Controls zoom equipments using the Pedal Pi API.
Probably PedalPi requirements
sudo apt-get install portaudio19-devThis library extends PluginsManager to control third effects unit. Note that for this to be possible, the effects unit must be communicable by some protocol (usually MIDI) and someone in the community must implement support in this library. These are currently supported devices. A detailed list of support for each device is below.
# Instantiate
zoom = ZoomG3v2()
# Connect the object 'zoom' with the real equipment
zoom.connect()
# Load all patches from the equipment
zoom.load_data()
# Disconnect the equipment
zoom.disconnect()Columns:
Command: FeaturePedalboard: Information sended by the Zoom G3 equipment in the "pedalboard" message data. These are usually messages about the state of a pedalboard, but it is possible (but not yet verified) that general information about the equipment is also passed, such as battery information, global level, etc ...Read Change: Zoom equipment informs a change applied directly in itSend Change: API informs changes to the Zoom equipment
+-------------------+------------+-------------+-------------+ | | Command | +-------------------+------------+-------------+-------------+ | Command | Pedalboard | Read Change | Send Change | +===================+============+=============+=============+ | Pedalboard/Patch data | +-------------------+------------+-------------+-------------+ | Patch Name | x | x | | +-------------------+------------+-------------+-------------+ | Patch Level | x | x | x | +-------------------+------------+-------------+-------------+ | Patch Display pos | ? | no support | ? | +-------------------+------------+-------------+-------------+ | Effect | x | x | x | +-------------------+------------+-------------+-------------+ | Effect status | x | x | x | +-------------------+------------+-------------+-------------+ | Param value | x | x | x | +-------------------+------------+-------------+-------------+ | CTRL SW/PDL | | | | +-------------------+------------+-------------+-------------+ | PDL DST | | | | +-------------------+------------+-------------+-------------+ | Swap effects | | | ? | +-------------------+------------+-------------+-------------+ | Set current patch | x | x | x | +-------------------+------------+-------------+-------------+ | Tunner | +-------------------+------------+-------------+-------------+ | Tunner on/off | | no support | only API | +-------------------+------------+-------------+-------------+ | Tunner+mute on/off| | no support | only API | +-------------------+------------+-------------+-------------+ | Replace/swap | +-------------------+------------+-------------+-------------+ | Replace patch | | | ? | +-------------------+------------+-------------+-------------+ | Swap patches | | | ? | +-------------------+------------+-------------+-------------+ | Global data | +-------------------+------------+-------------+-------------+ | Global tempo | | | only API | +-------------------+------------+-------------+-------------+ | Global level | | no support | ? | +-------------------+------------+-------------+-------------+ | Global output | | no support | ? | +-------------------+------------+-------------+-------------+ | Signal patch | | | ? | +-------------------+------------+-------------+-------------+ | Battery | | no support | ? | +-------------------+------------+-------------+-------------+ | LCD | | no support | ? | +-------------------+------------+-------------+-------------+ | Autosave (on off) | | | ? | +-------------------+------------+-------------+-------------+ | USB audio volume | | no support | ? | +-------------------+------------+-------------+-------------+ | Other messages | +-------------------+------------+-------------+-------------+ | Get current patch | x | x | +-------------------+------------+-------------+-------------+ | Change autosaved | | no support | +-------------------+------------+-------------+-------------+ | Manual save msg | | | +-------------------+------------+-------------+-------------+
Legend:
Blank cells: Not implemented. It may be supported.x: Integrated with PluginsManager APIonly API: Not yet integrated with PluginsManager API?: Unknown. Probably not possibleno support: Equipment doesn't informs/receive information about
Other info:
- Changes applied by the API are not automatically saved to the device.
- If the autosave option is active on the machine, it eventually saves the latest changes. However, changes made may be lost if the connection to the equipment is terminated before the autosave saves it.
# Instantiate
zoom = ZoomMS50gv3()
# Connect the object 'zoom' with the real equipment
zoom.connect()
# Load all patches from the equipment
zoom.load_data()
# Disconnect the equipment
zoom.disconnect()Columns:
Command: FeaturePedalboard: Information sended by the Zoom G3 equipment in the "pedalboard" message data. These are usually messages about the state of a pedalboard, but it is possible (but not yet verified) that general information about the equipment is also passed, such as battery information, global level, etc ...Read Change: Zoom equipment informs a change applied directly in itSend Change: API informs changes to the Zoom equipment
+-------------------+------------+-------------+-------------+ | | Command | +-------------------+------------+-------------+-------------+ | Command | Pedalboard | Read Change | Send Change | +===================+============+=============+=============+ | Pedalboard/Patch data | +-------------------+------------+-------------+-------------+ | Patch Name | x | no support | | +-------------------+------------+-------------+-------------+ | Patch Level | no support | +-------------------+------------+-------------+-------------+ | Patch Display pos | | no support | | +-------------------+------------+-------------+-------------+ | Effect | x | | | +-------------------+------------+-------------+-------------+ | Effect status | x | | x:0-2 | +-------------------+------------+-------------+-------------+ | Param value | x | | x:0-2 | +-------------------+------------+-------------+-------------+ | CTRL SW/PDL | no support | +-------------------+------------+-------------+-------------+ | PDL DST | no support | +-------------------+------------+-------------+-------------+ | Swap effects | | | +-------------------+------------+-------------+-------------+ | Set current patch | no support | | only API | +-------------------+------------+-------------+-------------+ | Tunner | +-------------------+------------+-------------+-------------+ | Tunner on/off | ? | no support | only API | +-------------------+------------+-------------+-------------+ | Tunner+mute on/off| ? | no support | only API | +-------------------+------------+-------------+-------------+ | Replace/swap | +-------------------+------------+-------------+-------------+ | Replace patch | no support | | +-------------------+------------+-------------+-------------+ | Swap patches | no support | | +-------------------+------------+-------------+-------------+ | Global data | +-------------------+------------+-------------+-------------+ | Global tempo | | conflictTAP | | +-------------------+------------+-------------+-------------+ | Global level | no support | +-------------------+------------+-------------+-------------+ | Global output | no support | +-------------------+------------+-------------+-------------+ | Signal patch | no support | +-------------------+------------+-------------+-------------+ | Battery | | no support | | +-------------------+------------+-------------+-------------+ | LCD | | no support | | +-------------------+------------+-------------+-------------+ | Autosave (on off) | | no support | | +-------------------+------------+-------------+-------------+ | USB audio volume | no support | +-------------------+------------+-------------+-------------+ | Other messages | +-------------------+------------+-------------+-------------+ | Get current patch | no support | | +-------------------+------------+-------------+-------------+ | Change autosaved | no support | | +-------------------+------------+-------------+-------------+ | Manual save msg | | | +-------------------+------------+-------------+-------------+
Legend:
conflictTAP: Same message to the 4º effect 7º param valueBlank cells: Not implemented. It may be supported.x: Integrated with PluginsManager APIonly API: Not yet integrated with PluginsManager APIonly API:0-2:only API, but only works with 0-2 effects?: Unknown. Probably not possibleno support: Equipment doesn't informs/receive information about