Fedora support

HACKING.md

@@ -30,6 +30,7 @@
 - ```ARCH``` uses kernel's naming, ```arm```, ```arm64``` etc.
 - ```ARCH_UNAME``` is what appears in uname -m, ```armv7l```, ```aarch64``` etc.
 - ```ARCH_DEB``` is whatever debian calls the architecture of device, ```armhf```, ```arm64```
+- ```ARCH_FED``` is what fedora calls the architecture of device, ```armhfp```, ```aarch64```
 - YES ALL THIS ARCH STUFF IS A GIANT MESS
 - ```CROSS_COMPILE``` is self-explanatory
 - ```SOC``` - self explanatory

README.md

@@ -59,6 +59,7 @@ Once you have this out, continue with instructions:
 - Recent Linux distribution
 - Binfmt when Debian rootfs is used
 - ```debootstrap``` when Debian rootfs is used
+- ```dnf``` when Fedora rootfs is used (add repos and GPG keys with ```fedora-repos``` and ```fedora-gpg-keys``` RPMs)
 - ```qemu-user-static``` when build machine can't run binaries for target machine
 - ```vboot-utils u-boot-tools``` (vbutil_kernel, cgpt and mkimage) to pack kernel into format understandable by depthcharge
 - ```gcc-aarch64-linux-gnu``` for compiling to ARM64 or ```gcc-arm-linux-gnueabihf``` for compiling to ARMv7

baseboard/gru/boardinfo

@@ -4,6 +4,7 @@
 export ARCH=arm64
 export ARCH_UNAME=aarch64
 export ARCH_DEB=arm64
+export ARCH_FED=aarch64
 export CROSS_COMPILE=aarch64-linux-gnu-
 
 export EMMC_OFFSET=0

baseboard/kukui/boardinfo

@@ -4,6 +4,7 @@
 export ARCH=arm64
 export ARCH_UNAME=aarch64
 export ARCH_DEB=arm64
+export ARCH_FED=aarch64
 export CROSS_COMPILE=aarch64-linux-gnu-
 
 export EMMC_OFFSET=0

baseboard/lemote2f/boardinfo

@@ -4,6 +4,7 @@
 export ARCH=mips
 export ARCH_UNAME=mips64el
 export ARCH_DEB=mips64el
+export ARCH_FED=0
 export CROSS_COMPILE=mips64el-linux-gnuabi64-
 
 export EMMC_OFFSET=0

baseboard/trogdor/boardinfo

@@ -4,6 +4,7 @@
 export ARCH=arm64
 export ARCH_UNAME=aarch64
 export ARCH_DEB=arm64
+export ARCH_FED=aarch64
 export CROSS_COMPILE=aarch64-linux-gnu-
 
 export EMMC_OFFSET=0

baseboard/veyron/boardinfo

@@ -4,6 +4,7 @@
 export ARCH=arm
 export ARCH_UNAME=armv7l
 export ARCH_DEB=armhf
+export ARCH_FED=armhfp
 export CROSS_COMPILE=arm-linux-gnueabihf-
 
 export EMMC_OFFSET=16384

config

@@ -11,7 +11,7 @@ else
 fi
 
 # RootFS type
-# One of: debian, void, void-musl, ubuntu
+# One of: debian, fedora, void, void-musl, ubuntu
 ROOTFS=debian
 
 # FS type

fs/build

@@ -83,6 +83,40 @@ case "$ROOTFS" in
 		chroot root/ $qemu /bin/apt install -y vim network-manager debootstrap parted f2fs-tools libudev-dev build-essential git firmware-ath9k-htc kmscube weston
 		[ $BOOTFW = depthcharge ] && chroot root/ $qemu /bin/apt install -y vboot-utils
 	;;
+	fedora)
+		echo "Installing Fedora Linux"
+		case "$ARCH_FED" in # TODO: option to choose Fedora release in config
+			armhfp)
+				IMAGE_URL="https://download.fedoraproject.org/pub/fedora/linux/releases/35/Spins/armhfp/images/Fedora-Minimal-35-1.2.armhfp.raw.xz"
+			;;
+			aarch64)
+				IMAGE_URL="https://download.fedoraproject.org/pub/fedora-secondary/releases/35/Spins/aarch64/images/Fedora-Minimal-35-1.2.aarch64.raw.xz"
+			;;
+			0)
+				echo "Fedora is not supported for $SOC devices"
+				return 1
+		esac
+		if [ ! -f "fedora-$ARCH_FED.rootfs" ]; then
+			wget $IMAGE_URL -O fedora-$ARCH_FED.raw.xz
+			xz -vd fedora-$ARCH_FED.raw.xz
+			IMAGE_LOOP=$(losetup -f -P fedora-$ARCH_FED.raw --show)
+			dd if=${IMAGE_LOOP}p3 of=fedora-$ARCH_FED.rootfs
+			losetup -d $IMAGE_LOOP
+		fi
+		# rootfs is 3rd partiton of raw image
+		mkdir -p fedorarootfsimg
+		mount fedora-$ARCH_FED.rootfs fedorarootfsimg/
+		rsync -aHAX fedorarootfsimg/* $CADMIUMROOT/tmp/root
+		for x in {1..3}; do sed -i '$d' root/etc/fstab; sleep 1; done # remove / , /boot, /boot/efi from fstab
+		cp fedora-$ARCH_FED.rootfs root/fedora-$ARCH_FED.rootfs
+		# disable inital-setup and unlock root account
+		unlink root/etc/systemd/system/graphical.target.wants/initial-setup.service
+		unlink root/etc/systemd/system/multi-user.target.wants/initial-setup.service
+		chroot root/ $qemu /bin/passwd -f -u root
+		# FIXME: installing NetworkManager-tui breaks wifi?? use nmcli in the meantime
+		dnf install -y --installroot=$CADMIUMROOT/tmp/root/ --forcearch=aarch64 --releasever=35 vboot-utils parted f2fs-tools make git rsync
+		umount fedorarootfsimg/
+	;;
 	# let's explain this: when void is set, $V is set to -v, so it does 'grep -v musl', printing link without musl
 	# when $V is not set, grep is 'grep musl', printing only link with musl
 	void)
@@ -113,7 +147,7 @@ case "$ROOTFS" in
 esac
 
 # remove root password, this is install medium so it's ok, not needed in ubports
-[ ! "$ROOTFS" = "ubports" ] && chroot root/ $qemu /bin/passwd -d root
+[ ! "$ROOTFS" = "ubports" ] && chroot root/ $qemu /bin/passwd -f -d root
 
 # workaround bad touchpad experience on certain boards
 mkdir -p $CADMIUMROOT/tmp/root/etc/libinput

fs/fedora/install-to-emmc-middle

@@ -0,0 +1,16 @@
+# start of install-to-emmc-middle
+
+export SYSTEMD=1
+export EUDEV=0
+export SKIP_CD_USER_SETUP=1
+
+mkdir -p fedorarootfsimg
+mount /fedora-$ARCH_FED.rootfs fedorarootfsimg/
+
+rsync -aHAX fedorarootfsimg/* /mnt/
+for x in {1..3}; do sed -i '$d' /mnt/etc/fstab; sleep 1; done # remove / , /boot, /boot/efi from fstab
+
+umount fedorarootfsimg
+rm -rf fedorarootfsimg
+
+# end of install-to-emmc-middle

fs/install-to-emmc-begin

@@ -18,9 +18,12 @@ if [ "$BASEBOARD" = "trogdor" ]; then
 fi
 
 # we need internet, TODO: make this run on voidlinux
+# FIXME: installing NetworkManager-tui breaks wifi on the Fedora installer
 nmcli device wifi rescan
-sleep 4 # wait for it to show up
-nmtui connect
+nmcli device wifi list
+read -p "Enter SSID: "; SSID=$REPLY
+read -p "Enter password: "; WIFI_PASS=$REPLY
+nmcli device wifi connect $SSID password $WIFI_PASS
 
 # a fancy hack
 MMCDEV=$(ls /dev/mmcblk* | grep -F boot0 | sed 's/boot0//')
@@ -106,13 +109,6 @@ fi
 
 mount $ROOTPART /mnt
 
-mkdir -p /mnt/lib/firmware/
-cp -r /lib/firmware/* /mnt/lib/firmware/
-
-# copy modules over
-mkdir -p /mnt/lib/modules/$(uname -r)/
-cp -r /lib/modules/$(uname -r)/* /mnt/lib/modules/$(uname -r)/
-
 # copy kernel from usb pendrive/hdd to internal emmc
 dd if=/dev/zero of=$KERNPART >/dev/null 2>&1 || true
 

fs/install-to-emmc-end

@@ -2,20 +2,32 @@
 
 mount proc /mnt/proc -t proc # just in case something((gdm)) wants it
 
-echo "Enter root password:"
-until chroot /mnt passwd; do
+if [ ! "$SKIP_CD_USER_SETUP" = "1" ]; then
+
+
 	echo "Enter root password:"
-done
+	until chroot /mnt passwd; do
+		echo "Enter root password:"
+	done
 
-read -p "Enter username, no spaces or big letters: "
-chroot /mnt useradd -G sudo,video,audio,render -s /bin/bash -m $REPLY
+	read -p "Enter username, no spaces or big letters: "
+	chroot /mnt useradd -G sudo,video,audio,render -s /bin/bash -m $REPLY
 
-echo "Enter user password:"
-until chroot /mnt passwd $REPLY; do
 	echo "Enter user password:"
-done
+	until chroot /mnt passwd $REPLY; do
+		echo "Enter user password:"
+	done
+
+	export USERNAME=$REPLY
+
+fi
+
+mkdir -p /mnt/lib/firmware/
+cp -r /lib/firmware/* /mnt/lib/firmware/
 
-export USERNAME=$REPLY
+# copy modules over
+mkdir -p /mnt/lib/modules/$(uname -r)/
+cp -r /lib/modules/$(uname -r)/* /mnt/lib/modules/$(uname -r)/
 
 # default libinput config for touchpad is bad
 # let's override it
@@ -42,12 +54,12 @@ fi
 
 cp -r /CdFiles /mnt/CdFiles
 if [ $BASEBOARD = trogdor ]; then
-	chroot /mnt make -C /CdFiles/qmic clean
-	chroot /mnt make -C /CdFiles/qrtr clean
-	chroot /mnt make -C /CdFiles/rmtfs clean
-	chroot /mnt make -C /CdFiles/qmic prefix=/usr install
-	chroot /mnt make -C /CdFiles/qrtr prefix=/usr install
-	chroot /mnt make -C /CdFiles/rmtfs prefix=/usr install
+	make -C /mnt/CdFiles/qmic clean
+	make -C /mnt/CdFiles/qrtr clean
+	make -C /mnt/CdFiles/rmtfs clean
+	make -C /CdFiles/qmic prefix=/mnt/usr install
+	make -C /CdFiles/qrtr prefix=/mnt/usr install
+	make -C /CdFiles/rmtfs prefix=/mnt/usr install
 	chroot /mnt systemctl enable rmtfs
 fi
 
@@ -62,6 +74,7 @@ export INST_EMMC=1
 source ~/ui/install
 
 # copy over ucm files
+mkdir -p /mnt/usr/share/alsa/ucm2/
 cp -r /ucm/* /mnt/usr/share/alsa/ucm2/