stage-1.nix

# This module builds the initial ramdisk, which contains an init
# script that performs the first stage of booting the system: it loads
# the modules necessary to mount the root file system, then calls the
# init in the root file system to start the second boot stage.

{ config, lib, utils, pkgs, ... }:

with lib;

let

  udev = config.systemd.package;

  kernel-name = config.boot.kernelPackages.kernel.name or "kernel";

  modulesTree = config.system.modulesTree.override { name = kernel-name + "-modules"; };
  firmware = config.hardware.firmware;


  # Determine the set of modules that we need to mount the root FS.
  modulesClosure = pkgs.makeModulesClosure {
    rootModules = config.boot.initrd.availableKernelModules ++ config.boot.initrd.kernelModules;
    kernel = modulesTree;
    firmware = firmware;
    allowMissing = true;
  };


  # The initrd only has to mount `/` or any FS marked as necessary for
  # booting (such as the FS containing `/nix/store`, or an FS needed for
  # mounting `/`, like `/` on a loopback).
  fileSystems = filter utils.fsNeededForBoot config.system.build.fileSystems;

  # A utility for enumerating the shared-library dependencies of a program
  findLibs = pkgs.buildPackages.writeShellScriptBin "find-libs" ''
    set -euo pipefail

    declare -A seen
    left=()

    patchelf="${pkgs.buildPackages.patchelf}/bin/patchelf"

    function add_needed {
      rpath="$($patchelf --print-rpath $1)"
      dir="$(dirname $1)"
      for lib in $($patchelf --print-needed $1); do
        left+=("$lib" "$rpath" "$dir")
      done
    }

    add_needed "$1"

    while [ ''${#left[@]} -ne 0 ]; do
      next=''${left[0]}
      rpath=''${left[1]}
      ORIGIN=''${left[2]}
      left=("''${left[@]:3}")
      if [ -z ''${seen[$next]+x} ]; then
        seen[$next]=1

        # Ignore the dynamic linker which for some reason appears as a DT_NEEDED of glibc but isn't in glibc's RPATH.
        case "$next" in
          ld*.so.?) continue;;
        esac

        IFS=: read -ra paths <<< $rpath
        res=
        for path in "''${paths[@]}"; do
          path=$(eval "echo $path")
          if [ -f "$path/$next" ]; then
              res="$path/$next"
              echo "$res"
              add_needed "$res"
              break
          fi
        done
        if [ -z "$res" ]; then
          echo "Couldn't satisfy dependency $next" >&2
          exit 1
        fi
      fi
    done
  '';

  # Some additional utilities needed in stage 1, like mount, lvm, fsck
  # etc.  We don't want to bring in all of those packages, so we just
  # copy what we need.  Instead of using statically linked binaries,
  # we just copy what we need from Glibc and use patchelf to make it
  # work.
  extraUtils = pkgs.runCommandCC "extra-utils"
    { nativeBuildInputs = [pkgs.buildPackages.nukeReferences];
      allowedReferences = [ "out" ]; # prevent accidents like glibc being included in the initrd
    }
    ''
      set +o pipefail

      mkdir -p $out/bin $out/lib
      ln -s $out/bin $out/sbin

      copy_bin_and_libs () {
        [ -f "$out/bin/$(basename $1)" ] && rm "$out/bin/$(basename $1)"
        cp -pdv $1 $out/bin
      }

      # Copy BusyBox.
      for BIN in ${pkgs.busybox}/{s,}bin/*; do
        copy_bin_and_libs $BIN
      done

      # Copy some utillinux stuff.
      copy_bin_and_libs ${pkgs.utillinux}/sbin/blkid

      # Copy dmsetup and lvm.
      copy_bin_and_libs ${getBin pkgs.lvm2}/bin/dmsetup
      copy_bin_and_libs ${getBin pkgs.lvm2}/bin/lvm

      # Add RAID mdadm tool.
      copy_bin_and_libs ${pkgs.mdadm}/sbin/mdadm
      copy_bin_and_libs ${pkgs.mdadm}/sbin/mdmon

      # Copy udev.
      copy_bin_and_libs ${udev}/bin/udevadm
      copy_bin_and_libs ${udev}/lib/systemd/systemd-sysctl
      for BIN in ${udev}/lib/udev/*_id; do
        copy_bin_and_libs $BIN
      done
      # systemd-udevd is only a symlink to udevadm these days
      ln -sf udevadm $out/bin/systemd-udevd

      # Copy modprobe.
      copy_bin_and_libs ${pkgs.kmod}/bin/kmod
      ln -sf kmod $out/bin/modprobe

      # Copy resize2fs if any ext* filesystems are to be resized
      ${optionalString (any (fs: fs.autoResize && (lib.hasPrefix "ext" fs.fsType)) fileSystems) ''
        # We need mke2fs in the initrd.
        copy_bin_and_libs ${pkgs.e2fsprogs}/sbin/resize2fs
      ''}

      # Copy secrets if needed.
      #
      # TODO: move out to a separate script; see #85000.
      ${optionalString (!config.boot.loader.supportsInitrdSecrets)
          (concatStringsSep "\n" (mapAttrsToList (dest: source:
             let source' = if source == null then dest else source; in
               ''
                  mkdir -p $(dirname "$out/secrets/${dest}")
                  # Some programs (e.g. ssh) doesn't like secrets to be
                  # symlinks, so we use `cp -L` here to match the
                  # behaviour when secrets are natively supported.
                  cp -Lr ${source'} "$out/secrets/${dest}"
                ''
          ) config.boot.initrd.secrets))
       }

      ${config.boot.initrd.extraUtilsCommands}

      # Copy ld manually since it isn't detected correctly
      cp -pv ${pkgs.stdenv.cc.libc.out}/lib/ld*.so.? $out/lib

      # Copy all of the needed libraries
      find $out/bin $out/lib -type f | while read BIN; do
        echo "Copying libs for executable $BIN"
        for LIB in $(${findLibs}/bin/find-libs $BIN); do
          TGT="$out/lib/$(basename $LIB)"
          if [ ! -f "$TGT" ]; then
            SRC="$(readlink -e $LIB)"
            cp -pdv "$SRC" "$TGT"
          fi
        done
      done

      # Strip binaries further than normal.
      chmod -R u+w $out
      stripDirs "$STRIP" "lib bin" "-s"

      # Run patchelf to make the programs refer to the copied libraries.
      find $out/bin $out/lib -type f | while read i; do
        if ! test -L $i; then
          nuke-refs -e $out $i
        fi
      done

      find $out/bin -type f | while read i; do
        if ! test -L $i; then
          echo "patching $i..."
          patchelf --set-interpreter $out/lib/ld*.so.? --set-rpath $out/lib $i || true
        fi
      done

      if [ -z "${toString (pkgs.stdenv.hostPlatform != pkgs.stdenv.buildPlatform)}" ]; then
      # Make sure that the patchelf'ed binaries still work.
      echo "testing patched programs..."
      $out/bin/ash -c 'echo hello world' | grep "hello world"
      export LD_LIBRARY_PATH=$out/lib
      $out/bin/mount --help 2>&1 | grep -q "BusyBox"
      $out/bin/blkid -V 2>&1 | grep -q 'libblkid'
      $out/bin/udevadm --version
      $out/bin/dmsetup --version 2>&1 | tee -a log | grep -q "version:"
      LVM_SYSTEM_DIR=$out $out/bin/lvm version 2>&1 | tee -a log | grep -q "LVM"
      $out/bin/mdadm --version

      ${config.boot.initrd.extraUtilsCommandsTest}
      fi
    ''; # */


  linkUnits = pkgs.runCommand "link-units" {
      allowedReferences = [ extraUtils ];
      preferLocalBuild = true;
    } ''
      mkdir -p $out
      cp -v ${udev}/lib/systemd/network/*.link $out/
    '';

  udevRules = pkgs.runCommand "udev-rules" {
      allowedReferences = [ extraUtils ];
      preferLocalBuild = true;
    } ''
      mkdir -p $out

      echo 'ENV{LD_LIBRARY_PATH}="${extraUtils}/lib"' > $out/00-env.rules

      cp -v ${udev}/lib/udev/rules.d/60-cdrom_id.rules $out/
      cp -v ${udev}/lib/udev/rules.d/60-persistent-storage.rules $out/
      cp -v ${udev}/lib/udev/rules.d/75-net-description.rules $out/
      cp -v ${udev}/lib/udev/rules.d/80-drivers.rules $out/
      cp -v ${udev}/lib/udev/rules.d/80-net-setup-link.rules $out/
      cp -v ${pkgs.lvm2}/lib/udev/rules.d/*.rules $out/
      ${config.boot.initrd.extraUdevRulesCommands}

      for i in $out/*.rules; do
          substituteInPlace $i \
            --replace ata_id ${extraUtils}/bin/ata_id \
            --replace scsi_id ${extraUtils}/bin/scsi_id \
            --replace cdrom_id ${extraUtils}/bin/cdrom_id \
            --replace ${pkgs.coreutils}/bin/basename ${extraUtils}/bin/basename \
            --replace ${pkgs.utillinux}/bin/blkid ${extraUtils}/bin/blkid \
            --replace ${getBin pkgs.lvm2}/bin ${extraUtils}/bin \
            --replace ${pkgs.mdadm}/sbin ${extraUtils}/sbin \
            --replace ${pkgs.bash}/bin/sh ${extraUtils}/bin/sh \
            --replace ${udev} ${extraUtils}
      done

      # Work around a bug in QEMU, which doesn't implement the "READ
      # DISC INFORMATION" SCSI command:
      #   https://bugzilla.redhat.com/show_bug.cgi?id=609049
      # As a result, `cdrom_id' doesn't print
      # ID_CDROM_MEDIA_TRACK_COUNT_DATA, which in turn prevents the
      # /dev/disk/by-label symlinks from being created.  We need these
      # in the NixOS installation CD, so use ID_CDROM_MEDIA in the
      # corresponding udev rules for now.  This was the behaviour in
      # udev <= 154.  See also
      #   http://www.spinics.net/lists/hotplug/msg03935.html
      substituteInPlace $out/60-persistent-storage.rules \
        --replace ID_CDROM_MEDIA_TRACK_COUNT_DATA ID_CDROM_MEDIA
    ''; # */


  # The init script of boot stage 1 (loading kernel modules for
  # mounting the root FS).
  bootStage1 = pkgs.substituteAll {
    src = ./stage-1-init.sh;

    shell = "${extraUtils}/bin/ash";

    isExecutable = true;

    postInstall = ''
      echo checking syntax
      # check both with bash
      ${pkgs.buildPackages.bash}/bin/sh -n $target
      # and with ash shell, just in case
      ${pkgs.buildPackages.busybox}/bin/ash -n $target
    '';

    inherit linkUnits udevRules extraUtils modulesClosure;

    inherit (config.boot) resumeDevice;

    inherit (config.system.build) earlyMountScript;

    inherit (config.boot.initrd) checkJournalingFS
      preLVMCommands preDeviceCommands postDeviceCommands postMountCommands preFailCommands kernelModules;

    resumeDevices = map (sd: if sd ? device then sd.device else "/dev/disk/by-label/${sd.label}")
                    (filter (sd: hasPrefix "/dev/" sd.device && !sd.randomEncryption.enable
                             # Don't include zram devices
                             && !(hasPrefix "/dev/zram" sd.device)
                            ) config.swapDevices);

    fsInfo =
      let f = fs: [ fs.mountPoint (if fs.device != null then fs.device else "/dev/disk/by-label/${fs.label}") fs.fsType (builtins.concatStringsSep "," fs.options) ];
      in pkgs.writeText "initrd-fsinfo" (concatStringsSep "\n" (concatMap f fileSystems));

    setHostId = optionalString (config.networking.hostId != null) ''
      hi="${config.networking.hostId}"
      ${if pkgs.stdenv.isBigEndian then ''
        echo -ne "\x''${hi:0:2}\x''${hi:2:2}\x''${hi:4:2}\x''${hi:6:2}" > /etc/hostid
      '' else ''
        echo -ne "\x''${hi:6:2}\x''${hi:4:2}\x''${hi:2:2}\x''${hi:0:2}" > /etc/hostid
      ''}
    '';
  };


  # The closure of the init script of boot stage 1 is what we put in
  # the initial RAM disk.
  initialRamdisk = pkgs.makeInitrd {
    name = "initrd-${kernel-name}";
    inherit (config.boot.initrd) compressor prepend;

    contents =
      [ { object = bootStage1;
          symlink = "/init";
        }
        { object = pkgs.writeText "mdadm.conf" config.boot.initrd.mdadmConf;
          symlink = "/etc/mdadm.conf";
        }
        { object = pkgs.runCommand "initrd-kmod-blacklist-ubuntu" {
              src = "${pkgs.kmod-blacklist-ubuntu}/modprobe.conf";
              preferLocalBuild = true;
            } ''
              target=$out
              ${pkgs.buildPackages.perl}/bin/perl -0pe 's/## file: iwlwifi.conf(.+?)##/##/s;' $src > $out
            '';
          symlink = "/etc/modprobe.d/ubuntu.conf";
        }
        { object = pkgs.kmod-debian-aliases;
          symlink = "/etc/modprobe.d/debian.conf";
        }
      ];
  };

  # Script to add secret files to the initrd at bootloader update time
  initialRamdiskSecretAppender =
    pkgs.writeScriptBin "append-initrd-secrets"
      ''
        #!${pkgs.bash}/bin/bash -e
        function usage {
          echo "USAGE: $0 INITRD_FILE" >&2
          echo "Appends this configuration's secrets to INITRD_FILE" >&2
        }

        if [ $# -ne 1 ]; then
          usage
          exit 1
        fi

        if [ "$1"x = "--helpx" ]; then
          usage
          exit 0
        fi

        ${lib.optionalString (config.boot.initrd.secrets == {})
            "exit 0"}

        export PATH=${pkgs.coreutils}/bin:${pkgs.cpio}/bin:${pkgs.gzip}/bin:${pkgs.findutils}/bin

        function cleanup {
          if [ -n "$tmp" -a -d "$tmp" ]; then
            rm -fR "$tmp"
          fi
        }
        trap cleanup EXIT

        tmp=$(mktemp -d initrd-secrets.XXXXXXXXXX)

        ${lib.concatStringsSep "\n" (mapAttrsToList (dest: source:
            let source' = if source == null then dest else toString source; in
              ''
                mkdir -p $(dirname "$tmp/${dest}")
                cp -a ${source'} "$tmp/${dest}"
              ''
          ) config.boot.initrd.secrets)
         }

        (cd "$tmp" && find . -print0 | sort -z | cpio -o -H newc -R +0:+0 --reproducible --null) | \
          ${config.boot.initrd.compressor} >> "$1"
      '';

in

{
  options = {

    boot.resumeDevice = mkOption {
      type = types.str;
      default = "";
      example = "/dev/sda3";
      description = ''
        Device for manual resume attempt during boot. This should be used primarily
        if you want to resume from file. If left empty, the swap partitions are used.
        Specify here the device where the file resides.
        You should also use <varname>boot.kernelParams</varname> to specify
        <literal><replaceable>resume_offset</replaceable></literal>.
      '';
    };

    boot.initrd.enable = mkOption {
      type = types.bool;
      default = !config.boot.isContainer;
      defaultText = "!config.boot.isContainer";
      description = ''
        Whether to enable the NixOS initial RAM disk (initrd). This may be
        needed to perform some initialisation tasks (like mounting
        network/encrypted file systems) before continuing the boot process.
      '';
    };

    boot.initrd.prepend = mkOption {
      default = [ ];
      type = types.listOf types.str;
      description = ''
        Other initrd files to prepend to the final initrd we are building.
      '';
    };

    boot.initrd.checkJournalingFS = mkOption {
      default = true;
      type = types.bool;
      description = ''
        Whether to run <command>fsck</command> on journaling filesystems such as ext3.
      '';
    };

    boot.initrd.mdadmConf = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Contents of <filename>/etc/mdadm.conf</filename> in stage 1.
      '';
    };

    boot.initrd.preLVMCommands = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed immediately before LVM discovery.
      '';
    };

    boot.initrd.preDeviceCommands = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed before udev is started to create
        device nodes.
      '';
    };

    boot.initrd.postDeviceCommands = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed immediately after stage 1 of the
        boot has loaded kernel modules and created device nodes in
        <filename>/dev</filename>.
      '';
    };

    boot.initrd.postMountCommands = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed immediately after the stage 1
        filesystems have been mounted.
      '';
    };

    boot.initrd.preFailCommands = mkOption {
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed before the failure prompt is shown.
      '';
    };

    boot.initrd.extraUtilsCommands = mkOption {
      internal = true;
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed in the builder of the
        extra-utils derivation.  This can be used to provide
        additional utilities in the initial ramdisk.
      '';
    };

    boot.initrd.extraUtilsCommandsTest = mkOption {
      internal = true;
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed in the builder of the
        extra-utils derivation after patchelf has done its
        job.  This can be used to test additional utilities
        copied in extraUtilsCommands.
      '';
    };

    boot.initrd.extraUdevRulesCommands = mkOption {
      internal = true;
      default = "";
      type = types.lines;
      description = ''
        Shell commands to be executed in the builder of the
        udev-rules derivation.  This can be used to add
        additional udev rules in the initial ramdisk.
      '';
    };

    boot.initrd.compressor = mkOption {
      internal = true;
      default = "gzip -9n";
      type = types.str;
      description = "The compressor to use on the initrd image.";
      example = "xz";
    };

    boot.initrd.secrets = mkOption
      { default = {};
        type = types.attrsOf (types.nullOr types.path);
        description =
          ''
            Secrets to append to the initrd. The attribute name is the
            path the secret should have inside the initrd, the value
            is the path it should be copied from (or null for the same
            path inside and out).
          '';
        example = literalExample
          ''
            { "/etc/dropbear/dropbear_rsa_host_key" =
                ./secret-dropbear-key;
            }
          '';
      };

    boot.initrd.supportedFilesystems = mkOption {
      default = [ ];
      example = [ "btrfs" ];
      type = types.listOf types.str;
      description = "Names of supported filesystem types in the initial ramdisk.";
    };

    boot.loader.supportsInitrdSecrets = mkOption
      { internal = true;
        default = false;
        type = types.bool;
        description =
          ''
            Whether the bootloader setup runs append-initrd-secrets.
            If not, any needed secrets must be copied into the initrd
            and thus added to the store.
          '';
      };

    fileSystems = mkOption {
      type = with lib.types; attrsOf (submodule {
        options.neededForBoot = mkOption {
          default = false;
          type = types.bool;
          description = ''
            If set, this file system will be mounted in the initial ramdisk.
            Note that the file system will always be mounted in the initial
            ramdisk if its mount point is one of the following:
            ${concatStringsSep ", " (
              forEach utils.pathsNeededForBoot (i: "<filename>${i}</filename>")
            )}.
          '';
        };
      });
    };

  };

  config = mkIf config.boot.initrd.enable {
    assertions = [
      { assertion = any (fs: fs.mountPoint == "/") fileSystems;
        message = "The ‘fileSystems’ option does not specify your root file system.";
      }
      { assertion = let inherit (config.boot) resumeDevice; in
          resumeDevice == "" || builtins.substring 0 1 resumeDevice == "/";
        message = "boot.resumeDevice has to be an absolute path."
          + " Old \"x:y\" style is no longer supported.";
      }
      # TODO: remove when #85000 is fixed
      { assertion = !config.boot.loader.supportsInitrdSecrets ->
          all (source:
            builtins.isPath source ||
            (builtins.isString source && hasPrefix builtins.storeDir source))
          (attrValues config.boot.initrd.secrets);
        message = ''
          boot.loader.initrd.secrets values must be unquoted paths when
          using a bootloader that doesn't natively support initrd
          secrets, e.g.:

            boot.initrd.secrets = {
              "/etc/secret" = /path/to/secret;
            };

          Note that this will result in all secrets being stored
          world-readable in the Nix store!
        '';
      }
    ];

    system.build =
      { inherit bootStage1 initialRamdisk initialRamdiskSecretAppender extraUtils; };

    system.requiredKernelConfig = with config.lib.kernelConfig; [
      (isYes "TMPFS")
      (isYes "BLK_DEV_INITRD")
    ];

    boot.initrd.supportedFilesystems = map (fs: fs.fsType) fileSystems;

  };
}