A single board solution to combine several Original XBOX modifications OpenXenium/OGX360/BlueRetro/spi2par2019/Wireless Bridge/
(Plus additional support circuitry)
I wish to keep a level of Modular-ness to this project, allowng for each version of xbox to be able to use this.
I also wish to keep this 100% Open Source. Any and all files should and will be made avalaiable to all. So if you contribute, please be aware that your contribution shall be a part of an Open ethos.
Some Parts so far:
4 AT mega 32U4 are used for OGX360
1 AT mega 32U4 is used for spi2par2019
1 ESP32 is used for BlueRetro and communication with OGX360
1 ESP32 is used for linking all together and possible Wi-Fi?
1 Wi-Fi to Ethernet adapter (Possible use of ESP32?)
1 FPGA is used for OpenXenium
1 PCB to add all of these together.
-----------------------------------------------------
4 x ATmega 32U4 > SPI > ESP32
1 x ESP32 > Bluetooth > SPI > ATmega 32U4 x4
1 x ATmega 32U4 > SPI > FPGA
1 x FPGA > Bios-ROM > LPC
1 x WiFi > Bridge > RJ45 loop(or internal pogos)
1 x <?Focus-IC?> > <?ADV7511?>
1 board holding all chips/ICs
zif connectors with ribbon QSB points added
Ribbons to : LPC / USB 1-4 / +5V-GND / Ethernet / <?Focus-IC?>
----------------------------------------------------------------
Additions?
Xerc Wireless power On/Off?
RGB that can tie into the spi lines of the OpenXenium?
WLED?
HDMI? ( See <??> marked items )
Use as many existing internal connections as is possible.
Why?
Simple, I want to make an Ultra Slim OG-XBOX. To do this i will be removing the DVD drive, adding in a 2.5" storage solution (ide to sata adapter). Removing the front controller ports, with the combination of BlueRetro and OGX360 I will be able to use a DS4 pad or a Xinput/HID/XboxOne pad etc. As such I will have zero need for plug-in controllers.
In making the Ultra Slim I shall be trying to also provide a custom power supply with regulators etc. All Capacitors to be replaced with Solid state caps. But these won't be part of Lambda-OGX, just a cap replace.
If it is possible to tie each mod together with a custom pre environment I shall try. I know that a few solutions already exist provide a pre environment for settings / mod configuration.
Any and all help welcomed.
This is purely a project of love and learning. My first Xbox experiences were in my late teens - early 20s, i am 40 in 2024 and just purchased a 1.4 XBOX and after seeing the available mods... Wanted an easy way to tie them all together.
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
Please make sure to update tests as appropriate.