CUBOX-I: CEC stopped working after r19022-g20d7d32

[pieska]

CEC works fine with r19022, snapshots after this one don'nt work any longer:

xbmc.log:
18:00:46 T:1984933888 NOTICE: Register - new cec device registered on cec->i.MX: CEC Adapter (0471
:1001)
18:00:46 T:1963979856 NOTICE: Thread CECAdapter start, auto delete: false
18:00:46 T:1954542672 NOTICE: Thread PeripBusCEC start, auto delete: false
18:00:46 T:1963979856 ERROR: CecLogMessage - Write: sent command error !
18:00:46 T:1963979856 ERROR: Previous line repeats 3 times.
18:00:46 T:1963979856 ERROR: CecLogMessage - RegisterLogicalAddress: HDMICEC_IOC_SETLOGICALADDRES
S failed !
18:00:46 T:1963979856 ERROR: CecLogMessage - Write: sent command error !
18:00:46 T:1918891088 ERROR: Previous line repeats 5 times.
18:00:46 T:1918891088 NOTICE: Thread CECAdapterUpdate start, auto delete: false
18:00:46 T:1918891088 ERROR: CecLogMessage - Write: sent command error !
18:00:46 T:1908405328 ERROR: Previous line repeats 5 times.

cec-client -l

ERROR: [ 58] could not open a connection (try 1)
ERROR: [ 1058] could not open a connection (try 2)
ERROR: [ 2061] could not open a connection (try 3)
ERROR: [ 3063] could not open a connection (try 4)
ERROR: [ 4064] could not open a connection (try 5)
ERROR: [ 5065] could not open a connection (try 6)
ERROR: [ 6065] could not open a connection (try 7)
ERROR: [ 7066] could not open a connection (try 8)
ERROR: [ 8066] could not open a connection (try 9)
ERROR: [ 9067] could not open a connection (try 10)
Found devices: 1

device: 1
com port: i.MX
vendor id: 0471
product id: 1001
firmware version: 65535

cec-client

No device type given. Using 'recording device'
CEC Parser created - libCEC version 2.1.4
no serial port given. trying autodetect:
path: /dev/mxc_hdmi_cec
com port: i.MX

opening a connection to the CEC adapter...
DEBUG: [ 58] unregistering all CEC clients
DEBUG: [ 59] Broadcast (F): osd name set to 'Broadcast'
ERROR: [ 59] could not open a connection (try 1)
ERROR: [ 1059] could not open a connection (try 2)
ERROR: [ 2060] could not open a connection (try 3)
ERROR: [ 3060] could not open a connection (try 4)
ERROR: [ 4061] could not open a connection (try 5)
ERROR: [ 5061] could not open a connection (try 6)
ERROR: [ 6064] could not open a connection (try 7)
ERROR: [ 7067] could not open a connection (try 8)
ERROR: [ 8069] could not open a connection (try 9)
ERROR: [ 9070] could not open a connection (try 10)
NOTICE: [ 10072] connection opened
ERROR: [ 10072] could not start CEC communications
unable to open the device on port i.MX

Known issue or is my SONY desupported ;-)

[sraue]

known issue, at least i noticed yesterday byself. if you restart xbmc after 1-2 min via ´´´systemctl restart xbmc´´´ it will work, please report at https://github.com/linux4kix/linux-linaro-stable-mx6/issues

[Nevnaur]

Hi guys

I tried to use the “systemctl restart xbmc” after 5 minutes but the CEC cannot Works in the TV SAMSUNG UE46D6500 with the OpenElec image OpenELEC-Cuboxi.arm-devel-20140827164907-r19125-gc5dd288.img.gz.

I upgraded a new SD card to the new image OpenELEC-Cuboxi.arm-devel-20140829063119-r19134-g3a70ef5.img.gz but the problem is the same, of course I tried too use “systemctl restart xbmc” after 5 minutes of the system boot but the problem is the same.

I think we have some bugs in this CEC module of OpenElec Alpha 4, because with the Alpha 1 OpenELEC_Helix-Cuboxi.arm-devel-20140711235128-r18724-g357c9d3.img.gz of OpenElec all works perfectly in the same TV.

I hope it helps.

Cheers

[Nevnaur]

Hi guys

I upgraded a SD card to the new image OpenELEC-Cuboxi.arm-devel-20140903072728-r19162-gee772f5.img.gz but the problem is the same, of course I tried too use “systemctl restart xbmc” after 5 minutes of the system boot but the problem is the same.

I hope it helps.

[pieska]

CEC is working again in OpenELEC-Cuboxi.arm-devel-20140904012447-r19177-gd405945.

[Nevnaur]

Hi guys

I upgraded my SD card to the new image OpenELEC-Cuboxi.arm-devel-20140904012447-r19177-gd405945.img.gz and the problem with CEC works fine now ;D

I detect a little issue, the sound by default with this image is configured with a “imx-spdif Analog” and any user who wont to use HDMI to video and audio of Cubox-i need to change the config to “imx-hdmi-soc HDMI”, but it is very easy to any OpenElec user.

Thanks a lot guys!!