannot be derived from known values
  • are not hardcoded in code

For each hardcoded symmetric key, verify that is not used in security-sensitive contexts as the only method of encryption.

As an example we illustrate how to locate the use of a hardcoded encryption key. First disassemble and decompile the app to obtain Java code, e.g. by using jadx.

Now search the files for the usage of the SecretKeySpec class, e.g. by simply recursively grepping on them or using jadx search function:

$ grep -r "SecretKeySpec"

This will return all classes using the SecretKeySpec class. Now examine those files and trace which variables are used to pass the key material. The figure below shows the result of performing this assessment on a production ready application. We can clearly locate the use of a static encryption key that is hardcoded and initialized in the static byte array Encrypt.keyBytes.

Dynamic Analysis

You can use method tracing on cryptographic methods to determine input / output values such as the keys that are being used. Monitor file system access while cryptographic operations are being performed to assess where key material is written to or read from. For example, monitor the file system by using the API monitor of RMS - Runtime Mobile Security.

Testing the Configuration of Cryptographic Standard Algorithms (MSTG-CRYPTO-2, MSTG-CRYPTO-3 and MSTG-CRYPTO-4)

Overview

These test cases focus on implementation and use of cryptographic primitives. Following checks should be performed:

  • identify all instance of cryptography primitives and their implementation (library or custom implementation)
  • verify how cryptography primitives are used and how they are configured
  • verify if cryptographic protocols and algorithms used are not deprecated for security purposes.

Static Analysis

Identify all the instances of the cryptographic primitives in code. Identify all custom cryptography implementations. You can look for:

  • classes Cipher, Mac, MessageDigest, Signature
  • interfaces Key, PrivateKey, PublicKey, SecretKey
  • functions getInstance, generateKey
  • exceptions KeyStoreException, CertificateException, NoSuchAlgorithmException
  • classes which uses java.security.*, javax.crypto.*, android.security.* and android.security.keystore.* packages.

Identify that all calls to getInstance use default provider of security services by not specifying it (it means AndroidOpenSSL aka Conscrypt). Provider can only be specified in KeyStore related code (in that situation KeyStore should be provided as provider). If other provider is specified it should be verified according to situation and business case (i.e. Android API version), and provider should be examined against potential vulnerabilities.

Ensure that the best practices outlined in the "Cryptography for Mobile Apps" chapter are followed. Look at insecure and deprecated algorithms and common configuration issues.

Dynamic Analysis

You can use method tracing on cryptographic methods to determine input / output values such as the keys that are being used. Monitor file system access while cryptographic operations are being performed to assess where key material is written to or read from. For example, monitor the file system by using the API monitor of RMS - Runtime Mobile Security.

Testing the Purposes of Keys (MSTG-CRYPTO-5)

Overview

This test case focuses on verification of purpose and reusage of the same cryptographic keys. The following checks should be performed:

  • identify all instances where cryptography is used
  • identify the purpose of the cryptographic material (to protect data in use, in transit or at rest)
  • identify type of cryptography
  • verify if cryptography is used according to its purpose

Static Analysis

Identify all instances where cryptography is used. You can look for:

  • classes Cipher, Mac, MessageDigest, Signature
  • interfaces Key, PrivateKey, PublicKey, SecretKey
  • functions getInstance, generateKey
  • exceptions KeyStoreException, CertificateException, NoSuchAlgorithmException
  • classes importing java.security.*, javax.crypto.*, android.security.*, android.security.keystore.*

For each identified instance, identify its purpose and its type. It can be used:

  • for encryption/decryption - to ensure data confidentiality
  • for signing/verifying - to ensure integrity of data (as well as accountability in some cases)
  • for maintenance - to protect keys during certain sensitive operations (such as being imported to the KeyStore)

Additionally, you should identify the business logic which uses identified instances of cryptography.

During verification the following checks should be performed:

  • are all keys used according to the purpose defined during its creation? (it is relevant to KeyStore keys, which can have KeyProperties defined)
  • for asymmetric keys, is the private key being exclusively used for signing and the public key encryption?
  • are symmetric keys used for multiple purposes? A new symmetric key should be generated if it's used in a different context.
  • is cryptography used according to its business purpose?

Dynamic Analysis

You can use method tracing on cryptographic methods to determine input / output values such as the keys that are being used. Monitor file system access while cryptographic operations are being performed to assess where key material is written to or read from. For example, monitor the file system by using the API monitor of RMS - Runtime Mobile Security.

Testing Random Number Generation (MSTG-CRYPTO-6)

Overview

This test case focuses on random values used by application. The following checks should be performed:

  • identify all instances where random values are used
  • verify if random number generators are not considered as being cryptographically secure
  • verify how random number generators are used
  • verify randomness of the generated random values

Static Analysis

Identify all the instances of random number generators and look for either custom or well-known insecure classes. For instance, java.util.Random produces an identical sequence of numbers for each given seed value; consequently, the sequence of numbers is predictable. Instead a well-vetted algorithm should be chosen that is currently considered to be strong by experts in the field, and a well-tested implementations with adequate length seeds should be used.

Identify all instances of SecureRandom that are not created using the default constructor. Specifying the seed value may reduce randomness. Prefer the no-argument constructor of SecureRandom that uses the system-specified seed value to generate a 128-byte-long random number.

In general, if a PRNG is not advertised as being cryptographically secure (e.g. java.util.Random), then it is probably a statistical PRNG and should not be used in security-sensitive contexts. Pseudo-random number generators can produce predictable numbers if the generator is known and the seed can be guessed. A 128-bit seed is a good starting point for producing a "random enough" number.

Once an attacker knows what type of weak pseudo-random number generator (PRNG) is used, it can be trivial to write a proof-of-concept to generate the next random value based on previously observed ones, as it was done for Java Random. In case of very weak custom random generators it may be possible to observe the pattern statistically. Although the recommended approach would anyway be to decompile the APK and inspect the algorithm (see Static Analysis).

If you want to test for randomness, you can try to capture a large set of numbers and check with the Burp's sequencer to see how good the quality of the randomness is.

Dynamic Analysis

You can use method tracing on the mentioned classes and methods to determine input / output values being used.

References

  • [#nelenkov] - N. Elenkov, Android Security Internals, No Starch Press, 2014, Chapter 5.

Cryptography references

SecureRandom references

Testing Key Management references

Key Attestation References

OWASP MASVS

  • MSTG-STORAGE-1: "System credential storage facilities need to be used to store sensitive data, such as PII, user credentials or cryptographic keys."
  • MSTG-CRYPTO-1: "The app does not rely on symmetric cryptography with hardcoded keys as a sole method of encryption."
  • MSTG-CRYPTO-2: "The app uses proven implementations of cryptographic primitives."
  • MSTG-CRYPTO-3: "The app uses cryptographic primitives that are appropriate for the particular use-case, configured with parameters that adhere to industry best practices."
  • MSTG-CRYPTO-4: "The app does not use cryptographic protocols or algorithms that are widely considered deprecated for security purposes."
  • MSTG-CRYPTO-5: "The app doesn't re-use the same cryptographic key for multiple purposes."
  • MSTG-CRYPTO-6: "All random values are generated using a sufficiently secure random number generator."