Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

coupled: add additional land outputs for prototypes #332

Closed
JessicaMeixner-NOAA opened this issue Jun 1, 2021 · 13 comments
Closed

coupled: add additional land outputs for prototypes #332

JessicaMeixner-NOAA opened this issue Jun 1, 2021 · 13 comments
Assignees
@barlage @HelinWei-NOAA
Labels
coupled Issues related to the coupled branch
Milestone
Prototype 8

Comments

@JessicaMeixner-NOAA
Copy link
Contributor

Need to add additional land outputs for prototypes, from @barlage:

  • there are three new accumulated fields we would need to fully close the land energy budget (could use at least one existing variable for these). Probably could remove a few others if adding is an issue.
  • it would be good to know which grids have fractional outputs on the gaussian grid; I believe LAND could be used for this
@JessicaMeixner-NOAA JessicaMeixner-NOAA added the coupled Issues related to the coupled branch label Jun 1, 2021
@barlage
Copy link

barlage commented Jun 16, 2021

@JessicaMeixner-NOAA: @HelinWei-NOAA and I have talked about this. You can assign the issue to us if you want.

@JessicaMeixner-NOAA JessicaMeixner-NOAA added this to the Prototype 7 milestone Jun 22, 2021
@LydiaStefanova-NOAA
Copy link

About using LAND to store the fractional land mask: there was a discussion of that a while back, and I recall there being a concern that a number of downstream users expect only 1s and 0s in that variable, and the proposed solution at that time being the introduction of a new variable to store the fractional mask. Maybe @junwang-noaa or Shan Sun (I can't find her user name here) remember more about that?

@HelinWei-NOAA
Copy link
Contributor

Five additional land fields have been added to the model native output (netcdf). If we want to have them included in the grib outputs, we need to add them to the grib table. Three of them are already in the table but with the different unit. I don't think they allow to have the same variable but with the different unit in the table. So we need to change the unit for them in the current table and make corresponding changes to the code. Also do we plan to have this change in p7c or p8? I think we can merger this change to the other PR.

@JessicaMeixner-NOAA
Copy link
Contributor Author

@HelinWei-NOAA currently the plan is to have this in P7, the mini-prototypes use the rt.sh system not the workflow, so any workflow only updates are not used in p7c and would only be used for the full prototype.

@JessicaMeixner-NOAA
Copy link
Contributor Author

FYI @shansun6

@barlage
Copy link

barlage commented Jul 7, 2021

@HelinWei-NOAA what is the plan for land fraction? I do remember what @LydiaStefanova-NOAA mentioned earlier that perhaps there are downstream users that expect LAND to be exclusively 0/1 (and the grib description of LAND kinda says that parenthetically: https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_table4-2-2-0.shtml). Do we need another new variable for true land fraction? There doesn't seem to be an appropriate GRIB variable for this either. @shansun6 @junwang-noaa

@HelinWei-NOAA
Copy link
Contributor

@JessicaMeixner-NOAA Actually most of the changes are made to ccpp-physics. The only one related to workflow is the modification to diag_table.

@HelinWei-NOAA currently the plan is to have this in P7, the mini-prototypes use the rt.sh system not the workflow, so any workflow only updates are not used in p7c and would only be used for the full prototype.

@JessicaMeixner-NOAA
Copy link
Contributor Author

Are the changes to ccpp-physics already merged?

@HelinWei-NOAA
Copy link
Contributor

HelinWei-NOAA commented Jul 7, 2021 via email

@JessicaMeixner-NOAA
Copy link
Contributor Author

@HelinWei-NOAA can you add the link to the ccpp/fv3atm/ufs issues here since this global-workflow task is dependent on those?

@HelinWei-NOAA
Copy link
Contributor

@barlage I can add land fraction to the output without using LAND. It should be very straightfoward because we have landfrac in DDT Sfcprop. The only thing we need to deal with is its grib definition.

@HelinWei-NOAA what is the plan for land fraction? I do remember what @LydiaStefanova-NOAA mentioned earlier that perhaps there are downstream users that expect LAND to be exclusively 0/1 (and the grib description of LAND kinda says that parenthetically: https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_table4-2-2-0.shtml). Do we need another new variable for true land fraction? There doesn't seem to be an appropriate GRIB variable for this either. @shansun6 @junwang-noaa

@JessicaMeixner-NOAA
Copy link
Contributor Author

Do we still need to do a test with this or did we complete this?

@HelinWei-NOAA
Copy link
Contributor

HelinWei-NOAA commented Feb 7, 2022 via email

lgannoaa pushed a commit to lgannoaa/global-workflow that referenced this issue Feb 9, 2022
@ericaligo-NOAA
Output pratemax from UPP (NOAA-EMC#332)
ce98991 
* add pratemax to xml and create new flat file for fv3lam

* pratemax in mm/hr added to initpost_netcdf.f

* switched pratemax position in file and created new flat file

* include hafs flat file for pratemax change

* change version from 10.0.7 to 10.0.8
zhanglikate pushed a commit to zhanglikate/global-workflow that referenced this issue Oct 6, 2022
@binli2337
Add 2 new tests for DATM-MOM6-CICE6 application (NOAA-EMC#332)
22c39c5 
* Add the following 2 tests: datm_restart_cfsr, datm_debug_cfsr
* Add wcoss_dell_p3.log.
* Add Hera log, Orion log, wcoss_dell_p3 log.
zhanglikate pushed a commit to zhanglikate/global-workflow that referenced this issue Oct 6, 2022
@climbfuji @pjpegion
@jiandewang @DeniseWorthen @DusanJovic-NOAA @mark-a-potts @binli2337 @dustinswales @kgerheiser @RatkoVasic-NOAA @aliabdolali @junwang-noaa @XiaqiongZhou-NOAA @mlee03 @ValeryYudin-NOAA @mdtoyNOAA @MinsukJi-NOAA
Update gsl develop from master (NOAA-EMC#63)
56e9901 
* Updates to stochastic_physics_wrapper (NOAA-EMC#280)

Fix to stochastic_physics_wrapper to allow for random patterns to update at a longer time-step than model

Co-authored-by: Dom Heinzeller <climbfuji@ymail.com>

* Update for Jet, bug fixes in running with frac_grid=T and GFDL MP, and in restarting with frac_grid=T  (NOAA-EMC#304)

Update the modulefile for jet.intel to enable UPP v10.0.0. The hpc-stack v1.0.0 pre-release is used for this. Small changes are made to tests.rt.sh for jet.intel and gaea.intel (consistency with other platforms).

The submodule pointer update for fv3atm addresses bugs in the ufs-weather-model with frac_grid=T and GFDL microphysics, and with restarting the model when frac_grid=T (from @shansun6 and @SMoorthi-emc).

* Feature/update mom6 and retain b4b results for 025x025 resolution (NOAA-EMC#290)

* point MOM6 to new branch which corresponding to GFDL 20201022 commit
* modify fms_files.cmake and mom6_files.cmake to reflect changes in MOM6 code as this version of MOM6 contains some file deletion, new files being added and renaming of files
* manually set MOM6 parameters in order to retain origonal results for 0.25x0.25 resolution
* update MOM6 to include Bugfix for mom6solo to be built
* modify compile.sh to allow mom6solo compiling
* modify MOM_input_template for all resolutions based on GFDL MOM6-example main branch update on 20201022
* change executable permissions for CMakeLists.txt
* chmod 644 to 6 files Dom pointed out
* chmod for CMakeLists.txt and tests/compile.sh
* change baseline directpory to 20201202 in rt.sh

* Update CICE, Move regression test input outside baseline directory (NOAA-EMC#270)

*Updates CICE to most recent develop branch of NOAA-EMC
* Sets n_aero (number of aerosols) in ice_in_template to 0.
* removes trailing whitespace from ice_in
* moves regression test input outside baseline directory (ufs-weather PR NOAA-EMC#312)

Co-authored-by: Dusan Jovic <48258889+DusanJovic-NOAA@users.noreply.github.com>
Co-authored-by: Dom Heinzeller <dom.heinzeller@icloud.com>

* Updates to build for JEDI linking/control, add wcoss2 (#295)

* Build on wcoss2 (acorn)
* Use -march=core-avx2 instead of -xCORE-AVX2 on wcoss2
* Updates to build for JEDI linking/control
* Removed unnecessary include files and INLINE POST setting
* Updated to address PR suggestions.
* Add rt_acorn.conf. Change /lfs/h2 to /lfs/h1.
* Update .gitmodules and submodule pointer for fv3atm for code review and testing
* regression test results
* Updated .gitmodules and removed extraneous file
* Fixed .gitmodules and updated pointer for FV3
* Updated pointer to NEMS repo
Co-authored-by: Dusan Jovic <dusan.jovic@noaa.gov>
Co-authored-by: Dom Heinzeller <climbfuji@ymail.com>

* Final-final GFS v16 updates / restart reproducibility bugfixes (NOAA-EMC#325)

* Update .gitmodules and submodule pointer for fv3atm for code review and testing
* Add GFS v16 beta restart test, update stochastics test
* Update regression test baseline date tag to 20201214; skip-ci
* tests/rt.conf: bugfix, add missing 'fv3' to new stochy tests; skip-ci
* Regression test logs for gaea.intel, hera.gnu, hera.intel, jet.intel, orion.intel; skip-ci
* Run GFS v16beta tests also on wcoss; regression test logs for wcoss; skip-ci
* Regression test logs for cheyenne.intel and cheyenne.gnu
* Revert change to .gitmodules and update submodule pointer for fv3atm

* Add optional bulk flux calculation in ufs-datm (NOAA-EMC#266)


* Update NEMS DATM and CMEPS to allow the optional bulk flux formulation; add two tests using the option
* Update top level CMakeList.txt to have compile flags for MOM6 and CICE6 identical for ufs-cpld and ufs-datm
* Add optional configuration variable to nems.configure to specify the directory where CMEPS will write restarts
* Adds cheyenne tasking variables to default_vars and sets WW3_COMP to cheyenne for platform cheyenne.intel 

*NOTE: Baselines develop-20201215 exist on all platforms, regression tests were run against exactly that baseline on all systems except cheyenne.intel. On cheyenne.intel the tests were run against 20201214, and this baseline is identical to 20201215 (as per "diff -r develop-20201214 develop-20201215").

Co-authors:
@DusanJovic-NOAA
@aerorahul
@JessicaMeixner-NOAA

skip-ci

* Add 2 new tests for DATM-MOM6-CICE6 application (NOAA-EMC#332)

* Add the following 2 tests: datm_restart_cfsr, datm_debug_cfsr
* Add wcoss_dell_p3.log.
* Add Hera log, Orion log, wcoss_dell_p3 log.

* RRTMGP and Thompson MP coupling (NOAA-EMC#323)

* Feature branch with RRTMGP and Thompson MP
* Updated FV3/ccpp-physics. Added namelist and configuration for RRTMGP RTs using GSD physics.
* Updated FV3
* Update physics in FV3
* Updated baselines in rt.sh
* Updated RT logs. Updated FV3 physics submodule pointer.
* Updated FV3 hash and .gitmodules

* Regression test log for PR NOAA-EMC#323 for jet.intel (NOAA-EMC#336)

* Update modules with hpc-stack v1.1.0 (NOAA-EMC#319)

* Update modules with hpc-stack v1.1.0
* Minor bug fixes to CCPP UGWP

Co-authored-by: Dom Heinzeller <climbfuji@ymail.com>

* Replace old regional SDF with FV3_GFS_v15_thompson_mynn (NOAA-EMC#333)

* Replace old FV3_GFS_2017_gfdlmp_regional SDF for regional tests with FV3_GFS_v15_thompson_mynn.
* Final path to IC's and new results.  Also, input.nml updated.
* Update RegressionTests_wcoss_dell_p3.log
* Update RegressionTests_wcoss_cray.log
* Update RegressionTests_hera.intel.log
* Update RegressionTests_jet.intel.log
* Update RegressionTests_orion.intel.log
* Update RegressionTests_cheyenne* logs.
* Update RegressionTests_hera.gnu.log

* Feature/ww3update (NOAA-EMC#334)

This updates the WW3 submodule pointer to point to the top of the WW3 develop branch.
The path to WW3 inputs is changed to input-data-20201201/WW3_input_data_20201207/

* Remove IPD (step 1) (NOAA-EMC#331)

Make CCPP=Y the default in tests/compile.sh. Remove CCPP=Y from tests/rt*.conf and adjust formatting.
Update submodule pointer for MOM6 to include PR NOAA-EMC#341 ("Update MOM6 to GFDL's 20201218 commit")
Add modulefiles/wcoss_cray/fv3_debug (identical to modulefiles/wcoss_cray/fv3)
Fix broken utest (see NOAA-EMC#348)

* Update the format of rt.conf (NOAA-EMC#349)

Update the format of MACHINES column in rt.conf (and other .conf files). This column can be either empty, which means a test will run on all supported machines, or start with - or + sign to exclude or include specified machines explicitly.

* Add checkpoint restarts for ufs-cpld (NOAA-EMC#342)


* Adds 3 checkpoint restart tests for the ufs-cpld model
* Drops the existing c92mx025 restart test
* Adds cheyenne.intel as tested configuration for ufs-cpld and ufs-datm
* Fixes instances of srf_data* in various fv3_conf files

* add frac grid input, update and add additional cpld tests (NOAA-EMC#354)


* Updates FV3_input_frac to add both benchmark dates and L127 files
* Adds additional tests and restart tests for coupled model
* Sets all cpld tests to use frac grid input by default
* Removes all instances of  USE_LA_LI2016=True except for benchmark+wave configurations

* Remove unnecessary SIMD instruction sets for Jet, first round of cleanup in rt.conf, initialize cld_amt to zero for regional runs (dycore) (NOAA-EMC#353)

* Reduce SIMDMULTIARCH sets from four to two in cmake/Intel.cmake
* First cleanup of regression test config tests/rt.conf
* tests/rt.sh: reduce number of build jobs on jet.intel from 10 to 5
* Remove flags -f and -s from rt.sh, remove SET logic, remove corresponding column in all rt*conf files
* Remove tests/rt_acorn.conf and run GFS v15p2 and GFS v16beta DEBUG tests on all platforms

* Implementation of CCPP timestep_init and timestep_final phases (NOAA-EMC#337)

* Update .gitmodules and submodule pointer for fv3atm for code review and testing
* Update submodule pointer for fv3atm; skip-ci
* Don't try to compile all suites in DEBUG mode on cheyenne.intel, weird bug on compute nodes; skip-ci
* Don't try to compile all suites in DEBUG mode on wcoss_cray; skip-ci
* Regression test logs for cheyenne.gnu, cheyenne.intel, gaea.intel, hera.gnu, hera.intel, jet.intel, orion.intel; skip-ci
* Don't try to compile all suites in DEBUG mode on wcoss_dell_p3; skip-ci
* Regression test logs for wcoss_cray and wcoss_dell_p3
* Revert change to .gitmodules and update submodule pointer for fv3atm

* Update CMEPS  (NOAA-EMC#345)


* Update CMEPS for recent changes, including addition of new run "post" run phases to eliminate redundant mapping, multiple ice sheet capability and ocn->land ice dynamic mapping
* Add a new test fv3_gfs_v16_RRTMGP_c192L127

Co-authored-by: Jun Wang <junwang-noaa@users.noreply.github.com>

* Remove IPD steps 3 and 5 (NOAA-EMC#357)

Reduce SIMDMULTIARCH sets from four to two in cmake/Intel.cmake
* First cleanup of regression test config tests/rt.conf
* tests/rt.sh: reduce number of build jobs on jet.intel from 10 to 5; skip-ci
* Remove flags -f and -s from rt.sh, remove SET logic, remove corresponding column in all rt*conf files
* Update usage in rt.sh, add modulefiles/jet.intel/fv3_debug; skip-ci
* CCPP is default in cmake build
* Add debug modulefiles for linux.gnu and macosx.gnu
* Update submodule pointer for fv3atm
* Change logic in CMakeLists.txt and tests/compile.sh so that 32BIT=ON automatically sets DYN32=ON; skip-ci
* Move logic to set DYN32 - depending on 32BIT setting - to fv3atm
* Remove -DCCPP=ON from tests/compile.sh; update submodule pointer for fv3atm; skip-ci

* point fv3 to EMC develop branch (NOAA-EMC#377)

* update cpl gfsv16 tests, rrtmgp fix and bug fixes in cmeps (NOAA-EMC#378)

* update CMEPS, fix character length error for gnu compile
* add Dusan's fix for rt_utils.sh
* update cpl gfsv16 tests, replace seaice_newland.grb with global_slmask.t1534.3072.1536.grb, recover input.mom6.nml.IN, update input directory, update global thread and decomp tests, update fdiag for global control
* point to Dustins rrtmgp fix branch
* update input directory

Co-authored-by: denise.worthen <Denise.Worthen@noaa.gov>
Co-authored-by: Jun Wang <junwang-noaa@users.noreply.github.com>

* Update develop from NOAA-GSL: RUC ice, MYNN sfclay, stochastic land perturbations (NOAA-EMC#386)

* Update .gitmodules and submodule pointer for fv3atm for gsl/develop branch
* RUC ice for gsl/develop (replaces NOAA-EMC#47) (NOAA-EMC#49)Implementation of RUC LSM ice model in CCPP
* Squash-merge climbfuji:rucice_gfsv16dzmin into gsl/develop
* Add kice=9 to tests/tests/fv3_ccpp_rap and tests/tests/fv3_ccpp_hrrr
* Change NEW_BASELINE directory for gsl/develop to avoid conflicts with development work on the authoritative branches
* Add KICE=9 to tests/tests/fv3_ccpp_gsd_unified_ugwp and tests/tests/fv3_ccpp_gsd_drag_suite_unified_ugwp
* Revert change to .gitmodules and update submodule pointer for fv3atm
* Update gsl/develop from develop 2020/12/08 (NOAA-EMC#50)
* Updates to stochastic_physics_wrapper (NOAA-EMC#280)
Fix to stochastic_physics_wrapper to allow for random patterns to update at a longer time-step than model
* Update for Jet, bug fixes in running with frac_grid=T and GFDL MP, and in restarting with frac_grid=T  (NOAA-EMC#304)
Update the modulefile for jet.intel to enable UPP v10.0.0. The hpc-stack v1.0.0 pre-release is used for this. Small changes are made to tests.rt.sh for jet.intel and gaea.intel (consistency with other platforms).
The submodule pointer update for fv3atm addresses bugs in the ufs-weather-model with frac_grid=T and GFDL microphysics, and with restarting the model when frac_grid=T (from @shansun6 and @SMoorthi-emc).
* Land stochastic perturbations (NOAA-EMC#57)

* dycore options to add zero-gradient BC to reconstruct interface u/v and change dz_min as input (NOAA-EMC#369)

* Update fv3atm
* update ccpp control test forecast length to 24h
* remove rename command
* Add CI related changes
* Update RT logs
* Update RT log files
* Add the gaea RT log file
* Update the point of fv3atm
* Update fv3atm
Co-authored-by: Jun Wang <junwang-noaa@users.noreply.github.com>
Co-authored-by: MinsukJi-NOAA <minsuk.ji@noaa.gov>
Co-authored-by: Jun Wang <37633869+junwang-noaa@users.noreply.github.com>

* MOM6 bugfixes, GFDL update, update CDMBGWD settings; fix for restart reproducibility (without waves) when USE_LA_LI2016=True, sign error on fprec passed to ocean, GFDL update, resolution dependent cdmbgwd settings (NOAA-EMC#379)


* implements two MOM6 bugfixes in the NUOPC MOM6 cap to allow restart reproducibility when USE_LA_LI2016=True and to change the sign of the latent heat flux associated with frozen precipitation (fprec) exported to MOM6

* updates MOM6 to include the GFDL 20210120 main branch which contains EMC's wave coupling code, alone with some minor code standardization and documentation

* updates the cdmbgwd namelist settings for FV3 standalone tests at C96 and implements resolution dependent values for ufs-cpld tests

Co-authored-by: Ali <ali.abdolali@noaa.gov>

* Remove legacy gnumake build from fv3atm and NEMS, remove legacy Python 2.7 support, rename v16beta to v16 and RT updates (NOAA-EMC#384)

* Update .gitmodules and submodule pointers for fv3atm and NEMS
* Remove Python 2.7 support from top-level CMakeLists.txt
* Reduce forecast length of test fv3_ccpp_gfs_v16_RRTMGP_c192L127 from 24h to 12h
* Rename v16beta to v16 everywhere except the public release documentation
* Bugfixes and missing changes
* Remove 'export CCPP_LIB_DIR=ccpp/lib' from all regression tests
* Update regression test baseline date tag to 20210128; skip-ci
* Update ecflow-python environment on cheyenne and jet; skip-ci

* Update CMEPS for HAFS integration; add datm and coupled-model tests on Gaea (NOAA-EMC#401)


* Add HAFS support in NOAA-EMC/CMEPS 
* Add coupled and datm tests for Gaea.intel

Co-authored-by: Jun Wang <junwang-noaa@users.noreply.github.com>
Co-authored-by: Bin Li <Bin.Li@gaea13.ncrc.gov>

* Move LSM vegetation lookup tables into CCPP, clean up RUC snow cover on ice initialization (remove IPD step 2)  (NOAA-EMC#407)

* Regression test logs for all tier=1 platforms

* updates FMS to 2020.04.01 (NOAA-EMC#392)

* updates FMS to 2020.04.01
* fixes fms_files.cmake
* removes extra horiz_interp
* Workaround for FMS 2020.04.01 for Cheyenne with GNU 9.1.0, incl. regression test log
Co-authored-by: Mikyung Lee <mlee@Orion-login-1.HPC.MsState.Edu>
Co-authored-by: Dom Heinzeller <climbfuji@ymail.com>

* add optional mesh in MOM6; add dz_min and min_seaice as configurable variables for coupled model (NOAA-EMC#399)

*Implements an optional setting in the cpld and datm nems.configure files to specify whether the MOM6 cap should use a mesh or a grid

*Adds configurable settings for min_seaice to gfs_physics_nml and dz_min to fv_core_nml.

* UGWP v0 v1 combined (NOAA-EMC#396)

- combines the changes in PRs NOAA-EMC#360 and NOAA-EMC#382
- adds three regression tests `fv3_ccpp_gfsv16_ugwpv1 `, `fv3_ccpp_gfsv16_ugwpv1_warmstart` and `fv3_ccpp_gfsv16_ugwpv1_debug`
- contains updates and bugfixes for `nc_compare.py` and the CI tests from @MinsukJi-NOAA 
- update Python3 environment on jet.intel, gaea.intel, cheyenne.{intel,gnu}
- turn off (again) test `fv3_ccpp_decomp` on jet.intel, this test didn't work in the past, but recently it "passed", because the error checking with `nc_compare.py` failed silently and we didn't notice it

Co-authored-by: valery.yudin <valery.yudin@noaa.gov>
Co-authored-by: Michael Toy <michael.toy@noaa.gov>
Co-authored-by: MinsukJi-NOAA <minsuk.ji@noaa.gov>

* Update regression tests from GFSv15+Thompson to GFSv16+Thompson, include "Add one regional regression test in DEBUG mode. (NOAA-EMC#419)" (NOAA-EMC#421)

* Add one regional regression test in DEBUG mode.
* Update .gitmodules and submodule pointer for fv3atm for code review and testing
* Update regression tests from GFSv15+Thompson to GFSv16+Thompson
* Combine several COMPILE lines in tests/rt.conf and tests/rt_gnu.conf
* Regression test log for cheyenne.{gnu,intel},gaea.intel, hera.gnu, jet.intel,hera.intel,orion.intel;wcoss_cray and wcoss_dell_p3;

Co-authored-by: Phil Pegion <38869668+pjpegion@users.noreply.github.com>
Co-authored-by: jiandewang <jiande.wang@noaa.gov>
Co-authored-by: Denise Worthen <denise.worthen@noaa.gov>
Co-authored-by: Dusan Jovic <48258889+DusanJovic-NOAA@users.noreply.github.com>
Co-authored-by: Mark Potts <33099090+mark-a-potts@users.noreply.github.com>
Co-authored-by: BinLi-NOAA <bin.li@noaa.gov>
Co-authored-by: dustinswales <dustin.swales@noaa.gov>
Co-authored-by: Kyle Gerheiser <3209794+kgerheiser@users.noreply.github.com>
Co-authored-by: RatkoVasic-NOAA <37597874+RatkoVasic-NOAA@users.noreply.github.com>
Co-authored-by: Ali.Abdolali <37336972+aliabdolali@users.noreply.github.com>
Co-authored-by: Jun Wang <junwang-noaa@users.noreply.github.com>
Co-authored-by: Jun Wang <37633869+junwang-noaa@users.noreply.github.com>
Co-authored-by: XiaqiongZhou-NOAA <48254930+XiaqiongZhou-NOAA@users.noreply.github.com>
Co-authored-by: Ali <ali.abdolali@noaa.gov>
Co-authored-by: Bin Li <Bin.Li@gaea13.ncrc.gov>
Co-authored-by: MiKyung Lee <58964324+mlee03@users.noreply.github.com>
Co-authored-by: valery.yudin <valery.yudin@noaa.gov>
Co-authored-by: Michael Toy <michael.toy@noaa.gov>
Co-authored-by: MinsukJi-NOAA <minsuk.ji@noaa.gov>
kayeekayee pushed a commit to kayeekayee/global-workflow that referenced this issue May 30, 2024
@SamuelTrahanNOAA
tracer tendency diagnostics and wrf-like per-timestep diagnostic (NOA…
e6d2c46 
…A-EMC#332)

* Add diagnostic 3D tendencies for all tracers and state variables in a 4D sparse array. Also, add WRF-style per-timestep pressure diagnostics.
* Add phys_tend "suite" which does nothing unless ldiag3d=.true.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@barlage barlage

@HelinWei-NOAA HelinWei-NOAA

Labels
coupled Issues related to the coupled branch
Projects
None yet
Milestone
Prototype 8
Development

No branches or pull requests
5 participants
@barlage @JessicaMeixner-NOAA @WalterKolczynski-NOAA @HelinWei-NOAA @LydiaStefanova-NOAA