filesystems.nix

{ config, lib, pkgs, utils, ... }:

with lib;
with utils;

let

  addCheckDesc = desc: elemType: check: types.addCheck elemType check
    // { description = "${elemType.description} (with check: ${desc})"; };

  isNonEmpty = s: (builtins.match "[ \t\n]*" s) == null;
  nonEmptyStr = addCheckDesc "non-empty" types.str isNonEmpty;

  fileSystems' = toposort fsBefore (attrValues config.fileSystems);

  fileSystems = if fileSystems' ? result
                then # use topologically sorted fileSystems everywhere
                     fileSystems'.result
                else # the assertion below will catch this,
                     # but we fall back to the original order
                     # anyway so that other modules could check
                     # their assertions too
                     (attrValues config.fileSystems);

  specialFSTypes = [ "proc" "sysfs" "tmpfs" "ramfs" "devtmpfs" "devpts" ];

  nonEmptyWithoutTrailingSlash = addCheckDesc "non-empty without trailing slash" types.str
    (s: isNonEmpty s && (builtins.match ".+/" s) == null);

  coreFileSystemOpts = { name, config, ... }: {

    options = {
      mountPoint = mkOption {
        example = "/mnt/usb";
        type = nonEmptyWithoutTrailingSlash;
        description = "Location of the mounted file system.";
      };

      stratis.poolUuid = lib.mkOption {
        type = types.uniq (types.nullOr types.str);
        description = ''
          UUID of the stratis pool that the fs is located in
        '';
        example = "04c68063-90a5-4235-b9dd-6180098a20d9";
        default = null;
      };

      device = mkOption {
        default = null;
        example = "/dev/sda";
        type = types.nullOr nonEmptyStr;
        description = "Location of the device.";
      };

      fsType = mkOption {
        default = "auto";
        example = "ext3";
        type = nonEmptyStr;
        description = "Type of the file system.";
      };

      options = mkOption {
        default = [ "defaults" ];
        example = [ "data=journal" ];
        description = "Options used to mount the file system.";
        type = types.nonEmptyListOf nonEmptyStr;
      };

      depends = mkOption {
        default = [ ];
        example = [ "/persist" ];
        type = types.listOf nonEmptyWithoutTrailingSlash;
        description = ''
          List of paths that should be mounted before this one. This filesystem's
          {option}`device` and {option}`mountPoint` are always
          checked and do not need to be included explicitly. If a path is added
          to this list, any other filesystem whose mount point is a parent of
          the path will be mounted before this filesystem. The paths do not need
          to actually be the {option}`mountPoint` of some other filesystem.
        '';
      };

    };

    config = {
      mountPoint = mkDefault name;
      device = mkIf (elem config.fsType specialFSTypes) (mkDefault config.fsType);
    };

  };

  fileSystemOpts = { config, ... }: {

    options = {

      label = mkOption {
        default = null;
        example = "root-partition";
        type = types.nullOr nonEmptyStr;
        description = "Label of the device (if any).";
      };

      autoFormat = mkOption {
        default = false;
        type = types.bool;
        description = ''
          If the device does not currently contain a filesystem (as
          determined by {command}`blkid`), then automatically
          format it with the filesystem type specified in
          {option}`fsType`.  Use with caution.
        '';
      };

      formatOptions = mkOption {
        visible = false;
        type = types.unspecified;
        default = null;
      };

      autoResize = mkOption {
        default = false;
        type = types.bool;
        description = ''
          If set, the filesystem is grown to its maximum size before
          being mounted. (This is typically the size of the containing
          partition.) This is currently only supported for ext2/3/4
          filesystems that are mounted during early boot.
        '';
      };

      noCheck = mkOption {
        default = false;
        type = types.bool;
        description = "Disable running fsck on this filesystem.";
      };

    };

    config.options = mkMerge [
      (mkIf config.autoResize [ "x-systemd.growfs" ])
      (mkIf config.autoFormat [ "x-systemd.makefs" ])
      (mkIf (utils.fsNeededForBoot config) [ "x-initrd.mount" ])
    ];

  };

  # Makes sequence of `specialMount device mountPoint options fsType` commands.
  # `systemMount` should be defined in the sourcing script.
  makeSpecialMounts = mounts:
    pkgs.writeText "mounts.sh" (concatMapStringsSep "\n" (mount: ''
      specialMount "${mount.device}" "${mount.mountPoint}" "${concatStringsSep "," mount.options}" "${mount.fsType}"
    '') mounts);

  makeFstabEntries =
    let
      fsToSkipCheck = [
        "none"
        "auto"
        "overlay"
        "iso9660"
        "bindfs"
        "udf"
        "btrfs"
        "zfs"
        "tmpfs"
        "bcachefs"
        "nfs"
        "nfs4"
        "nilfs2"
        "vboxsf"
        "squashfs"
        "glusterfs"
        "apfs"
        "9p"
        "cifs"
        "prl_fs"
        "vmhgfs"
      ] ++ lib.optionals (!config.boot.initrd.checkJournalingFS) [
        "ext3"
        "ext4"
        "reiserfs"
        "xfs"
        "jfs"
        "f2fs"
      ];
      isBindMount = fs: builtins.elem "bind" fs.options;
      skipCheck = fs: fs.noCheck || fs.device == "none" || builtins.elem fs.fsType fsToSkipCheck || isBindMount fs;
      # https://wiki.archlinux.org/index.php/fstab#Filepath_spaces
      escape = string: builtins.replaceStrings [ " " "\t" ] [ "\\040" "\\011" ] string;
    in fstabFileSystems: { }: concatMapStrings (fs:
      (if fs.device != null then escape fs.device
         else if fs.label != null then "/dev/disk/by-label/${escape fs.label}"
         else throw "No device specified for mount point ‘${fs.mountPoint}’.")
      + " " + escape fs.mountPoint
      + " " + fs.fsType
      + " " + escape (builtins.concatStringsSep "," fs.options)
      + " 0 " + (if skipCheck fs then "0" else if fs.mountPoint == "/" then "1" else "2")
      + "\n"
    ) fstabFileSystems;

    initrdFstab = pkgs.writeText "initrd-fstab" (makeFstabEntries (filter utils.fsNeededForBoot fileSystems) { });

in

{

  ###### interface

  options = {

    fileSystems = mkOption {
      default = {};
      example = literalExpression ''
        {
          "/".device = "/dev/hda1";
          "/data" = {
            device = "/dev/hda2";
            fsType = "ext3";
            options = [ "data=journal" ];
          };
          "/bigdisk".label = "bigdisk";
        }
      '';
      type = types.attrsOf (types.submodule [coreFileSystemOpts fileSystemOpts]);
      description = ''
        The file systems to be mounted.  It must include an entry for
        the root directory (`mountPoint = "/"`).  Each
        entry in the list is an attribute set with the following fields:
        `mountPoint`, `device`,
        `fsType` (a file system type recognised by
        {command}`mount`; defaults to
        `"auto"`), and `options`
        (the mount options passed to {command}`mount` using the
        {option}`-o` flag; defaults to `[ "defaults" ]`).

        Instead of specifying `device`, you can also
        specify a volume label (`label`) for file
        systems that support it, such as ext2/ext3 (see {command}`mke2fs -L`).
      '';
    };

    system.fsPackages = mkOption {
      internal = true;
      default = [ ];
      description = "Packages supplying file system mounters and checkers.";
    };

    boot.supportedFilesystems = mkOption {
      default = { };
      example = lib.literalExpression ''
        {
          btrfs = true;
          zfs = lib.mkForce false;
        }
      '';
      type = types.coercedTo
        (types.listOf types.str)
        (enabled: lib.listToAttrs (map (fs: lib.nameValuePair fs true) enabled))
        (types.attrsOf types.bool);
      description = ''
        Names of supported filesystem types, or an attribute set of file system types
        and their state. The set form may be used together with `lib.mkForce` to
        explicitly disable support for specific filesystems, e.g. to disable ZFS
        with an unsupported kernel.
      '';
    };

    boot.specialFileSystems = mkOption {
      default = {};
      type = types.attrsOf (types.submodule coreFileSystemOpts);
      internal = true;
      description = ''
        Special filesystems that are mounted very early during boot.
      '';
    };

    boot.devSize = mkOption {
      default = "5%";
      example = "32m";
      type = types.str;
      description = ''
        Size limit for the /dev tmpfs. Look at mount(8), tmpfs size option,
        for the accepted syntax.
      '';
    };

    boot.devShmSize = mkOption {
      default = "50%";
      example = "256m";
      type = types.str;
      description = ''
        Size limit for the /dev/shm tmpfs. Look at mount(8), tmpfs size option,
        for the accepted syntax.
      '';
    };

    boot.runSize = mkOption {
      default = "25%";
      example = "256m";
      type = types.str;
      description = ''
        Size limit for the /run tmpfs. Look at mount(8), tmpfs size option,
        for the accepted syntax.
      '';
    };
  };


  ###### implementation

  config = {

    assertions = let
      ls = sep: concatMapStringsSep sep (x: x.mountPoint);
      resizableFSes = [
        "ext3"
        "ext4"
        "btrfs"
        "xfs"
      ];
      notAutoResizable = fs: fs.autoResize && !(builtins.elem fs.fsType resizableFSes);
    in [
      { assertion = ! (fileSystems' ? cycle);
        message = "The ‘fileSystems’ option can't be topologically sorted: mountpoint dependency path ${ls " -> " fileSystems'.cycle} loops to ${ls ", " fileSystems'.loops}";
      }
      { assertion = ! (any notAutoResizable fileSystems);
        message = let
          fs = head (filter notAutoResizable fileSystems);
        in ''
          Mountpoint '${fs.mountPoint}': 'autoResize = true' is not supported for 'fsType = "${fs.fsType}"'
          ${optionalString (fs.fsType == "auto") "fsType has to be explicitly set and"}
          only the following support it: ${lib.concatStringsSep ", " resizableFSes}.
        '';
      }
      {
        assertion = ! (any (fs: fs.formatOptions != null) fileSystems);
        message = let
          fs = head (filter (fs: fs.formatOptions != null) fileSystems);
        in ''
          'fileSystems.<name>.formatOptions' has been removed, since
          systemd-makefs does not support any way to provide formatting
          options.
        '';
      }
    ];

    # Export for use in other modules
    system.build.fileSystems = fileSystems;
    system.build.earlyMountScript = makeSpecialMounts (toposort fsBefore (attrValues config.boot.specialFileSystems)).result;

    boot.supportedFilesystems = map (fs: fs.fsType) fileSystems;

    # Add the mount helpers to the system path so that `mount' can find them.
    system.fsPackages = [ pkgs.dosfstools ];

    environment.systemPackages = with pkgs; [ fuse3 fuse ] ++ config.system.fsPackages;

    environment.etc.fstab.text =
      let
        swapOptions = sw: concatStringsSep "," (
          sw.options
          ++ optional (sw.priority != null) "pri=${toString sw.priority}"
          ++ optional (sw.discardPolicy != null) "discard${optionalString (sw.discardPolicy != "both") "=${toString sw.discardPolicy}"}"
        );
      in ''
        # This is a generated file.  Do not edit!
        #
        # To make changes, edit the fileSystems and swapDevices NixOS options
        # in your /etc/nixos/configuration.nix file.
        #
        # <file system> <mount point>   <type>  <options>       <dump>  <pass>

        # Filesystems.
        ${makeFstabEntries fileSystems {}}

        # Swap devices.
        ${flip concatMapStrings config.swapDevices (sw:
            "${sw.realDevice} none swap ${swapOptions sw}\n"
        )}
      '';

    boot.initrd.systemd.storePaths = [initrdFstab];
    boot.initrd.systemd.managerEnvironment.SYSTEMD_SYSROOT_FSTAB = initrdFstab;
    boot.initrd.systemd.services.initrd-parse-etc.environment.SYSTEMD_SYSROOT_FSTAB = initrdFstab;

    # Provide a target that pulls in all filesystems.
    systemd.targets.fs =
      { description = "All File Systems";
        wants = [ "local-fs.target" "remote-fs.target" ];
      };

    systemd.services = {
    # Mount /sys/fs/pstore for evacuating panic logs and crashdumps from persistent storage onto the disk using systemd-pstore.
    # This cannot be done with the other special filesystems because the pstore module (which creates the mount point) is not loaded then.
        "mount-pstore" = {
          serviceConfig = {
            Type = "oneshot";
            # skip on kernels without the pstore module
            ExecCondition = "${pkgs.kmod}/bin/modprobe -b pstore";
            ExecStart = pkgs.writeShellScript "mount-pstore.sh" ''
              set -eu
              # if the pstore module is builtin it will have mounted the persistent store automatically. it may also be already mounted for other reasons.
              ${pkgs.util-linux}/bin/mountpoint -q /sys/fs/pstore || ${pkgs.util-linux}/bin/mount -t pstore -o nosuid,noexec,nodev pstore /sys/fs/pstore
              # wait up to 1.5 seconds for the backend to be registered and the files to appear. a systemd path unit cannot detect this happening; and succeeding after a restart would not start dependent units.
              TRIES=15
              while [ "$(cat /sys/module/pstore/parameters/backend)" = "(null)" ]; do
                if (( $TRIES )); then
                  sleep 0.1
                  TRIES=$((TRIES-1))
                else
                  echo "Persistent Storage backend was not registered in time." >&2
                  break
                fi
              done
            '';
            RemainAfterExit = true;
          };
          unitConfig = {
            ConditionVirtualization = "!container";
            DefaultDependencies = false; # needed to prevent a cycle
          };
          before = [ "systemd-pstore.service" "shutdown.target" ];
          conflicts = [ "shutdown.target" ];
          wantedBy = [ "systemd-pstore.service" ];
        };
      };

    systemd.tmpfiles.rules = [
      "d /run/keys 0750 root ${toString config.ids.gids.keys}"
      "z /run/keys 0750 root ${toString config.ids.gids.keys}"
    ];

    # Sync mount options with systemd's src/core/mount-setup.c: mount_table.
    boot.specialFileSystems = {
      "/proc" = { fsType = "proc"; options = [ "nosuid" "noexec" "nodev" ]; };
      "/run" = { fsType = "tmpfs"; options = [ "nosuid" "nodev" "strictatime" "mode=755" "size=${config.boot.runSize}" ]; };
      "/dev" = { fsType = "devtmpfs"; options = [ "nosuid" "strictatime" "mode=755" "size=${config.boot.devSize}" ]; };
      "/dev/shm" = { fsType = "tmpfs"; options = [ "nosuid" "nodev" "strictatime" "mode=1777" "size=${config.boot.devShmSize}" ]; };
      "/dev/pts" = { fsType = "devpts"; options = [ "nosuid" "noexec" "mode=620" "ptmxmode=0666" "gid=${toString config.ids.gids.tty}" ]; };

      # To hold secrets that shouldn't be written to disk
      "/run/keys" = { fsType = "ramfs"; options = [ "nosuid" "nodev" "mode=750" ]; };
    } // optionalAttrs (!config.boot.isContainer) {
      # systemd-nspawn populates /sys by itself, and remounting it causes all
      # kinds of weird issues (most noticeably, waiting for host disk device
      # nodes).
      "/sys" = { fsType = "sysfs"; options = [ "nosuid" "noexec" "nodev" ]; };
    };

  };

}