Skip to content

7.1.3
Compare
Choose a tag to compare
@chris1howell chris1howell released this 15 Apr 19:39
· 773 commits to stable since this release
7.1.3
34ea209
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Stable Release - Rollup of changes from Lincomatic Development branch

202100311 SCL V7.1.3

  • flip polarity of V5.5 hardware detection .. HIGH = V5.5+

202100208 SCL V7.1.2

  • fix spontaneous reboot caused by PR#134 RAPI_BTN code
    -> when button disabled, didn't pat the watchdog before m_Btn.read()
  • change space character for $FP from 0x01 to 0xef so that it doesn't clash
    with custom characters

20210111 SCL V7.1.1

  • added ECVF_TIME_LIMIT, ECVF_CHARGE_LIMIT
  • move ECVF_AMMETER_CAL to 0x8000
  • revamp RapiSendEvseState()
    • send if ECVF_CHANGED_TEST bits change
    • don't send if currently inside a RAPI command, send it after command is completed
  • $FP changes
    • allow spaces in strings: if 0x01 encountered in a string, print as ' ' on LCD - ignore print request when InHardFault()

20210105 SCL V7.1.0

  • merge PRs from jeremypoulter & toofishes
    • Avoid using floating point in heartbeat code
    • Compile & Platform IO fixes
    • Added eventing of button presses RAPI $AN
    • re-enable RAPI_WF by default

20201209 toofishes

  • various code size optimizations for a smaller binary
  • recode energy meter usage calculation for better accuracy using integer math
  • remove Time.h and Time.cpp libraries, not needed as we track time in other ways
  • remove SERIALCLI, it hasn't been maintained in years and is replaced by RAPI
  • avoid using floating point in heartbeat code to save 600+ bytes of Flash

20201001 SCL

  • move MV_FOR_xx from EnergyMeter.h to openevse.h, and outside of KWH_RECORDING
    to fix compile error when KWH_RECORDING not defined

20200816 SCL V7.0.2

  • get rid of LoadThresholds()/g_DefaultThreshData to save space
    -> fixes a bug that crept in to DoPost() when I changed hardcoded value to
    if (reading >= m_ThreshData.m_ThreshAB) {
    -> was testing against m_ThreshData before initializing it, so the code was executing, even when an EV connected
  • fix compiler warning in SetupMenu::Select()

20200507 SCL V7.0.1

  • added $SV

20200507 SCL V7.0.0
changes 20200411 merged from oev6 branch

  • added OpenEVSE V5.5+ support
    • detection by looking for PD7 LOW
    • RELAY_PWM - close relay w/ DC and the switch to PWM for hold
    • if not V5.5 hardware detected same behavior as before on charging pin
  • added $SC M to set max hardware current capacity. Can be written only once

D6.3.0 2020420 SCL

  • merge $SC M code from oev6 branch
  • merge PR#120

20200330 SCL

  • fixed SetAmmeterDirty(1) compile error

D6.2.1 20200327 SCL

  • doPost() - don't compare against hardcoded 900 .. use ThreshAB
  • send $AT during sleep if EV connect/disconnect

D6.2.0 20200327 SCL

  • fix 1 sec delay in showing current when charging starts
  • make space by taking stuff out of button menu that is still accessible via WiFi NOSETUP_MENU
  • add RAPI $FF B to enable/disable front button
  • fix bug in $AT.. was supposed to send GetCurrentCapacity(), not GetMaxCurrentCapacity()
  • change $GC .. new 4th returned parameter is max current capacity
  • bump RAPIVER to 5.1.0.
    -> n.b. shouldn't really be using RAPIVER.. should just test for working
    commands and # returned parameters

D6.1.3 20191217 SCL

  • fix bug in displaying lock icon in SLEEP
  • update EVSE status after receiving $S4 command
  • merge PR109 HEARTBEAT_SUPERVISION code by Tim Kuechler

D6.1.2 20191216 SCL

  • fix bug in relay opening delay code for SLEEP state - wasn't reading/comparing charging current correctly.. was always reading too low, so would instantly open the contactor
  • change SLEEP delay threshold current from 3A -> 1A

20191215 SCL

  • added #ifndef VERSION around #define VERSION

D6.1.1 20191215 SCL

  • display auth lock status on LCD in disabled & sleeping states

D6.1.0 20191003 SCL

  • if AUTH_LOCK != 0 or using hardware lock pin, always lock automatically in
    State A

20190822 SCL

  • for consistency/safety sake, force reboot after exiting Setup menu

20190709 SCL

  • turn on RAPI_WF -> makes sketch too big for AVR build tools 1.6.15
    -> testing v1.6.23, which builds sketch 32574 bytes and uses RAM 1570 (2 bytes less than 1.6.15)
  • turn off OCPP by default
  • N.B.: With current default settings, sketch is too big when built with AVR build tools v1.6.15. Can turn off RAPI_WF to reduce size, or use v1.6.23, which builds a sketch that fits - FOR TESTING ONLY

20190703 SCL

  • change OEII voltage defaults to lincomatic's from CraigK's

D6.0.0 20190626 SCL

  • added code to facilitate OCPP support
  • RAPI changes that may render code incompatible w/ existing clients
    -> see $AB, $AT, $GS
    -> $AB async notification sent at boot
    -> $AT replaces $ST async notification
    -> $GS has new extra parameters, and first parameter, state,
    is now HEX instead of DEC, for consistency with $AT
    -> sequence ID always enabled
    -> $FF command always enabled, deprecating old redundant commands
    -> $WF enabled only if RAPI_WF defined
    -> get rid of RAPI_RESPONSE_CHK define.. always enabled
  • J1772EvseController -> expand m_bVFlags to m_wVFlags, get rid of m_bVFlags2,
    clean up flag setting/clearing/testing code
    -> added ECVF_UI_IN_MENU... flag is set/unset when in/out of UI menus..
    $AT is sent on transition
    -> bump RAPIVER to 5.0.0

D5.2.0 20190329 SCL

  • change $GS to return state(hex) elapsed(dec) pilotstate(hex)
  • get rid of async notification $ST - always send $AT

D5.1.0 20181109 SCL

  • change session time & charge limits to be absolute instead of extending the current session. e.g. already charged 2kWh.. set limit to 3kWh ... stop @ 3kWh instead of 5kWh
Assets 6
Loading