System Energy Flow Card

Goal/Scope

Display current energy, gas, and water usage in a display that matches the official Energy Distribution card included with Home Assistant as much as possible. It will allow you to display a different Energy Distribution card compared to the energy dashboard. As such, additional features that fall outside of that scope will not be added.

Install

HACS (recommended)

You can install this custom component using HACS by adding a custom repository. HACS > Integrations > Explore & Add Repositories > System Energy Flow Card > Install this repository

Using the card

I recommend looking at the Example usage section to understand the basics to configure this card. (also) pay attention to the required options mentioned below.

Options

Card options

Name	Type	Default	Description
type	string	required	custom:system-energy-flow-card.
entities	object	required	One or more sensor entities, see entities object for additional entity options.
title	string		Shows a title at the top of the card.
dashboard_link	string		Shows a link to an Energy Dashboard. Should be a url path to location of your choice. If you wanted to link to the built-in dashboard you would enter /energy for example.
inverted_entities	string		Comma seperated list of entities that should be inverted (negative for consumption and positive for production). See example usage.
kwh_decimals	number	1	Number of decimals rounded to when kilowatts per hour are displayed.
wh_decimals	number	1	Number of decimals rounded to when watts per hour are displayed.
min_flow_rate	number	.75	Represents the fastest amount of time in seconds for a flow dot to travel from one end to the other, see flow formula.
max_flow_rate	number	6	Represents the slowest amount of time in seconds for a flow dot to travel from one end to the other, see flow formula.
watt_threshold	number	0	The number of watts to display before converting to and displaying kilowatts. Setting of 0 will always display in kilowatts.

Entities object

At least one of grid, battery, or solar is required. All entites (except battery_charge) should have a unit_of_measurement attribute of Wh(watts per hour) or kWh(kilowatts per hour).

Name	Type	Description
grid	string / object	Entity ID of a sensor supporting a single state with negative values for production and positive values for consumption or an object for split entites. Examples of both can be found below.
battery	string / object	Entity ID of a sensor supporting a single state with negative values for production and positive values for consumption or an object for split entites. Examples of both can be found below.
battery_charge	string	Entity ID providing a state with the current percentage of charge on the battery.
solar	string	Entity ID providing a state with the value of generation.
gas	string	Entity ID providing a state value of consumption
water	string	Entity ID providing a state value of consumption

Split entities

Can be use with either Grid or Battery configuration. The same unit_of_measurement rule as above applies.

Name	Type	Description
consumption	string	Entity ID providing a state value for consumption, this is required if using a split grid object.
production	string	Entity ID providing a state value for production

Example usage

Combined Entites Example

Using combined entities for grid, battery and solor that support positive state values for consumption and negative state values for production.

type: custom:system-energy-flow-card
entities:
  battery: sensor.battery_in_out
  battery_charge: sensor.battery_percent
  grid: sensor.grid_in_out
  solar: sensor.solar_out

Inverted Entities Example

Using combined entites as above but where the battery and grid entities are inverted (negative = consumption and positive = production).

type: custom:system-energy-flow-card
entities:
  battery: sensor.battery_in_out
  battery_charge: sensor.battery_percent
  grid: sensor.grid_in_out
  solar: sensor.solar_out
inverted_entities: battery, grid

Split Entites Example

Using split entities for grid and battery where each consumption and production entity state has a positive value.

type: custom:system-energy-flow-card
entities:
  battery:
    consumption: sensor.battery_out
    production: sensor.battery_in
  battery_charge: sensor.battery_percent
  grid:
    consumption: sensor.grid_out
    production: sensor.grid_in
  solar: sensor.solar_out

Flow Formula

This formula is based on the offical formula used by the Energy Distribution card.

max - (value / totalLines) * (max - min);
// max = max_flow_rate
// min = min_flow_rate
// value = line value, solar to grid for example
// totalLines = gridConsumption + solarConsumption + solarToBattery +
//   solarToGrid + batteryConsumption + batteryFromGrid + batteryToGrid

Credits

• @ulic75