Project description:

This project simulates a batch mixing system using a PIC16F84A microcontroller. The system can operate in three different modes, which are controlled by a selector switch. Each mode mixes different proportions of fluids A, B, and C. The system also includes a mixer, a heater, and pumps to control the flow of the fluids.

Key features:

Three mixing modes: Mode A: Mixes fluids A and B at a 1:1 ratio. Mode B: Mixes fluids A and B at a 2:1 ratio. Mode C: Mixes fluids A, B, and C at a 1:1:1 ratio. Controlled by a PIC16F84A microcontroller. Includes a mixer, a heater, and pumps. Has a start/stop button and a run/idle indicator.

Hardware components:

PIC16F84A microcontroller 10 MHz oscillator Three pumps with flow rates of 60, 45, and 90 L/min Tank with a capacity of 180 L Selector switch Mixer Heater Software:

Assembly code for the PIC16F84A microcontroller

Getting started:

Clone the repository. Install the necessary libraries. Connect the hardware components according to the schematic. Program the PIC16F84A microcontroller with the provided code. Run the program and test the different mixing modes.

• 💻   NOTE: This project has beed done with my collegue Wael JadAllah