Web Follower for Libre 3 returning 403 error

[ljlongwing]

Earlier this week Libre did some work on their servers and when they came back up my X-Drip stopped working. Doing some troubleshooting today I looked at the system status and the message returned is
Got exception 2: java.lang.RuntimeException: 403 Got failure response code: 403 {"data": {'minimumVersion":"4.7.0"},"status":920}
I found I was running an old version so I upgraded to the May 'latest' release, the problem did not resolve. I then upgraded to the latest nightly build, which as of this moment is 745d695-2023.06.15. This also did not resolve anything. I went into my Libre 3 App and Connected Apps and removed the follower that xDrip uses, then re-added them, then logged back into the LibreLinkUp and re-accepted the invite. Everything from the Libre side is working fine, all numbers are displaying as expected, it's only the xDrip app that's having trouble getting in.

[Navid200]

Did you see this?
#2888

[jamorham]

in xDrip try adding a space to the end of the Configuration Script web follower setting and see if this helps at all.

[ljlongwing]

I added a space after 'beonlabs' to be 'beonlabs ' and that still reports the same error as initially

[hpcolus]

webfollow for freestyle libre is not possible anymore after abbot's update to 4.7 version. The interim solution, not ideal, is to change in xDrip the hardware set up/source as libre patched, and install a linkup connect apk. It is in this application, linkup connect, where you need to enter the location (url) specific to your region, not in xDrip.

[jamorham]

@ljlongwing if you remove the space again do you still get the same status message?

[dxnxz]

@jamorham that did the trick!!! seems to work again. the "latest error" is about 10 minutes ago, right after i switched back to webfollower as a source. adding and then removing the space after beonlabs seems to have helped! since then i had 2 successful readings

[ljlongwing]

Yes, I can now confirm, on two separate phones, one of which I had to log out and back in to accept the license agreement, but on both of them, putting a space, waiting, removing the space seems to have fixed it, don't understand that, but it seems to have worked

[jamorham]

@ljlongwing doing those steps causes a full reset of the internal state.

[jeveli]

Yes this works.

[danielrealm24]

Where is Configuration Script in xdrip app? Thank you

[pkmzl]

It was loaded from https://community-script.beonlabs.net, but it is not available now.