Remove incorrect warning message #673
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
donavanbecker
approved these changes
Feb 11, 2023
|
@dnicolson, Thank you! |
donavanbecker
added a commit
that referenced
this pull request
Feb 11, 2023
## [Version 2.5.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.2) (2023-02-10) ## What's Changed - Fixes mappingMode not being read from the config directly, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#667](#667) - Fixes only_up mode in settings configuration, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#669](#669) - Removes runStatus check, fixes some logic, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#672](#672) - Remove unneeded async, Thanks [@dnicolson](https://github.com/dnicolson). [#675](#675) - Replace switchbot wait with utility function, Thanks [@dnicolson](https://github.com/dnicolson). [#674](#674) - Remove incorrect warning message, Thanks [@dnicolson](https://github.com/dnicolson). [#673](#673) - Housekeeping and updated dependencies. **Full Changelog**: v2.5.1....v2.5.2
Merged
donavanbecker
added a commit
that referenced
this pull request
Feb 11, 2023
## [Version 2.5.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.2) (2023-02-10) ## What's Changed - Fixes mappingMode not being read from the config directly, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#667](#667) - Fixes only_up mode in settings configuration, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#669](#669) - Removes runStatus check, fixes some logic, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#672](#672) - Remove unneeded async, Thanks [@dnicolson](https://github.com/dnicolson). [#675](#675) - Replace switchbot wait with utility function, Thanks [@dnicolson](https://github.com/dnicolson). [#674](#674) - Remove incorrect warning message, Thanks [@dnicolson](https://github.com/dnicolson). [#673](#673) - Housekeeping and updated dependencies. **Full Changelog**: v2.5.1....v2.5.2
donavanbecker
added a commit
that referenced
this pull request
Nov 8, 2023
# Changelog All notable changes to this project will be documented in this file. This project uses [Semantic Versioning](https://semver.org/) ## [Version 2.11.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.11.0) (2023-11-07) ## What's Changed - Added Latch Switch to activate Latch on Lock, Thanks [@quebulm](https://github.com/quebulm) [#859](#859) - Housekeeping and updated dependencies. **Full Changelog**: <v2.10.1...v2.11.0> ## [Version 2.10.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.10.1) (2023-11-01) ## What's Changed - Added webhook event listener for Bot, Ceiling Light, Color Bulb, Contact, Curtain, IOSensor, Light Strip, Lock, Motion, Plug, & Robot Vacuum Cleaner - Added Webhook config to Plugin Config UI. **Full Changelog**: <v2.10.0...v2.10.1> ## [Version 2.10.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.10.0) (2023-10-31) ## What's Changed - Added webhook event listener for Meter, Meter Plus, & Hub 2, Thanks [@banboobee](https://github.com/banboobee) [#850](#850) - Housekeeping and updated dependencies. **Full Changelog**: <v2.9.2...v2.10.0> ## [Version 2.9.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.9.2) (2023-10-26) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v2.9.1...v2.9.2> ## [Version 2.9.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.9.1) (2023-10-14) ## What's Changed - Fix issue with `FirmwareRevision` causing Homebridge Crash. Fixes [#839](#839), [#832](#832), [#829](#829), & [#828](#828) - Housekeeping and updated dependencies. **Full Changelog**: <v2.9.0...v2.9.1> ## [Version 2.9.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.9.0) (2023-09-16) ## What's Changed - Add other `deviceTypes` for IR Type `Other`. - Housekeeping and updated dependencies. **Full Changelog**: <v2.8.2...v2.9.0> ## [Version 2.8.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.8.2) (2023-08-27) ## What's Changed - Fixed issue with `BatteryLevel` & `FirmwareRevision` not displaying correctly for certain deviceTypes. - Fixed config issue where Eve History was not showing for WoIOSensor. - Housekeeping and updated dependencies. **Full Changelog**: <v2.8.1...v2.8.2> ## [Version 2.8.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.8.1) (2023-08-22) ## What's Changed - Added additional logging to catch statusCodes like 190 (Requests reached the daily limit). - Housekeeping and updated dependencies. **Full Changelog**: <v2.8.0...v2.8.1> ## [Version 2.8.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.8.0) (2023-08-19) ## What's Changed - Add Hub 2 Light-Level Support. [#776](#776) - Enable Meter Battery Level for OpenAPI, Thanks [@mrlt8](https://github.com/mrlt8) [#782](#782) - Enable Meter Plus Battery Level for OpenAPI, Thanks [@mrlt8](https://github.com/mrlt8) [#787](#787) - Enable Battery Level and Version for OpenAPI for BlindTilt, Bot, Ceiling Lights, Color Bulb, Contact, Curtain, Hub, Humidifier, Indoor/Outdoor Sensor, Light Strip, Lock, Meter, Meter Plus, Motion , Plug, Plug Mini, & Robot Vacuum Cleaner - Housekeeping and updated dependencies. **Full Changelog**: <v2.7.1...v2.8.0> ## [Version 2.7.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.7.1) (2023-07-29) ## What's Changed - Fixed Hub 2 temperature/humidity data for AC, Thanks [@mrlt8](https://github.com/mrlt8) [#779](#779) - Fixed TargetTemperature not being updated in the HomeKit, Thanks [@mrlt8](https://github.com/mrlt8) [#7779](#779) - Housekeeping and updated dependencies. **Full Changelog**: <v2.7.0...v2.7.1> ## [Version 2.7.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.7.0) (2023-07-25) ## What's Changed - Will now log if there are no devices discovered by SwitchBot-API. - Added the ability to use Tempature from a SwitchBot Meter to be used with an IR Air Conditioner, Thanks [@mrlt8](https://github.com/mrlt8) [#761](#761) - Adds the ability to enable EVE history SwitchBot Curtains, Thanks [@banboobee](https://github.com/banboobee) [#766](#766) - Housekeeping and updated dependencies. **Full Changelog**: <v2.6.2...v2.7.0> ## [Version 2.6.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.6.2) (2023-04-17) ## What's Changed - Fix for Commands not being sent, [#721](#721) - Housekeeping. **Full Changelog**: <v2.6.1...v2.6.2> ## [Version 2.6.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.6.1) (2023-04-15) ## What's Changed - Add Support for [SwitchBot Meter Plus (JP)](https://www.switchbot.jp/products/switchbot-meter-plus), Thanks [@tikuwas](https://github.com/tikuwas) [#642](#642) **Full Changelog**: <v2.6.0...v2.6.1> ## [Version 2.6.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.6.0) (2023-04-15) ## What's Changed - Add Support for [SwitchBot Hub 2](https://us.switch-bot.com/pages/switchbot-hub-2) Humidity and Temperature Sensor, Thanks [@Alvie](https://github.com/alvie). [#716](#716) - Housekeeping and updated dependencies. **Full Changelog**: <v2.5.3...v2.6.0> ## [Version 2.5.3](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.3) (2023-04-08) ## What's Changed - Removed unneeded async, Thanks [@dnicolson](https://github.com/dnicolson). [#699](#699) - Removed inMotion condition, Thanks [@dnicolson](https://github.com/dnicolson). [#703](#703) - Fix async method calls, Thanks [@dnicolson](https://github.com/dnicolson). [#690](#690) - Improve curtain retry functionality, Thanks [@dnicolson](https://github.com/dnicolson). [#694](#694) - Add Support for [SwitchBot Indoor/Outdoor Thermo-Hygrometer](https://www.switch-bot.com/products/switchbot-indoor-outdoor-thermo-hygrometer) - Housekeeping and updated dependencies. - This release will end support for Node v14. **Full Changelog**: <v2.5.2...v2.5.3> ## [Version 2.5.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.2) (2023-02-10) ## What's Changed - Fixes mappingMode not being read from the config directly, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#667](#667) - Fixes only_up mode in settings configuration, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#669](#669) - Removes runStatus check, fixes some logic, Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#672](#672) - Remove unneeded async, Thanks [@dnicolson](https://github.com/dnicolson). [#675](#675) - Replace switchbot wait with utility function, Thanks [@dnicolson](https://github.com/dnicolson). [#674](#674) - Remove incorrect warning message, Thanks [@dnicolson](https://github.com/dnicolson). [#673](#673) - Housekeeping and updated dependencies. **Full Changelog**: <v2.5.1...v2.5.2> ## [Version 2.5.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.1) (2023-01-28) ## What's Changed - Fix Blind Tilt Config. **Full Changelog**: <v2.5.0...v2.5.1> ## [Version 2.5.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.5.0) (2023-01-28) ## What's Changed - Add Intial Support for Blind Tilt (OpenAPI Only), Thanks [@AndreasVerhoeven](https://github.com/AndreasVerhoeven). [#649](#649) - Remove incorrect warning message, Thanks [@dnicolson](https://github.com/dnicolson). [#661](#661) - Replace switchbot wait with utility function, Thanks [@dnicolson](https://github.com/dnicolson). [#633](#633) - Enhancements to BLE functionality. - Housekeeping and updated dependencies. **Full Changelog**: <v2.4.0...v2.5.0> ## [Version 2.4.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.4.0) (2022-12-27) ## What's Changed - Added a new `Bot` Device Type `Multi-Press`, Thanks [@alvst](https://github.com/alvst). [#628](#628) - Added `maxRetry` option for `Curtain`, `Celing Light`, `Celing Light Pro`, `Plug`, `Plug Mini (US)`, `Plug Mini (JP)`, `Robot Vacuum Cleaner S1 Plus`, `Robot Vacuum Cleaner S1`, `Color Bulb`, and `Strip Light` Device Types, Thanks [@dnicolson](https://github.com/dnicolson). [#631](#631) - Fix max retry option for `Bot`, `Curtain`, `Celing Light`, `Celing Light Pro`, `Plug`, `Plug Mini (US)`, `Plug Mini (JP)`, `Robot Vacuum Cleaner S1 Plus`, `Robot Vacuum Cleaner S1`, `Color Bulb`, and `Strip Light` Device Types, Thanks [@dnicolson](https://github.com/dnicolson). [#630](#628) - Moved `maxRetry` option from `Bot` level to overall `configDeviceType` level. - **If you had this set for your `Bot` you will have to update this config.** - Housekeeping and updated dependencies. **Full Changelog**: <v2.3.2...v2.4.0> ## [Version 2.3.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.3.2) (2022-12-16) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v2.3.1...v2.3.2> ## [Version 2.3.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.3.1) (2022-12-11) ## What's Changed - Fixed TypeError: Cannot read properties of undefined (reading 'setCharacteristic'). [#610](#610) - Housekeeping and updated dependencies. **Full Changelog**: <v2.3.0...v2.3.1> ## [Version 2.3.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.3.0) (2022-12-08) ## What's Changed - Added Support for SwitchBot Robot Vacuum Cleaner S1 & SwitchBot Robot Vacuum Cleaner S1 Plus - Add Read-only BLE Support for Smart Lock. - Added `disablePushDetail` config to IR Air Conditioners. - Fixed issue where Meter did not parsing temperature. [#571](#571) - Housekeeping and updated dependencies. **Full Changelog**: <v2.2.2...v2.3.0> ## [Version 2.2.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.2.2) (2022-10-22) ## What's Changed - Changed from `allowPushOn` and `allowPushOff` configs to `disablePushOn` and `disablePushOff` config, so default is to push changes. - Removed `disable_power` config in favor of `disablePushOn` and `disablePushOff` config settings. - Fixed Issue where IR Devices commands wouldn't send commands. [#551](#551), [#553](#553), [#545](#545) - Issue where plugin would continue to crash homebridge. [#547](#547) - Fix for node-switchbot showing not installed. - Housekeeping and updated dependencies. **Full Changelog**: <v2.2.1...v2.2.2> ## [Version 2.2.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.2.1) (2022-10-18) ## What's Changed - Fix for node-switchbot showing not installed. **Full Changelog**: <v2.2.0...v2.2.1> ## [Version 2.2.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.2.0) (2022-10-18) ## What's Changed - Moved Air Conditioner config `PushOn` to be an overal IR Device config of `allowPushOn` and `allowPushOff`. - Fixed Issue where Brightness characteristic received "NaN". [#518](#518) - Fixed Issue where IR TVs would not default to External Device. [#520](#518) - Housekeeping and updated dependencies. **Full Changelog**: <v2.1.2...v2.2.0> ## [Version 2.1.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.1.2) (2022-10-14) ## What's Changed - Fix issue with IR Devices not having a default `ConnectionType`. [#527](#527) - Housekeeping and updated dependencies. **Full Changelog**: <v2.1.1...v2.1.2> ## [Version 2.1.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.1.1) (2022-10-14) ## What's Changed - Fixed issue were `CustomOff` would send incorrect commands. Also Resolves [#409](#409). - Fixed issue were IR Commands were not sent from IR Devices, Thanks [@jonzhan](https://github.com/jonzhan). [#520](#520) - Fixed issue with Curtain not refreshing moving status. [#517](#517) - Fix issue with IR Devices not having a default `ConnectionType`. [#527](#527) - Housekeeping and updated dependencies. **Full Changelog**: <v2.1.0...v2.1.1> ## [Version 2.1.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.1.0) (2022-10-13) ## What's Changed - Added `pushRatePress` config to set how many seconds inbetween doublePresses. - Also if `doublePress` isn't set it will not wait to pushChanges. - Added `customize` config option which will allow for custom On and off commands for IR Devices. - Added `customOn` & `customOff` to set custom commands for IR Devices. - Removed `Other`: `commandOn` & `commandOff` you will have to change your commands to the new `customOn` & `customOff` config under the `customize` config. - Fixed issue where devices are not exposed to Homekit. [#507](#507), [#508](#508), [#513](#513) - Fixed issue with Non-group Curtains being removed or not displaying in Homekit. [#510](#510) - Fixed issue were Plugin was waiting 15 seconds before sending command to SwitchBot API. [#509](#509) - Housekeeping and updated dependencies. **Full Changelog**: <v2.0.0...v2.1.0> ## [Version 2.0.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v2.0.0) (2022-10-12) ## What's Changed - Moved from v1.0 to v1.1 of [OpenAPI](https://github.com/OpenWonderLabs/SwitchBotAPI) - Added Config that allows device(s) to be published as an external accessory. - Added `connectionType` config, this replaces the `BLE` config. - You can now select Both Connections, Only OpenAPI, Only BLE, or Disable. - `Both` will use BLE as the default connection and will use OpenAPI as a backup connection. - `OpenAPI` will only allow connections through the OpenAPI. - `BLE` will only allow connections through Bluetooth (BLE), . - `Disable` will disable all connections. This will also allow you to disable commands and refreshes for a specific device but leave it in HomeKit. - Added Support for Ceiling Light & Ceiling Light Pro - Fixes Smart Lock Issues fixed in v1.1 of OpenAPI. [#462](#462) = Fixes excesive logging from node-switchbot. [#435](#435), [#444](#444), [#446](#446) - Housekeeping and updated dependencies. **Full Changelog**: <v1.15.0...v2.0.0> ## [Version 1.15.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.15.0) (2022-08-27) ## What's Changed - Added BLE support for PlugMini (US) & PlugMini (JP) - Housekeeping and updated dependencies. **Full Changelog**: <v1.14.2...v1.15.0> ## [Version 1.14.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.14.2) (2022-08-20) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v1.14.1...v1.14.2> ## [Version 1.14.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.14.1) (2022-06-28) ## What's Changed - Fixed some logging. - Housekeeping and updated dependencies. **Full Changelog**: <v1.14.0...v1.14.1> ## [Version 1.14.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.14.0) (2022-06-25) ## What's Changed - Added support for Smart Lock commands over OpenAPI. Thanks [tom-todd](https://github.com/tom-todd) [#382](#337) & [#387](#337) - Housekeeping and updated dependencies. **Full Changelog**: <v1.13.0...v1.14.0> ## [Version 1.13.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.13.0) (2022-05-04) ## What's Changed - Added MQTT support for Meter and Curtain devices. Thanks [banboobee](#337) - Added Eve history features for meter devices. Thanks [banboobee](https://github.com/banboobee) [#338](#338) - Added Config `setOpenMode` and `setCloseMode` so that you can set mode to be Performance or Silent. - Added Config to allow manually setting firmware version. - Fixed Smart Lock Display state status. - Still unable to control Locks because of API limitations. - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.8...v1.13.0> ## [Version 1.12.8](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.8) (2022-03-19) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.7...v1.12.8> ## [Version 1.12.7](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.7) (2022-03-07) ## What's Changed - Seperated Color Bulb and Strip Lights - Strip Lights no longer support Adaptive Lighting. - Adaptive Lighting requires Color Temperature, which Strip Lights do not support. - Seperated Meter and Meter Plus for BLE purposes. - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.6...v1.12.7> ## [Version 1.12.6](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.6) (2022-03-04) ## What's Changed - Fix for Curtain v3.3 and above, from v1.2.0 node-switchbot update. - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.5...v1.12.6> ## [Version 1.12.5](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.5) (2022-02-15) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.4...v1.12.5> ## [Version 1.12.4](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.4) (2022-02-12) ## What's Changed - Fix support for Meter Plus - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.3...v1.12.4> ## [Version 1.12.3](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.3) (2022-02-05) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.2...v1.12.3> ## [Version 1.12.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.2) (2022-02-02) ## What's Changed - Fix: Issue where `PositionState` was not being sent back to Home App. Fixes [#123](#123) Thanks [@dnicolson](https://github.com/dnicolson)! **Full Changelog**: <v1.12.1...v1.12.2> ## [Version 1.12.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.1) (2022-02-01) ## What's Changed - Housekeeping and updated dependencies. **Full Changelog**: <v1.12.0...v1.12.1> ## [Version 1.12.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.12.0) (2022-01-29) ## What's Changed - Add option `maxRetry` for bots so you can set the number of retries for sending on or off for Bot. **Full Changelog**: <v1.11.2...v1.12.0> ## [Version 1.11.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.11.2) (2022-01-29) ## What's Changed - Fix: Use `updateRate` instead of `refreshRate` when overriding `scanDuration`. **Full Changelog**: <v1.11.1...v1.11.2> ## [Version 1.11.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.11.1) (2022-01-29) ## What's Changed - Fix: `This plugin generated a warning from the characteristic 'Brightness': characteristic value expected valid finite number and received "undefined" (undefined)`. - Fix: `This plugin generated a warning from the characteristic 'Color Temperature': characteristic value expected valid finite number and received "undefined" (undefined)`. - Fix: `This plugin generated a warning from the characteristic 'Hue': characteristic value expected valid finite number and received "undefined" (undefined)`. - Fix: `This plugin generated a warning from the characteristic 'Saturation': characteristic value expected valid finite number and received "undefined" (undefined)`. **Full Changelog**: <v1.11.0...v1.11.1> ## [Version 1.11.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.11.0) (2022-01-29) ## What's Changed - Add Support for SwitchBot Smart Lock - Add Support for SwitchBot Strip Light - Add Support for SwitchBot Meter Plus (US) - Add Support for SwitchBot Meter Plus (JP) - Add Support for SwitchBot Plug Mini (US) - Add Support for SwitchBot Plug Mini (US) - Fixed: Curtain `set_min` and `set_max` options not work correctly with minimum and maximum curtain state. [#123](#123) - Housekeeping and updated dependencies. **Full Changelog**: <v1.10.1...v1.11.0> ## [Version 1.10.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.10.1) (2022-01-26) ## What's Changed - Fixed: Option `pushOn` was not push `On` commands. - Housekeeping and updated dependencies. **Full Changelog**: <v1.10.0...v1.10.1> ## [Version 1.10.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.10.0) (2022-01-21) ## What's Changed - Add option `pushOn`, this will allow the `On` commands to be sent along side `Status` change commands. - Housekeeping and updated dependencies. **Full Changelog**: <v1.9.0...v1.10.0> ## [Version 1.9.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.9.0) (2022-01-20) ## What's Changed - Add option `allowPush`, this will allow commands to be sent even if device state is already in state that is being pushed. - Housekeeping and updated dependencies. **Full Changelog**: <v1.8.2...v1.9.0> ## [Version 1.8.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.8.2) (2022-01-15) ## What's Changed - Fixed Bug: Only log config if it is set. **Full Changelog**: <v1.8.1...v1.8.2> ## [Version 1.8.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.8.1) (2022-01-15) ## What's Changed - Fixed Bug: Cannot set properties of undefined (setting 'logging') **Full Changelog**: <v1.8.0...v1.8.1> ## [Version 1.8.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.8.0) (2022-01-14) ## What's Changed - Added option to display Bot a Stateful Programmable Switch. - This will only Works in 3rd Party Home App, Like [Eve](https://apps.apple.com/us/app/eve-for-homekit/id917695792) or [Home+ 5](https://apps.apple.com/us/app/home-5/id995994352) - Add option to Hide Motion Sensor's Light Sensor. - Add option to Set Motion Sensor's Light Sensor `set_minLux` and `set_maxLux`. - Fixed Bug: Where BLE config would show for devices that don't support BLE. - Fixed Bug: Contact Sensors's Motion Sensor and Light Sensor showing undefined values. - Fixed Bug: Motion Sensors's Light Sensor showing undefined values. - Fixed Bug: Battery Service wouldn't be removed from Curtain, Contact Sensor, or Motion Sensor when switching from BLE to OpenAPI. - Enhancments: Made some improvemnt on the switch from BLE to OpenAPI when BLE connection fails. - Enhancments: Made Optional Switchbot Device Settings and Optional IR Device Settings more managable by using Tabs. - Change: Changed Curtain `refreshRate` to `updateRate`. - You will have to update your config for it to pickup the new `updateRate`. - Housekeeping and updated dependencies. **Full Changelog**: <v1.7.0...v1.8.0> ## [Version 1.7.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.7.0) (2022-01-05) ## What's Changed - Added option to display Bot a Fan. - Added option to display Bot a Door. [#179](#179) - Added option to display Bot a Lock. [#179](#179) - Added option to display Bot a Faucet. - Added option to display Bot a Window. - Added option to display Bot a WindowCovering. - Added option to display Bot a Garage Door Opener. [#179](#179) **Full Changelog**: <v1.6.3...v1.7.0> ## [Version 1.6.3](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.6.3) (2022-01-03) ## What's Changed - Quick Fix for for issue not tested in `v1.6.2`. **Full Changelog**: <v1.6.2...v1.6.3> ## [Version 1.6.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.6.2) (2022-01-03) ## What's Changed - Fixed Bug: npm ERR! code 1. [#151](#151) - Made `node-switchbot` an optionalDependencies - So If `node-switchbot` doesn't get installed successfully then BLE will not work. - Housekeeping and updated dependencies. **Full Changelog**: <v1.6.1...v1.6.2> ## [Version 1.6.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.6.1) (2022-01-02) ## What's Changed - Fixed an issue where when `Adaptive Lighting Shift` was set to -1, Adaptive Lighting would not be removed. - Fixed an issue with motion sensor refreshStatus that would cause plugin to cause Homebridge restart. - Fixed Bug: npm ERR! code 1. [#151](#151) - Made `node-switchbot` an optionalDependencies - So If `node-switchbot` doesn't get installed successfully then BLE will not work. - Housekeeping and updated dependencies. **Full Changelog**: <v1.6.0...v1.6.1> ## [Version 1.6.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.6.0) (2021-12-31) ## What's Changed - Added `scanDuration` config option to set how long BLE scans, Scanning Duration is defaulted to 1 second. - Now Setting `switch` as the default bot mode for Bots, to change to press, config must be set under `SwitchBot Device Settings` in the Plugin Settings. - Fixed Bug: Contact Sensor talks about Curtain Light + Motion Sensor. [#164](#164) - Fixed Bug: Reboot causes No Device Type Set Error. [#172](#172) - Fixed Bug: Bot Status not working Correction with Switch and Press. [#105](#105), [#130](#130), [#132](#132), [#165](#165), [#174](#174) - Fixed some issues with the New Logging Options release with v1.5.0, now logging when configured. **Full Changelog**: <v1.5.0...v1.6.0> ## [Version 1.5.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.5.0) (2021-12-27) ## What's Changed ### Major Change To `Logging` - Added the following Logging Options: - `Standard` - `None` - `Debug` - Removed Device Logging Option, which was pushed into new logging under debug. - Added Device Logging Override for each Device, by using the Device Config. ### Major Changes to `refreshRate` - Added an option to override `refreshRate` for each Device, by using the Device Config. ### Other Changes - Fixed Bug: Air conditioner temperature not able to change. [#43](#43) - Housekeeping and updated dependencies. **Full Changelog**: <v1.4.0...v1.5.0> ## [Version 1.4.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.4.0) (2021-12-15) ## What's Changed - Added Status Messages to logs for discoverDevices request. - Added Cached Status to IR device, Status will be saved to accessory context and restored on restart. - Added Option `Offline as Off` to be able set the device as off, if API reports offline. - Removed Meter Unit Config Option as it was confusing and probably never used. - Housekeeping and updated dependencies. **Full Changelog**: <v1.3.0...v1.4.0> ## [Version 1.3.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.3.0) (2021-12-02) ## What's Changed - Added Adpative Lighting to Color Bulb - Added Option `Adaptive Lighting Shift` to be able us this value to increase the mired for the Adaptive Lighting update, making the light appear warmer. - Fixed Bug: Color Bulb can't change color and is not dimmable. [#97](#97) **Full Changelog**: <v1.2.5...v1.3.0> ## [Version 1.2.5](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.5) (2021-11-25) ## What's Changed - Fixed Bug: Where `set_minLux` & `set_maxLux` config settings not effecting OpenAPI Lux. **Full Changelog**: <v1.2.4...v1.2.5> ## [Version 1.2.4](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.4) (2021-11-24) ## What's Changed - Fixed Bug: Cannot read properties of undefined (reading 'updateCharacteristic'). **Full Changelog**: <v1.2.3...v1.2.4> ## [Version 1.2.3](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.3) (2021-11-24) ## What's Changed - When BLE Connection isn't established, allow for OpenAPI to kick in if `openToken` is supplied. **Full Changelog**: <v1.2.2...v1.2.3> ## [Version 1.2.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.2) (2021-11-24) ## What's Changed - Allow the `configDeviceName` to override `deviceName`. - Added Logging when BLE Connection wasn't established. **Full Changelog**: <v1.2.1...v1.2.2> ## [Version 1.2.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.1) (2021-11-24) ## What's Changed - Fixed Bug: Curtains alternate between open/close state. [#85](#85) - Fixed Bug: Meter not working with BLE. [#110](#110) - Housekeeping and updated dependencies. **Full Changelog**: <v1.2.0...v1.2.1> ## [Version 1.2.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.2.0) (2021-11-19) ## What's Changed - Added option to be able to do Bluetooth Low Energy (BLE) Only Connection. - Must supply `Device ID` & `Device Name` to the Device Config - Must Check `Enable Bluetooth Low Energy (BLE) Connection` - Fixed Bug: Air conditioner temperature not able to change. [#43](#43) - Add option to set Min Lux and Max Lux for Curtain's Light Sensor. - Add `updateHomeKitCharacteristics` to IR Devices to contain all `updateCharacteristics` in one spot. - Add `Saturation` and `Hue` to Colorbulb. - Housekeeping and updated dependencies. **Full Changelog**: <v1.1.0...v1.2.0> ## [Version 1.1.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.1.0) (2021-11-16) ## What's Changed - Fixed Bug: Curtains alternate between open/close state. [#85](#85) - Fixed Bug: IR Fan won't be hidden in Home app. [#90](#90) - Fixed Bug: `hide_temperature` config option causing `Cannot read property 'updateCharacteristic' of undefined` for Humidifiers. [#89](#89) - Add option to Hide Curtain's Light Sensor. [#91](#91) - Add option to Hide Contact Sensor's Motion Sensor or Light Sensor. **Full Changelog**: <v1.0.2...v1.1.0> ## [Version 1.0.2](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.0.2) (2021-11-15) ## What's Changed - Fixed Bug: `failed to discover devices. cannot read property 'touppercase' of undefined`. [#84](#84) - Housekeeping and updated dependencies. **Full Changelog**: <v1.0.1...v1.0.2> ## [Version 1.0.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.0.1) (2021-11-14) ## What's Changed - Fixed `Cannot read properties of undefined (reading 'updateCharacteristic')` on Bots. [#77](#77) - Fixed Temperature not being retrieved for Switchbot Meter. [#78](#78) **Full Changelog**: <v1.0.0...v1.0.1> ## [Version 1.0.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v1.0.0) (2021-11-13) ## What's Changed - Offical release of homebridge-Switchbot, which combines both BLE and OpenAPI into 1 plugin. - Adds Light Sensors to Curtains - with iOS 15.1 you can set automations on light sensors. - Adds Motion Sensor to Contact Sensors - Adds Support Color Bulbs **Full Changelog**: <v0.1.1...v1.0.0> ## [Version 0.1.1](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v0.1.1) (2021-09-11) ## What's Changed - Fix Contact Sensor adding as Motion Sensor instead of Contact Sensor **Full Changelog**: <v0.1.0...v0.1.1> ## [Version 0.1.0](https://github.com/OpenWonderLabs/homebridge-switchbot/releases/tag/v0.1.0) (2021-09-10) ## What's Changed - Initial release of homebridge-switchbot. - Adds Support for Motion & Contact Sensors - Adds Water Level to Humidifier
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
♻️ Current situation
An incorrect warning message is logged,
scanDurationis referenced in a condition that is not possible.💡 Proposed solution
Remove logging and fix a typo.
Based on #661.