V4L2 header extended for zorder support #5

Docker-J · 2013-02-11T04:49:58Z

http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=dc98424eea8f9e96359515dbb8f6dbf354af1a04

Printing the "start_ip" for every secondary cpu is very noisy on a large system - and doesn't add any value. Drop this message. Console log before: Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 96000 #2 smpboot cpu 2: start_ip = 96000 #3 smpboot cpu 3: start_ip = 96000 #4 smpboot cpu 4: start_ip = 96000 ... #31 smpboot cpu 31: start_ip = 96000 Brought up 32 CPUs Console log after: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok. Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok. Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31 Brought up 32 CPUs Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/4f452eb42507460426@agluck-desktop.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Otherwise we are not able to run more than one device per driver: [ 24.743045] kmem_cache_create: duplicate cache iwl_dev_cmd [ 24.743051] Pid: 3165, comm: NetworkManager Not tainted 3.3.0-rc2-wl+ #5 [ 24.743054] Call Trace: [ 24.743066] [<ffffffff811717d5>] kmem_cache_create+0x655/0x700 [ 24.743101] [<ffffffffa03b9f8b>] iwl_alive_notify+0x1cb/0x1f0 [iwlwifi] [ 24.743111] [<ffffffffa03ba442>] iwl_load_ucode_wait_alive+0x1b2/0x220 [iwlwifi] [ 24.743142] [<ffffffffa03ba893>] iwl_run_init_ucode+0x73/0x100 [iwlwifi] [ 24.743152] [<ffffffffa03b8fa1>] __iwl_up+0x81/0x220 [iwlwifi] [ 24.743161] [<ffffffffa03b91c0>] iwlagn_mac_start+0x80/0x190 [iwlwifi] [ 24.743188] [<ffffffffa03307b3>] ieee80211_do_open+0x293/0x770 [mac80211] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>

I get this lockdep warning from swapping load on linux-next, due to "vmscan: kswapd carefully call compaction". ================================= [ INFO: inconsistent lock state ] 3.3.0-rc2-next-20120201 #5 Not tainted --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/28 [HC0[0]:SC0[0]:HE1:SE1] takes: (pcpu_alloc_mutex){+.+.?.}, at: [<ffffffff810d6684>] pcpu_alloc+0x67/0x325 {RECLAIM_FS-ON-W} state was registered at: [<ffffffff81099b75>] mark_held_locks+0xd7/0x103 [<ffffffff8109a13c>] lockdep_trace_alloc+0x85/0x9e [<ffffffff810f6bdc>] __kmalloc+0x6c/0x14b [<ffffffff810d57fd>] pcpu_mem_zalloc+0x59/0x62 [<ffffffff810d5d16>] pcpu_extend_area_map+0x26/0xb1 [<ffffffff810d679f>] pcpu_alloc+0x182/0x325 [<ffffffff810d694d>] __alloc_percpu+0xb/0xd [<ffffffff8142ebfd>] snmp_mib_init+0x1e/0x2e [<ffffffff8185cd8d>] ipv4_mib_init_net+0x7a/0x184 [<ffffffff813dc963>] ops_init.clone.0+0x6b/0x73 [<ffffffff813dc9cc>] register_pernet_operations+0x61/0xa0 [<ffffffff813dca8e>] register_pernet_subsys+0x29/0x42 [<ffffffff8185d044>] inet_init+0x1ad/0x252 [<ffffffff810002e3>] do_one_initcall+0x7a/0x12f [<ffffffff81832bc5>] kernel_init+0x9d/0x11e [<ffffffff814e51e4>] kernel_thread_helper+0x4/0x10 irq event stamp: 656613 hardirqs last enabled at (656613): [<ffffffff814e0ddc>] __mutex_unlock_slowpath+0x104/0x128 hardirqs last disabled at (656612): [<ffffffff814e0d34>] __mutex_unlock_slowpath+0x5c/0x128 softirqs last enabled at (655568): [<ffffffff8105b4a5>] __do_softirq+0x120/0x136 softirqs last disabled at (654757): [<ffffffff814e52dc>] call_softirq+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pcpu_alloc_mutex); <Interrupt> lock(pcpu_alloc_mutex); *** DEADLOCK *** no locks held by kswapd0/28. stack backtrace: Pid: 28, comm: kswapd0 Not tainted 3.3.0-rc2-next-20120201 #5 Call Trace: [<ffffffff810981f4>] print_usage_bug+0x1bf/0x1d0 [<ffffffff81096c3e>] ? print_irq_inversion_bug+0x1d9/0x1d9 [<ffffffff810982c0>] mark_lock_irq+0xbb/0x22e [<ffffffff810c5399>] ? free_hot_cold_page+0x13d/0x14f [<ffffffff81098684>] mark_lock+0x251/0x331 [<ffffffff81098893>] mark_irqflags+0x12f/0x141 [<ffffffff81098e32>] __lock_acquire+0x58d/0x753 [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff81099433>] lock_acquire+0x54/0x6a [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff8107a5b8>] ? add_preempt_count+0xa9/0xae [<ffffffff814e0a21>] mutex_lock_nested+0x5e/0x315 [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff81098f81>] ? __lock_acquire+0x6dc/0x753 [<ffffffff810c9fb0>] ? __pagevec_release+0x2c/0x2c [<ffffffff810d6684>] pcpu_alloc+0x67/0x325 [<ffffffff810c9fb0>] ? __pagevec_release+0x2c/0x2c [<ffffffff810d694d>] __alloc_percpu+0xb/0xd [<ffffffff8106c35e>] schedule_on_each_cpu+0x23/0x110 [<ffffffff810c9fcb>] lru_add_drain_all+0x10/0x12 [<ffffffff810f126f>] __compact_pgdat+0x20/0x182 [<ffffffff810f15c2>] compact_pgdat+0x27/0x29 [<ffffffff810c306b>] ? zone_watermark_ok+0x1a/0x1c [<ffffffff810cdf6f>] balance_pgdat+0x732/0x751 [<ffffffff810ce0ed>] kswapd+0x15f/0x178 [<ffffffff810cdf8e>] ? balance_pgdat+0x751/0x751 [<ffffffff8106fd11>] kthread+0x84/0x8c [<ffffffff814e51e4>] kernel_thread_helper+0x4/0x10 [<ffffffff810787ed>] ? finish_task_switch+0x85/0xea [<ffffffff814e3861>] ? retint_restore_args+0xe/0xe [<ffffffff8106fc8d>] ? __init_kthread_worker+0x56/0x56 [<ffffffff814e51e0>] ? gs_change+0xb/0xb The RECLAIM_FS notations indicate that it's doing the GFP_FS checking that Nick hacked into lockdep a while back: I think we're intended to read that "<Interrupt>" in the DEADLOCK scenario as "<Direct reclaim>". I'm hazy, I have not reached any conclusion as to whether it's right to complain or not; but I believe it's uneasy about kswapd now doing the mutex_lock(&pcpu_alloc_mutex) which lru_add_drain_all() entails. Nor have I reached any conclusion as to whether it's important for kswapd to do that draining or not. But so as not to get blocked on this, with lockdep disabled from giving further reports, here's a patch which removes the lru_add_drain_all() from kswapd's callpath (and calls it only once from compact_nodes(), instead of once per node). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

… CPUs Loading the microcode driver on an unsupported CPU and subsequently unloading the driver causes WARNING: at fs/sysfs/group.c:138 mc_device_remove+0x5f/0x70 [microcode]() Hardware name: 01972NG sysfs group ffffffffa00013d0 not found for kobject 'cpu0' Modules linked in: snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel btusb snd_hda_codec bluetooth thinkpad_acpi rfkill microcode(-) [last unloaded: cfg80211] Pid: 4560, comm: modprobe Not tainted 3.4.0-rc2-00002-g258f742 #5 Call Trace: [<ffffffff8103113b>] ? warn_slowpath_common+0x7b/0xc0 [<ffffffff81031235>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff81120e74>] ? sysfs_remove_group+0x34/0x120 [<ffffffffa00000ef>] ? mc_device_remove+0x5f/0x70 [microcode] [<ffffffff81331eb9>] ? subsys_interface_unregister+0x69/0xa0 [<ffffffff81563526>] ? mutex_lock+0x16/0x40 [<ffffffffa0000c3e>] ? microcode_exit+0x50/0x92 [microcode] [<ffffffff8107051d>] ? sys_delete_module+0x16d/0x260 [<ffffffff810a0065>] ? wait_iff_congested+0x45/0x110 [<ffffffff815656af>] ? page_fault+0x1f/0x30 [<ffffffff81565ba2>] ? system_call_fastpath+0x16/0x1b on recent kernels. This is due to commit 8a25a2f ("cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem") which renders commit 6c53cbf ("x86, microcode: Correct sysdev_add error path") useless. See http://marc.info/?l=linux-kernel&m=133416246406478 Avoid above warning by restoring the old driver behaviour before 6c53cbf ("x86, microcode: Correct sysdev_add error path"). Cc: stable@vger.kernel.org Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

commit ebed633 upstream. The logic that allows to have a short TFD queue was completely wrong. We do maintain 256 Transmit Frame Descriptors, but they point to recycled buffers. We used to attach and de-attach different TFDs for the same buffer and it worked since they pointed to the same buffer. Also zero the number of BDs after unmapping a TFD. This seems not necessary since we don't reclaim the same TFD twice, but I like housekeeping. This patch solves this warning: [ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0() [ 6427.079859] Hardware name: Latitude E6410 [ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes] [ 6427.079870] Modules linked in: ... [ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G O 3.3.3 #5 [ 6427.079954] Call Trace: [ 6427.079963] [<c10337a2>] warn_slowpath_common+0x72/0xa0 [ 6427.079982] [<c1033873>] warn_slowpath_fmt+0x33/0x40 [ 6427.079988] [<c12dcb77>] check_unmap+0x727/0x7a0 [ 6427.079995] [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80 [ 6427.080024] [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi] [ 6427.080048] [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi] [ 6427.080071] [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi] [ 6427.080095] [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi] [ 6427.080113] [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi] [ 6427.080132] [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi] [ 6427.080168] [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211] [ 6427.080198] [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211] [ 6427.080243] [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211] [ 6427.080250] [<c148dac1>] __dev_close_many+0x81/0xd0 [ 6427.080270] [<c148db3d>] __dev_close+0x2d/0x50 [ 6427.080276] [<c148d152>] __dev_change_flags+0x82/0x150 [ 6427.080282] [<c148e3e3>] dev_change_flags+0x23/0x60 [ 6427.080289] [<c14f6320>] devinet_ioctl+0x6a0/0x770 [ 6427.080296] [<c14f8705>] inet_ioctl+0x95/0xb0 [ 6427.080304] [<c147a0f0>] sock_ioctl+0x70/0x270 Reported-by: Antonio Quartulli <ordex@autistici.org> Tested-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…condition commit 26c1917 upstream. When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3cf003c upstream. [The async read code was broadened to include uncached reads in 3.5, so the mainline patch did not apply directly. This patch is just a backport to account for that change.] Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee #10 [eed63f94] sys_write at c052df4c #11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db178 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bea6832 upstream. On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 160c942 upstream. Interface #5 on ZTE MF683 is a QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 412d32e upstream. A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a67adb9 upstream. The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [<c1203964>] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [<c10e20c3>] notify_change+0x25f/0x281 [ 139.924982] [<c10cbf56>] chmod_common+0x59/0x76 [ 139.924982] [<c10e27a1>] ? put_unused_fd+0x33/0x33 [ 139.924982] [<c10cca09>] sys_fchmod+0x39/0x5c [ 139.924982] [<c13f4f30>] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7a1dd6 upstream. The reason for this patch is crash in kmemdup caused by returning from get_callid with uniialized matchoff and matchlen. Removing Zero check of matchlen since it's done by ct_sip_get_header() BUG: unable to handle kernel paging request at ffff880457b5763f IP: [<ffffffff810df7fc>] kmemdup+0x2e/0x35 PGD 27f6067 PUD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: xt_state xt_helper nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle xt_connmark xt_conntrack ip6_tables nf_conntrack_ftp ip_vs_ftp nf_nat xt_tcpudp iptable_mangle xt_mark ip_tables x_tables ip_vs_rr ip_vs_lblcr ip_vs_pe_sip ip_vs nf_conntrack_sip nf_conntrack bonding igb i2c_algo_bit i2c_core CPU 5 Pid: 0, comm: swapper/5 Not tainted 3.9.0-rc5+ #5 /S1200KP RIP: 0010:[<ffffffff810df7fc>] [<ffffffff810df7fc>] kmemdup+0x2e/0x35 RSP: 0018:ffff8803fea03648 EFLAGS: 00010282 RAX: ffff8803d61063e0 RBX: 0000000000000003 RCX: 0000000000000003 RDX: 0000000000000003 RSI: ffff880457b5763f RDI: ffff8803d61063e0 RBP: ffff8803fea03658 R08: 0000000000000008 R09: 0000000000000011 R10: 0000000000000011 R11: 00ffffffff81a8a3 R12: ffff880457b5763f R13: ffff8803d67f786a R14: ffff8803fea03730 R15: ffffffffa0098e90 FS: 0000000000000000(0000) GS:ffff8803fea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff880457b5763f CR3: 0000000001a0c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/5 (pid: 0, threadinfo ffff8803ee18c000, task ffff8803ee18a480) Stack: ffff8803d822a080 000000000000001c ffff8803fea036c8 ffffffffa000937a ffffffff81f0d8a0 000000038135fdd5 ffff880300000014 ffff880300110000 ffffffff150118ac ffff8803d7e8a000 ffff88031e0118ac 0000000000000000 Call Trace: <IRQ> [<ffffffffa000937a>] ip_vs_sip_fill_param+0x13a/0x187 [ip_vs_pe_sip] [<ffffffffa007b209>] ip_vs_sched_persist+0x2c6/0x9c3 [ip_vs] [<ffffffff8107dc53>] ? __lock_acquire+0x677/0x1697 [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff810649bc>] ? sched_clock_cpu+0x43/0xcf [<ffffffffa007bb1e>] ip_vs_schedule+0x181/0x4ba [ip_vs] ... Signed-off-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Background Previously, if f2fs tries to move data blocks of an *evicting* inode during the cleaning process, it stops the process incompletely and then restarts the whole process, since it needs a locked inode to grab victim data pages in its address space. In order to get a locked inode, iget_locked() by f2fs_iget() is normally used, but, it waits if the inode is on freeing. So, here is a deadlock scenario. 1. f2fs_evict_inode() <- inode "A" 2. f2fs_balance_fs() 3. f2fs_gc() 4. gc_data_segment() 5. f2fs_iget() <- inode "A" too! If step #1 and #5 treat a same inode "A", step #5 would fall into deadlock since the inode "A" is on freeing. In order to resolve this, f2fs_iget_nowait() which skips __wait_on_freeing_inode() was introduced in step #5, and stops f2fs_gc() to complete f2fs_evict_inode(). 1. f2fs_evict_inode() <- inode "A" 2. f2fs_balance_fs() 3. f2fs_gc() 4. gc_data_segment() 5. f2fs_iget_nowait() <- inode "A", then stop f2fs_gc() w/ -ENOENT 2. Problem and Solution In the above scenario, however, f2fs cannot finish f2fs_evict_inode() only if: o there are not enough free sections, and o f2fs_gc() tries to move data blocks of the *evicting* inode repeatedly. So, the final solution is to use f2fs_iget() and remove f2fs_balance_fs() in f2fs_evict_inode(). The f2fs_evict_inode() actually truncates all the data and node blocks, which means that it doesn't produce any dirty node pages accordingly. So, we don't need to do f2fs_balance_fs() in practical. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

xfs_sync_worker checks the MS_ACTIVE flag in s_flags to avoid doing work during mount and unmount. This flag can be cleared by unmount after the xfs_sync_worker checks it but before the work is completed. The has caused crashes in the completion handler for the dummy transaction commited by xfs_sync_worker: PID: 27544 TASK: ffff88013544e040 CPU: 3 COMMAND: "kworker/3:0" #0 [ffff88016fdff930] machine_kexec at ffffffff810244e9 #1 [ffff88016fdff9a0] crash_kexec at ffffffff8108d053 #2 [ffff88016fdffa70] oops_end at ffffffff813ad1b8 #3 [ffff88016fdffaa0] no_context at ffffffff8102bd48 #4 [ffff88016fdffaf0] __bad_area_nosemaphore at ffffffff8102c04d #5 [ffff88016fdffb40] bad_area_nosemaphore at ffffffff8102c12e #6 [ffff88016fdffb50] do_page_fault at ffffffff813afaee #7 [ffff88016fdffc60] page_fault at ffffffff813ac635 [exception RIP: xlog_get_lowest_lsn+0x30] RIP: ffffffffa04a9910 RSP: ffff88016fdffd10 RFLAGS: 00010246 RAX: ffffc90014e48000 RBX: ffff88014d879980 RCX: ffff88014d879980 RDX: ffff8802214ee4c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88016fdffd10 R8: ffff88014d879a80 R9: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff8802214ee400 R13: ffff88014d879980 R14: 0000000000000000 R15: ffff88022fd96605 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff88016fdffd18] xlog_state_do_callback at ffffffffa04aa186 [xfs] #9 [ffff88016fdffd98] xlog_state_done_syncing at ffffffffa04aa568 [xfs] Protect xfs_sync_worker by using the s_umount semaphore at the read level to provide exclusion with unmount while work is progressing. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>

The logic that allows to have a short TFD queue was completely wrong. We do maintain 256 Transmit Frame Descriptors, but they point to recycled buffers. We used to attach and de-attach different TFDs for the same buffer and it worked since they pointed to the same buffer. Also zero the number of BDs after unmapping a TFD. This seems not necessary since we don't reclaim the same TFD twice, but I like housekeeping. This patch solves this warning: [ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0() [ 6427.079859] Hardware name: Latitude E6410 [ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes] [ 6427.079870] Modules linked in: ... [ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G O 3.3.3 #5 [ 6427.079954] Call Trace: [ 6427.079963] [<c10337a2>] warn_slowpath_common+0x72/0xa0 [ 6427.079982] [<c1033873>] warn_slowpath_fmt+0x33/0x40 [ 6427.079988] [<c12dcb77>] check_unmap+0x727/0x7a0 [ 6427.079995] [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80 [ 6427.080024] [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi] [ 6427.080048] [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi] [ 6427.080071] [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi] [ 6427.080095] [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi] [ 6427.080113] [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi] [ 6427.080132] [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi] [ 6427.080168] [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211] [ 6427.080198] [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211] [ 6427.080243] [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211] [ 6427.080250] [<c148dac1>] __dev_close_many+0x81/0xd0 [ 6427.080270] [<c148db3d>] __dev_close+0x2d/0x50 [ 6427.080276] [<c148d152>] __dev_change_flags+0x82/0x150 [ 6427.080282] [<c148e3e3>] dev_change_flags+0x23/0x60 [ 6427.080289] [<c14f6320>] devinet_ioctl+0x6a0/0x770 [ 6427.080296] [<c14f8705>] inet_ioctl+0x95/0xb0 [ 6427.080304] [<c147a0f0>] sock_ioctl+0x70/0x270 Cc: stable@vger.kernel.org Reported-by: Antonio Quartulli <ordex@autistici.org> Tested-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>

…condition When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The warning below triggers on AMD MCM packages because physical package IDs on the cores of a _physical_ socket are the same. I.e., this field says which CPUs belong to the same physical package. However, the same two CPUs belong to two different internal, i.e. "logical" nodes in the same physical socket which is reflected in the CPU-to-node map on x86 with NUMA. Which makes this check wrong on the above topologies so circumvent it. [ 0.444413] Booting Node 0, Processors #1 #2 #3 #4 #5 Ok. [ 0.461388] ------------[ cut here ]------------ [ 0.465997] WARNING: at arch/x86/kernel/smpboot.c:310 topology_sane.clone.1+0x6e/0x81() [ 0.473960] Hardware name: Dinar [ 0.477170] sched: CPU #6's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. [ 0.486860] Booting Node 1, Processors #6 [ 0.491104] Modules linked in: [ 0.494141] Pid: 0, comm: swapper/6 Not tainted 3.4.0+ #1 [ 0.499510] Call Trace: [ 0.501946] [<ffffffff8144bf92>] ? topology_sane.clone.1+0x6e/0x81 [ 0.508185] [<ffffffff8102f1fc>] warn_slowpath_common+0x85/0x9d [ 0.514163] [<ffffffff8102f2b7>] warn_slowpath_fmt+0x46/0x48 [ 0.519881] [<ffffffff8144bf92>] topology_sane.clone.1+0x6e/0x81 [ 0.525943] [<ffffffff8144c234>] set_cpu_sibling_map+0x251/0x371 [ 0.532004] [<ffffffff8144c4ee>] start_secondary+0x19a/0x218 [ 0.537729] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.628197] #7 #8 #9 #10 #11 Ok. [ 0.807108] Booting Node 3, Processors #12 #13 #14 #15 #16 #17 Ok. [ 0.897587] Booting Node 2, Processors #18 #19 #20 #21 #22 #23 Ok. [ 0.917443] Brought up 24 CPUs We ran a topology sanity check test we have here on it and it all looks ok... hopefully :). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120529135442.GE29157@aftab.osrc.amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee #10 [eed63f94] sys_write at c052df4c #11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db178 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Cc: <stable@vger.kernel.org> Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>

…d reasons We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org

On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This moves ARM over to the asm-generic/unaligned.h header. This has the benefit of better code generated especially for ARMv7 on gcc 4.7+ compilers. As Arnd Bergmann, points out: The asm-generic version uses the "struct" version for native-endian unaligned access and the "byteshift" version for the opposite endianess. The current ARM version however uses the "byteshift" implementation for both. Thanks to Nicolas Pitre for the excellent analysis: Test case: int foo (int *x) { return get_unaligned(x); } long long bar (long long *x) { return get_unaligned(x); } With the current ARM version: foo: ldrb r3, [r0, #2] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 2B], MEM[(const u8 *)x_1(D) + 2B] ldrb r1, [r0, #1] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 1B], MEM[(const u8 *)x_1(D) + 1B] ldrb r2, [r0, #0] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D)], MEM[(const u8 *)x_1(D)] mov r3, r3, asl #16 @ tmp154, MEM[(const u8 *)x_1(D) + 2B], ldrb r0, [r0, #3] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 3B], MEM[(const u8 *)x_1(D) + 3B] orr r3, r3, r1, asl #8 @, tmp155, tmp154, MEM[(const u8 *)x_1(D) + 1B], orr r3, r3, r2 @ tmp157, tmp155, MEM[(const u8 *)x_1(D)] orr r0, r3, r0, asl #24 @,, tmp157, MEM[(const u8 *)x_1(D) + 3B], bx lr @ bar: stmfd sp!, {r4, r5, r6, r7} @, mov r2, #0 @ tmp184, ldrb r5, [r0, #6] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 6B], MEM[(const u8 *)x_1(D) + 6B] ldrb r4, [r0, #5] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 5B], MEM[(const u8 *)x_1(D) + 5B] ldrb ip, [r0, #2] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 2B], MEM[(const u8 *)x_1(D) + 2B] ldrb r1, [r0, #4] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 4B], MEM[(const u8 *)x_1(D) + 4B] mov r5, r5, asl #16 @ tmp175, MEM[(const u8 *)x_1(D) + 6B], ldrb r7, [r0, #1] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 1B], MEM[(const u8 *)x_1(D) + 1B] orr r5, r5, r4, asl #8 @, tmp176, tmp175, MEM[(const u8 *)x_1(D) + 5B], ldrb r6, [r0, #7] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 7B], MEM[(const u8 *)x_1(D) + 7B] orr r5, r5, r1 @ tmp178, tmp176, MEM[(const u8 *)x_1(D) + 4B] ldrb r4, [r0, #0] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D)], MEM[(const u8 *)x_1(D)] mov ip, ip, asl #16 @ tmp188, MEM[(const u8 *)x_1(D) + 2B], ldrb r1, [r0, #3] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 3B], MEM[(const u8 *)x_1(D) + 3B] orr ip, ip, r7, asl #8 @, tmp189, tmp188, MEM[(const u8 *)x_1(D) + 1B], orr r3, r5, r6, asl #24 @,, tmp178, MEM[(const u8 *)x_1(D) + 7B], orr ip, ip, r4 @ tmp191, tmp189, MEM[(const u8 *)x_1(D)] orr ip, ip, r1, asl #24 @, tmp194, tmp191, MEM[(const u8 *)x_1(D) + 3B], mov r1, r3 @, orr r0, r2, ip @ tmp171, tmp184, tmp194 ldmfd sp!, {r4, r5, r6, r7} bx lr In both cases the code is slightly suboptimal. One may wonder why wasting r2 with the constant 0 in the second case for example. And all the mov's could be folded in subsequent orr's, etc. Now with the asm-generic version: foo: ldr r0, [r0, #0] @ unaligned @,* x bx lr @ bar: mov r3, r0 @ x, x ldr r0, [r0, #0] @ unaligned @,* x ldr r1, [r3, #4] @ unaligned @, bx lr @ This is way better of course, but only because this was compiled for ARMv7. In this case the compiler knows that the hardware can do unaligned word access. This isn't that obvious for foo(), but if we remove the get_unaligned() from bar as follows: long long bar (long long *x) {return *x; } then the resulting code is: bar: ldmia r0, {r0, r1} @ x,, bx lr @ So this proves that the presumed aligned vs unaligned cases does have influence on the instructions the compiler may use and that the above unaligned code results are not just an accident. Still... this isn't fully conclusive without at least looking at the resulting assembly fron a pre ARMv6 compilation. Let's see with an ARMv5 target: foo: ldrb r3, [r0, #0] @ zero_extendqisi2 @ tmp139,* x ldrb r1, [r0, #1] @ zero_extendqisi2 @ tmp140, ldrb r2, [r0, #2] @ zero_extendqisi2 @ tmp143, ldrb r0, [r0, #3] @ zero_extendqisi2 @ tmp146, orr r3, r3, r1, asl #8 @, tmp142, tmp139, tmp140, orr r3, r3, r2, asl #16 @, tmp145, tmp142, tmp143, orr r0, r3, r0, asl #24 @,, tmp145, tmp146, bx lr @ bar: stmfd sp!, {r4, r5, r6, r7} @, ldrb r2, [r0, #0] @ zero_extendqisi2 @ tmp139,* x ldrb r7, [r0, #1] @ zero_extendqisi2 @ tmp140, ldrb r3, [r0, #4] @ zero_extendqisi2 @ tmp149, ldrb r6, [r0, #5] @ zero_extendqisi2 @ tmp150, ldrb r5, [r0, #2] @ zero_extendqisi2 @ tmp143, ldrb r4, [r0, #6] @ zero_extendqisi2 @ tmp153, ldrb r1, [r0, #7] @ zero_extendqisi2 @ tmp156, ldrb ip, [r0, #3] @ zero_extendqisi2 @ tmp146, orr r2, r2, r7, asl #8 @, tmp142, tmp139, tmp140, orr r3, r3, r6, asl #8 @, tmp152, tmp149, tmp150, orr r2, r2, r5, asl #16 @, tmp145, tmp142, tmp143, orr r3, r3, r4, asl #16 @, tmp155, tmp152, tmp153, orr r0, r2, ip, asl #24 @,, tmp145, tmp146, orr r1, r3, r1, asl #24 @,, tmp155, tmp156, ldmfd sp!, {r4, r5, r6, r7} bx lr Compared to the initial results, this is really nicely optimized and I couldn't do much better if I were to hand code it myself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fixes following lockdep splat : [ 1614.734896] ============================================= [ 1614.734898] [ INFO: possible recursive locking detected ] [ 1614.734901] 3.6.0-rc3+ #782 Not tainted [ 1614.734903] --------------------------------------------- [ 1614.734905] swapper/11/0 is trying to acquire lock: [ 1614.734907] (slock-AF_INET){+.-...}, at: [<ffffffffa0209d72>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.734920] [ 1614.734920] but task is already holding lock: [ 1614.734922] (slock-AF_INET){+.-...}, at: [<ffffffff815fce23>] tcp_v4_err+0x163/0x6b0 [ 1614.734932] [ 1614.734932] other info that might help us debug this: [ 1614.734935] Possible unsafe locking scenario: [ 1614.734935] [ 1614.734937] CPU0 [ 1614.734938] ---- [ 1614.734940] lock(slock-AF_INET); [ 1614.734943] lock(slock-AF_INET); [ 1614.734946] [ 1614.734946] *** DEADLOCK *** [ 1614.734946] [ 1614.734949] May be due to missing lock nesting notation [ 1614.734949] [ 1614.734952] 7 locks held by swapper/11/0: [ 1614.734954] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff81592801>] __netif_receive_skb+0x251/0xd00 [ 1614.734964] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff815d319c>] ip_local_deliver_finish+0x4c/0x4e0 [ 1614.734972] #2: (rcu_read_lock){.+.+..}, at: [<ffffffff8160d116>] icmp_socket_deliver+0x46/0x230 [ 1614.734982] #3: (slock-AF_INET){+.-...}, at: [<ffffffff815fce23>] tcp_v4_err+0x163/0x6b0 [ 1614.734989] #4: (rcu_read_lock){.+.+..}, at: [<ffffffff815da240>] ip_queue_xmit+0x0/0x680 [ 1614.734997] #5: (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9925>] ip_finish_output+0x135/0x890 [ 1614.735004] #6: (rcu_read_lock_bh){.+....}, at: [<ffffffff81595680>] dev_queue_xmit+0x0/0xe00 [ 1614.735012] [ 1614.735012] stack backtrace: [ 1614.735016] Pid: 0, comm: swapper/11 Not tainted 3.6.0-rc3+ #782 [ 1614.735018] Call Trace: [ 1614.735020] <IRQ> [<ffffffff810a50ac>] __lock_acquire+0x144c/0x1b10 [ 1614.735033] [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0 [ 1614.735037] [<ffffffff810a6762>] ? mark_held_locks+0x82/0x130 [ 1614.735042] [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [ 1614.735047] [<ffffffffa0209d72>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735051] [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10 [ 1614.735060] [<ffffffff81749b31>] _raw_spin_lock+0x41/0x50 [ 1614.735065] [<ffffffffa0209d72>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735069] [<ffffffffa0209d72>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735075] [<ffffffffa014f7f2>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [ 1614.735079] [<ffffffff81595112>] dev_hard_start_xmit+0x502/0xa70 [ 1614.735083] [<ffffffff81594c6e>] ? dev_hard_start_xmit+0x5e/0xa70 [ 1614.735087] [<ffffffff815957c1>] ? dev_queue_xmit+0x141/0xe00 [ 1614.735093] [<ffffffff815b622e>] sch_direct_xmit+0xfe/0x290 [ 1614.735098] [<ffffffff81595865>] dev_queue_xmit+0x1e5/0xe00 [ 1614.735102] [<ffffffff81595680>] ? dev_hard_start_xmit+0xa70/0xa70 [ 1614.735106] [<ffffffff815b4daa>] ? eth_header+0x3a/0xf0 [ 1614.735111] [<ffffffff8161d33e>] ? fib_get_table+0x2e/0x280 [ 1614.735117] [<ffffffff8160a7e2>] arp_xmit+0x22/0x60 [ 1614.735121] [<ffffffff8160a863>] arp_send+0x43/0x50 [ 1614.735125] [<ffffffff8160b82f>] arp_solicit+0x18f/0x450 [ 1614.735132] [<ffffffff8159d9da>] neigh_probe+0x4a/0x70 [ 1614.735137] [<ffffffff815a191a>] __neigh_event_send+0xea/0x300 [ 1614.735141] [<ffffffff815a1c93>] neigh_resolve_output+0x163/0x260 [ 1614.735146] [<ffffffff815d9cf5>] ip_finish_output+0x505/0x890 [ 1614.735150] [<ffffffff815d9925>] ? ip_finish_output+0x135/0x890 [ 1614.735154] [<ffffffff815dae79>] ip_output+0x59/0xf0 [ 1614.735158] [<ffffffff815da1cd>] ip_local_out+0x2d/0xa0 [ 1614.735162] [<ffffffff815da403>] ip_queue_xmit+0x1c3/0x680 [ 1614.735165] [<ffffffff815da240>] ? ip_local_out+0xa0/0xa0 [ 1614.735172] [<ffffffff815f4402>] tcp_transmit_skb+0x402/0xa60 [ 1614.735177] [<ffffffff815f5a11>] tcp_retransmit_skb+0x1a1/0x620 [ 1614.735181] [<ffffffff815f7e93>] tcp_retransmit_timer+0x393/0x960 [ 1614.735185] [<ffffffff815fce23>] ? tcp_v4_err+0x163/0x6b0 [ 1614.735189] [<ffffffff815fd317>] tcp_v4_err+0x657/0x6b0 [ 1614.735194] [<ffffffff8160d116>] ? icmp_socket_deliver+0x46/0x230 [ 1614.735199] [<ffffffff8160d19e>] icmp_socket_deliver+0xce/0x230 [ 1614.735203] [<ffffffff8160d116>] ? icmp_socket_deliver+0x46/0x230 [ 1614.735208] [<ffffffff8160d464>] icmp_unreach+0xe4/0x2c0 [ 1614.735213] [<ffffffff8160e520>] icmp_rcv+0x350/0x4a0 [ 1614.735217] [<ffffffff815d3285>] ip_local_deliver_finish+0x135/0x4e0 [ 1614.735221] [<ffffffff815d319c>] ? ip_local_deliver_finish+0x4c/0x4e0 [ 1614.735225] [<ffffffff815d3ffa>] ip_local_deliver+0x4a/0x90 [ 1614.735229] [<ffffffff815d37b7>] ip_rcv_finish+0x187/0x730 [ 1614.735233] [<ffffffff815d425d>] ip_rcv+0x21d/0x300 [ 1614.735237] [<ffffffff81592a1b>] __netif_receive_skb+0x46b/0xd00 [ 1614.735241] [<ffffffff81592801>] ? __netif_receive_skb+0x251/0xd00 [ 1614.735245] [<ffffffff81593368>] process_backlog+0xb8/0x180 [ 1614.735249] [<ffffffff81593cf9>] net_rx_action+0x159/0x330 [ 1614.735257] [<ffffffff810491f0>] __do_softirq+0xd0/0x3e0 [ 1614.735264] [<ffffffff8109ed24>] ? tick_program_event+0x24/0x30 [ 1614.735270] [<ffffffff8175419c>] call_softirq+0x1c/0x30 [ 1614.735278] [<ffffffff8100425d>] do_softirq+0x8d/0xc0 [ 1614.735282] [<ffffffff8104983e>] irq_exit+0xae/0xe0 [ 1614.735287] [<ffffffff8175494e>] smp_apic_timer_interrupt+0x6e/0x99 [ 1614.735291] [<ffffffff81753a1c>] apic_timer_interrupt+0x6c/0x80 [ 1614.735293] <EOI> [<ffffffff810a14ad>] ? trace_hardirqs_off+0xd/0x10 [ 1614.735306] [<ffffffff81336f85>] ? intel_idle+0xf5/0x150 [ 1614.735310] [<ffffffff81336f7e>] ? intel_idle+0xee/0x150 [ 1614.735317] [<ffffffff814e6ea9>] cpuidle_enter+0x19/0x20 [ 1614.735321] [<ffffffff814e7538>] cpuidle_idle_call+0xa8/0x630 [ 1614.735327] [<ffffffff8100c1ba>] cpu_idle+0x8a/0xe0 [ 1614.735333] [<ffffffff8173762e>] start_secondary+0x220/0x222 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Use spin_lock_irq() to quiet warning: [ 8.232324] BUG: spinlock trylock failure on UP on CPU#0, reboot/85 [ 8.234138] lock: c161c760, .magic: dead4ead, .owner: reboot/85, .owner_cpu: 0 [ 8.236132] Pid: 85, comm: reboot Not tainted 3.4.0-rc7-00656-g82163ed #5 [ 8.237965] Call Trace: [ 8.238648] [<c13dfd20>] ? printk+0x18/0x1a [ 8.239827] [<c122a5e0>] spin_dump+0x80/0xd0 [ 8.241016] [<c122a652>] spin_bug+0x22/0x30 [ 8.242181] [<c122a93b>] do_raw_spin_trylock+0x5b/0x70 [ 8.243611] [<c13e8bae>] _raw_spin_trylock+0xe/0x60 [ 8.244975] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 ==> [ 8.246638] [<c13922ea>] panel_scan_timer+0xba/0x570 [ 8.248019] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 [ 8.249689] [<c102f6f5>] run_timer_softirq+0x1e5/0x370 [ 8.251191] [<c102f645>] ? run_timer_softirq+0x135/0x370 [ 8.252718] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 [ 8.254462] [<c102a592>] __do_softirq+0xc2/0x1c0 [ 8.255758] [<c102a4d0>] ? local_bh_enable_ip+0x130/0x130 [ 8.257228] <IRQ> [<c102a855>] ? irq_exit+0x65/0x70 [ 8.258647] [<c1013ff9>] ? smp_apic_timer_interrupt+0x49/0x80 [ 8.260226] [<c13e96c1>] ? apic_timer_interrupt+0x31/0x38 [ 8.261737] [<c12700e0>] ? drm_vm_open_locked+0x70/0xb0 [ 8.263166] [<c122489a>] ? delay_tsc+0x1a/0x30 [ 8.264452] [<c12248c9>] ? __delay+0x9/0x10 [ 8.265621] [<c12248ec>] ? __const_udelay+0x1c/0x20 ==> [ 8.266967] [<c139136c>] ? lcd_clear_fast_p8+0x9c/0xe0 [ 8.268386] [<c1391a66>] ? lcd_write+0x226/0x810 [ 8.269653] [<c1367900>] ? md_set_readonly+0xc0/0xc0 [ 8.271013] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0 [ 8.272470] [<c1392a98>] ? panel_lcd_print+0x38/0x40 [ 8.273837] [<c1392ace>] ? panel_notify_sys+0x2e/0x60 [ 8.275224] [<c1046634>] ? notifier_call_chain+0x84/0xb0 [ 8.276754] [<c10469ce>] ? __blocking_notifier_call_chain+0x3e/0x60 [ 8.278576] [<c1046a0a>] ? blocking_notifier_call_chain+0x1a/0x20 [ 8.280267] [<c1036a14>] ? kernel_restart_prepare+0x14/0x40 [ 8.281901] [<c1036a8e>] ? kernel_restart+0xe/0x50 [ 8.283216] [<c1036ce9>] ? sys_reboot+0x149/0x1e0 [ 8.284532] [<c10b3fb3>] ? handle_pte_fault+0x93/0xd70 [ 8.285956] [<c1019e35>] ? do_page_fault+0x215/0x5e0 [ 8.287330] [<c101a113>] ? do_page_fault+0x4f3/0x5e0 [ 8.288704] [<c1045ac6>] ? up_read+0x16/0x30 [ 8.289890] [<c101a113>] ? do_page_fault+0x4f3/0x5e0 [ 8.291252] [<c10d4486>] ? iterate_supers+0x86/0xd0 [ 8.292615] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0 [ 8.294049] [<c13e8dcd>] ? _raw_spin_unlock+0x1d/0x20 [ 8.295449] [<c10d44ab>] ? iterate_supers+0xab/0xd0 [ 8.296795] [<c10fb620>] ? __sync_filesystem+0xa0/0xa0 [ 8.298199] [<c13e9b03>] ? sysenter_do_call+0x12/0x37 [ 8.306899] Restarting system. [ 8.307747] machine restart Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cancel work of the xfs_sync_worker before teardown of the log in xfs_unmountfs. This prevents occasional crashes on unmount like so: PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3" #0 [c5377d28] crash_kexec at c0292c94 #1 [c5377d80] oops_end at c07090c2 #2 [c5377d98] no_context at c06f614e #3 [c5377dbc] __bad_area_nosemaphore at c06f6281 #4 [c5377df4] bad_area_nosemaphore at c06f629b #5 [c5377e00] do_page_fault at c070b0cb #6 [c5377e7c] error_code (via page_fault) at c070892c EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0 DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20 CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246 #7 [c5377eb0] atomic64_read_cx8 at c0481ad0 #8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs] #9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs] #10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs] #11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs] #12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs] #13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs] #14 [c5377f58] process_one_work at c024ee4c #15 [c5377f98] worker_thread at c024f43d #16 [c5377fbc] kthread at c025326b #17 [c5377fe8] kernel_thread_helper at c070e834 PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount" #0 [cde0fda0] __schedule at c0706595 #1 [cde0fe28] schedule at c0706b89 #2 [cde0fe30] schedule_timeout at c0705600 #3 [cde0fe94] __down_common at c0706098 #4 [cde0fec8] __down at c0706122 #5 [cde0fed0] down at c025936f #6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs] #7 [cde0ff00] xfs_freesb at f7cc2236 [xfs] #8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs] #9 [cde0ff1c] generic_shutdown_super at c0333d7a #10 [cde0ff38] kill_block_super at c0333e0f #11 [cde0ff48] deactivate_locked_super at c0334218 #12 [cde0ff58] deactivate_super at c033495d #13 [cde0ff68] mntput_no_expire at c034bc13 #14 [cde0ff7c] sys_umount at c034cc69 #15 [cde0ffa0] sys_oldumount at c034ccd4 #16 [cde0ffb0] system_call at c0707e66 commit 11159a0 added this to xfs_log_unmount and needs to be cleaned up at a later date. Signed-off-by: Ben Myers <bpm@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com>

One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>

Interface #5 on ZTE MF683 is a QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f7021a "cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()" caused a regression in CPU hotplug, because it lead to a deadlock between cpufreq governor worker thread and the CPU hotplug writer task. Lockdep splat corresponding to this deadlock is shown below: [ 60.277396] ====================================================== [ 60.277400] [ INFO: possible circular locking dependency detected ] [ 60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted [ 60.277411] ------------------------------------------------------- [ 60.277417] bash/2225 is trying to acquire lock: [ 60.277422] ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280 [ 60.277444] but task is already holding lock: [ 60.277449] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.277465] which lock already depends on the new lock. [ 60.277472] the existing dependency chain (in reverse order) is: [ 60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}: [ 60.277490] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277503] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277514] [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60 [ 60.277522] [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0 [ 60.277532] [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0 [ 60.277543] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277552] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277560] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277569] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}: [ 60.277592] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277600] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277608] [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0 [ 60.277616] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277624] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277633] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277640] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}: [ 60.277661] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.277669] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277677] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.277685] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.277693] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.277701] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.277709] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.277719] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.277728] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.277737] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.277747] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.277759] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.277768] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.277779] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.277788] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.277796] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.277806] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.277818] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.277826] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.277834] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.277842] other info that might help us debug this: [ 60.277848] Chain exists of: (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock [ 60.277864] Possible unsafe locking scenario: [ 60.277869] CPU0 CPU1 [ 60.277873] ---- ---- [ 60.277877] lock(cpu_hotplug.lock); [ 60.277885] lock(&j_cdbs->timer_mutex); [ 60.277892] lock(cpu_hotplug.lock); [ 60.277900] lock((&(&j_cdbs->work)->work)); [ 60.277907] *** DEADLOCK *** [ 60.277915] 6 locks held by bash/2225: [ 60.277919] #0: (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0 [ 60.277937] #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150 [ 60.277954] #2: (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150 [ 60.277972] #3: (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20 [ 60.277990] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50 [ 60.278007] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.278023] stack backtrace: [ 60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 [ 60.278037] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011 [ 60.278042] ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38 [ 60.278055] ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2 [ 60.278068] ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00 [ 60.278081] Call Trace: [ 60.278091] [<ffffffff815b3d90>] dump_stack+0x19/0x1b [ 60.278101] [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5 [ 60.278111] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.278123] [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80 [ 60.278134] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.278142] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278151] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.278159] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278169] [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140 [ 60.278178] [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120 [ 60.278188] [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 60.278196] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.278206] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.278214] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.278225] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.278234] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.278244] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.278255] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.278265] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.278275] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.278284] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.278292] [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20 [ 60.278302] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.278311] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.278320] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.278329] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.278337] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.278347] [<ffffffff81185950>] ? fget_light+0x320/0x4b0 [ 60.278355] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.278364] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.280582] smpboot: CPU 1 is now offline The intention of that commit was to avoid warnings during CPU hotplug, which indicated that offline CPUs were getting IPIs from the cpufreq governor's work items. But the real root-cause of that problem was commit a66b2e5 (cpufreq: Preserve sysfs files across suspend/resume) because it totally skipped all the cpufreq callbacks during CPU hotplug in the suspend/resume path, and hence it never actually shut down the cpufreq governor's worker threads during CPU offline in the suspend/resume path. Reflecting back, the reason why we never suspected that commit as the root-cause earlier, was that the original issue was reported with just the halt command and nobody had brought in suspend/resume to the equation. The reason for _that_ in turn, as it turns out, is that earlier halt/shutdown was being done by disabling non-boot CPUs while tasks were frozen, just like suspend/resume.... but commit cf7df37 (reboot: migrate shutdown/reboot to boot cpu) which came somewhere along that very same time changed that logic: shutdown/halt no longer takes CPUs offline. Thus, the test-cases for reproducing the bug were vastly different and thus we went totally off the trail. Overall, it was one hell of a confusion with so many commits affecting each other and also affecting the symptoms of the problems in subtle ways. Finally, now since the original problematic commit (a66b2e5) has been completely reverted, revert this intermediate fix too (2f7021a), to fix the CPU hotplug deadlock. Phew! Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commits 6a1c068 and 9356b53, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. CC: <stable@vger.kernel.org> Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

In several places, this snippet is used when removing neigh entries: list_del(&neigh->list); ipoib_neigh_free(neigh); The list_del() removes neigh from the associated struct ipoib_path, while ipoib_neigh_free() removes neigh from the device's neigh entry lookup table. Both of these operations are protected by the priv->lock spinlock. The table however is also protected via RCU, and so naturally the lock is not held when doing reads. This leads to a race condition, in which a thread may successfully look up a neigh entry that has already been deleted from neigh->list. Since the previous deletion will have marked the entry with poison, a second list_del() on the object will cause a panic: #5 [ffff8802338c3c70] general_protection at ffffffff815108c5 [exception RIP: list_del+16] RIP: ffffffff81289020 RSP: ffff8802338c3d20 RFLAGS: 00010082 RAX: dead000000200200 RBX: ffff880433e60c88 RCX: 0000000000009e6c RDX: 0000000000000246 RSI: ffff8806012ca298 RDI: ffff880433e60c88 RBP: ffff8802338c3d30 R8: ffff8806012ca2e8 R9: 00000000ffffffff R10: 0000000000000001 R11: 0000000000000000 R12: ffff8804346b2020 R13: ffff88032a3e7540 R14: ffff8804346b26e0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #6 [ffff8802338c3d38] ipoib_cm_tx_handler at ffffffffa066fe0a [ib_ipoib] #7 [ffff8802338c3d98] cm_process_work at ffffffffa05149a7 [ib_cm] #8 [ffff8802338c3de8] cm_work_handler at ffffffffa05161aa [ib_cm] #9 [ffff8802338c3e38] worker_thread at ffffffff81090e10 #10 [ffff8802338c3ee8] kthread at ffffffff81096c66 #11 [ffff8802338c3f48] kernel_thread at ffffffff8100c0ca We move the list_del() into ipoib_neigh_free(), so that deletion happens only once, after the entry has been successfully removed from the lookup table. This same behavior is already used in ipoib_del_neighs_by_gid() and __ipoib_reap_neigh(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

Pull SCSI target fixes from Nicholas Bellinger: "The first patch is to address a long standing issue where INQUIRY vendor + model response data was not correctly padded with ASCII spaces, causing MSFT and Falconstor multipath stacks to not function with our LUNs. The second -> forth patches are additional iscsi-target regression fixes for the post >= v3.10 iser-target changes. The second and third are failure cases that have appeared during further testing, and the forth is only reproducible with malformed NOP packets. The fifth patch is a v3.11 specific regression caused by a recent optimization that showed up during WRITE I/O failure testing. I'll be sending Patch #1 and Patch #5 to Greg-KH separately for stable" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix se_cmd->state_list leak regression during WRITE failure iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject iscsi-target: Fix iscsit_transport reference leak during NP thread reset iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10 target: Fix trailing ASCII space usage in INQUIRY vendor+model

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

When parsing lines from objdump a line containing source code starting with a numeric label is mistaken for a line of disassembly starting with a memory address. Current validation fails to recognise that the "memory address" is out of range and calculates an invalid offset which later causes this segfault: Program received signal SIGSEGV, Segmentation fault. 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 631 hits += h->addr[offset++]; (gdb) bt #0 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 #1 0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364 #2 0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672 #3 0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962 #4 0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823 #5 0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt= 0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659 #6 0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1950 #7 0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581 #8 0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965 #9 0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521 After the fix is applied the symbol can be annotated showing the problematic line "1: rep" copy_user_generic_string /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux */ ENTRY(copy_user_generic_string) CFI_STARTPROC ASM_STAC andl %edx,%edx and %edx,%edx jz 4f je 37 cmpl $8,%edx cmp $0x8,%edx jb 2f /* less than 8 bytes, go to byte copy loop */ jb 33 ALIGN_DESTINATION mov %edi,%ecx and $0x7,%ecx je 28 sub $0x8,%ecx neg %ecx sub %ecx,%edx 1a: mov (%rsi),%al mov %al,(%rdi) inc %rsi inc %rdi dec %ecx jne 1a movl %edx,%ecx 28: mov %edx,%ecx shrl $3,%ecx shr $0x3,%ecx andl $7,%edx and $0x7,%edx 1: rep 100.00 rep movsq %ds:(%rsi),%es:(%rdi) movsq 2: movl %edx,%ecx 33: mov %edx,%ecx 3: rep rep movsb %ds:(%rsi),%es:(%rdi) movsb 4: xorl %eax,%eax 37: xor %eax,%eax data32 xchg %ax,%ax ASM_CLAC ret retq Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some ARC SMP systems lack native atomic R-M-W (LLOCK/SCOND) insns and can only use atomic EX insn (reg with mem) to build higher level R-M-W primitives. This includes a SystemC based SMP simulation model. So rwlocks need to use a protecting spinlock for atomic cmp-n-exchange operation to update reader(s)/writer count. The spinlock operation itself looks as follows: mov reg, 1 ; 1=locked, 0=unlocked retry: EX reg, [lock] ; load existing, store 1, atomically BREQ reg, 1, rety ; if already locked, retry In single-threaded simulation, SystemC alternates between the 2 cores with "N" insn each based scheduling. Additionally for insn with global side effect, such as EX writing to shared mem, a core switch is enforced too. Given that, 2 cores doing a repeated EX on same location, Linux often got into a livelock e.g. when both cores were fiddling with tasklist lock (gdbserver / hackbench) for read/write respectively as the sequence diagram below shows: core1 core2 -------- -------- 1. spin lock [EX r=0, w=1] - LOCKED 2. rwlock(Read) - LOCKED 3. spin unlock [ST 0] - UNLOCKED spin lock [EX r=0,w=1] - LOCKED -- resched core 1---- 5. spin lock [EX r=1] - ALREADY-LOCKED -- resched core 2---- 6. rwlock(Write) - READER-LOCKED 7. spin unlock [ST 0] 8. rwlock failed, retry again 9. spin lock [EX r=0, w=1] -- resched core 1---- 10 spinlock locked in #9, retry #5 11. spin lock [EX gets 1] -- resched core 2---- ... ... The fix was to unlock using the EX insn too (step 7), to trigger another SystemC scheduling pass which would let core1 proceed, eliding the livelock. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.644008] smpboot: Booting Node 1, Processors: #8 #9 #10 #11 #12 #13 #14 #15 OK [ 1.245006] smpboot: Booting Node 2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK [ 1.864005] smpboot: Booting Node 3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK [ 2.489005] smpboot: Booting Node 4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK [ 3.093005] smpboot: Booting Node 5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK [ 3.698005] smpboot: Booting Node 6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK [ 4.304005] smpboot: Booting Node 7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

The recent 3.12 pull request for apparmor was missing a couple rcu _protected access modifiers. Resulting in the follow suspicious RCU usage [ 29.804534] [ INFO: suspicious RCU usage. ] [ 29.804539] 3.11.0+ #5 Not tainted [ 29.804541] ------------------------------- [ 29.804545] security/apparmor/include/policy.h:363 suspicious rcu_dereference_check() usage! [ 29.804548] [ 29.804548] other info that might help us debug this: [ 29.804548] [ 29.804553] [ 29.804553] rcu_scheduler_active = 1, debug_locks = 1 [ 29.804558] 2 locks held by apparmor_parser/1268: [ 29.804560] #0: (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29 [ 29.804576] #1: (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c [ 29.804589] [ 29.804589] stack backtrace: [ 29.804595] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5 [ 29.804599] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010 [ 29.804602] 0000000000000000 ffff8800b95a1d90 ffffffff8144eb9b ffff8800b94db540 [ 29.804611] ffff8800b95a1dc0 ffffffff81087439 ffff880138cc3a18 ffff880138cc3a18 [ 29.804619] ffff8800b9464a90 ffff880138cc3a38 ffff8800b95a1df0 ffffffff811f5084 [ 29.804628] Call Trace: [ 29.804636] [<ffffffff8144eb9b>] dump_stack+0x4e/0x82 [ 29.804642] [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105 [ 29.804649] [<ffffffff811f5084>] __aa_update_replacedby+0x53/0x7f [ 29.804655] [<ffffffff811f5408>] __replace_profile+0x11f/0x1ed [ 29.804661] [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c [ 29.804668] [<ffffffff811f16d4>] profile_replace+0x35/0x4c [ 29.804674] [<ffffffff81120fa3>] vfs_write+0xad/0x113 [ 29.804680] [<ffffffff81121609>] SyS_write+0x44/0x7a [ 29.804687] [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b [ 29.804691] [ 29.804694] =============================== [ 29.804697] [ INFO: suspicious RCU usage. ] [ 29.804700] 3.11.0+ #5 Not tainted [ 29.804703] ------------------------------- [ 29.804706] security/apparmor/policy.c:566 suspicious rcu_dereference_check() usage! [ 29.804709] [ 29.804709] other info that might help us debug this: [ 29.804709] [ 29.804714] [ 29.804714] rcu_scheduler_active = 1, debug_locks = 1 [ 29.804718] 2 locks held by apparmor_parser/1268: [ 29.804721] #0: (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29 [ 29.804733] #1: (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c [ 29.804744] [ 29.804744] stack backtrace: [ 29.804750] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5 [ 29.804753] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010 [ 29.804756] 0000000000000000 ffff8800b95a1d80 ffffffff8144eb9b ffff8800b94db540 [ 29.804764] ffff8800b95a1db0 ffffffff81087439 ffff8800b95b02b0 0000000000000000 [ 29.804772] ffff8800b9efba08 ffff880138cc3a38 ffff8800b95a1dd0 ffffffff811f4f94 [ 29.804779] Call Trace: [ 29.804786] [<ffffffff8144eb9b>] dump_stack+0x4e/0x82 [ 29.804791] [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105 [ 29.804798] [<ffffffff811f4f94>] aa_free_replacedby_kref+0x4d/0x62 [ 29.804804] [<ffffffff811f4f47>] ? aa_put_namespace+0x17/0x17 [ 29.804810] [<ffffffff811f4f0b>] kref_put+0x36/0x40 [ 29.804816] [<ffffffff811f5423>] __replace_profile+0x13a/0x1ed [ 29.804822] [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c [ 29.804829] [<ffffffff811f16d4>] profile_replace+0x35/0x4c [ 29.804835] [<ffffffff81120fa3>] vfs_write+0xad/0x113 [ 29.804840] [<ffffffff81121609>] SyS_write+0x44/0x7a [ 29.804847] [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b Reported-by: miles.lane@gmail.com CC: paulmck@linux.vnet.ibm.com Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>

Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit f112a04)

Booting a mx6 with CONFIG_PROVE_LOCKING we get: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-rc4-next-20131009+ #34 Not tainted ------------------------------------------------------- swapper/0/1 is trying to acquire lock: (&imx_drm_device->mutex){+.+.+.}, at: [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98 but task is already holding lock: (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&crtc->mutex){+.+...}: [<800777d0>] __lock_acquire+0x18d4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805ead5c>] _mutex_lock_nest_lock+0x58/0x3a8 [<802fec50>] drm_crtc_init+0x48/0xa8 [<80457c88>] imx_drm_add_crtc+0xd4/0x144 [<8045e2e8>] ipu_drm_probe+0x114/0x1fc [<80312278>] platform_drv_probe+0x20/0x50 [<80310c68>] driver_probe_device+0x110/0x22c [<80310e20>] __driver_attach+0x9c/0xa0 [<8030f218>] bus_for_each_dev+0x5c/0x90 [<80310750>] driver_attach+0x20/0x28 [<8031034c>] bus_add_driver+0xdc/0x1dc [<803114d8>] driver_register+0x80/0xfc [<80312198>] __platform_driver_register+0x50/0x64 [<808172fc>] ipu_drm_driver_init+0x18/0x20 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c -> #1 (&dev->mode_config.mutex){+.+.+.}: [<800777d0>] __lock_acquire+0x18d4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805eb100>] mutex_lock_nested+0x54/0x3a4 [<802fe758>] drm_modeset_lock_all+0x20/0x54 [<802fead4>] drm_encoder_init+0x20/0x7c [<80457ae4>] imx_drm_add_encoder+0x88/0xec [<80459838>] imx_ldb_probe+0x344/0x4fc [<80312278>] platform_drv_probe+0x20/0x50 [<80310c68>] driver_probe_device+0x110/0x22c [<80310e20>] __driver_attach+0x9c/0xa0 [<8030f218>] bus_for_each_dev+0x5c/0x90 [<80310750>] driver_attach+0x20/0x28 [<8031034c>] bus_add_driver+0xdc/0x1dc [<803114d8>] driver_register+0x80/0xfc [<80312198>] __platform_driver_register+0x50/0x64 [<8081722c>] imx_ldb_driver_init+0x18/0x20 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c -> #0 (&imx_drm_device->mutex){+.+.+.}: [<805e510c>] print_circular_bug+0x74/0x2e0 [<80077ad0>] __lock_acquire+0x1bd4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805eb100>] mutex_lock_nested+0x54/0x3a4 [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98 [<80459a98>] imx_ldb_encoder_prepare+0x34/0x114 [<802ef724>] drm_crtc_helper_set_mode+0x1f0/0x4c0 [<802f0344>] drm_crtc_helper_set_config+0x828/0x99c [<802ff270>] drm_mode_set_config_internal+0x5c/0xdc [<802eebe0>] drm_fb_helper_set_par+0x50/0xb4 [<802af580>] fbcon_init+0x490/0x500 [<802dd104>] visual_init+0xa8/0xf8 [<802df414>] do_bind_con_driver+0x140/0x37c [<802df764>] do_take_over_console+0x114/0x1c4 [<802af65c>] do_fbcon_takeover+0x6c/0xd4 [<802b2b30>] fbcon_event_notify+0x7c8/0x818 [<80049954>] notifier_call_chain+0x4c/0x8c [<80049cd8>] __blocking_notifier_call_chain+0x50/0x68 [<80049d10>] blocking_notifier_call_chain+0x20/0x28 [<802a75f0>] fb_notifier_call_chain+0x1c/0x24 [<802a9224>] register_framebuffer+0x188/0x268 [<802ee994>] drm_fb_helper_initial_config+0x2bc/0x4b8 [<802f118c>] drm_fbdev_cma_init+0x7c/0xec [<80817288>] imx_fb_helper_init+0x54/0x90 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c other info that might help us debug this: Chain exists of: &imx_drm_device->mutex --> &dev->mode_config.mutex --> &crtc->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&crtc->mutex); lock(&dev->mode_config.mutex); lock(&crtc->mutex); lock(&imx_drm_device->mutex); *** DEADLOCK *** 6 locks held by swapper/0/1: #0: (registration_lock){+.+.+.}, at: [<802a90bc>] register_framebuffer+0x20/0x268 #1: (&fb_info->lock){+.+.+.}, at: [<802a7a90>] lock_fb_info+0x20/0x44 #2: (console_lock){+.+.+.}, at: [<802a9218>] register_framebuffer+0x17c/0x268 #3: ((fb_notifier_list).rwsem){.+.+.+}, at: [<80049cbc>] __blocking_notifier_call_chain+0x34/0x68 #4: (&dev->mode_config.mutex){+.+.+.}, at: [<802fe758>] drm_modeset_lock_all+0x20/0x54 #5: (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54 In order to avoid this lockdep warning, remove the locking from imx_drm_encoder_get_mux_id() and imx_drm_crtc_panel_format_pins(). Tested on a mx6sabrelite and mx53qsb. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If EM Transmit bit is busy during init ata_msleep() is called. It is wrong - msleep() should be used instead of ata_msleep(), because if EM Transmit bit is busy for one port, it will be busy for all other ports too, so using ata_msleep() causes wasting tries for another ports. The most common scenario looks like that now (six ports try to transmit a LED meaasege): - port #0 tries for the 1st time and succeeds - ports #1-5 try for the 1st time and sleeps - port #1 tries for the 2nd time and succeeds - ports #2-5 try for the 2nd time and sleeps - port #2 tries for the 3rd time and succeeds - ports #3-5 try for the 3rd time and sleeps - port #3 tries for the 4th time and succeeds - ports #4-5 try for the 4th time and sleeps - port #4 tries for the 5th time and succeeds - port #5 tries for the 5th time and sleeps At this moment port #5 wasted all its five tries and failed to initialize. Because there are only 5 (EM_MAX_RETRY) tries available usually only five ports succeed to initialize. The sixth port and next ones usually will fail. If msleep() is used instead of ata_msleep() the first port succeeds to initialize in the first try and next ones usually succeed to initialize in the second try. tj: updated comment Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>

Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

…ux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two changes that prettify and compactify the SMP bootup output from: smpboot: Booting Node 0, Processors #1 #2 #3 OK smpboot: Booting Node 1, Processors #4 #5 #6 #7 OK smpboot: Booting Node 2, Processors #8 #9 #10 #11 OK smpboot: Booting Node 3, Processors #12 #13 #14 #15 OK Brought up 16 CPUs to something like: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 .... node #1, CPUs: #4 #5 #6 #7 .... node #2, CPUs: #8 #9 #10 #11 .... node #3, CPUs: #12 #13 #14 #15 x86: Booted up 4 nodes, 16 CPUs" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Further compress CPUs bootup message x86: Improve the printout of the SMP bootup CPU table

As part of normal operaions, the hrtimer subsystem frequently calls into the timekeeping code, creating a locking order of hrtimer locks -> timekeeping locks clock_was_set_delayed() was suppoed to allow us to avoid deadlocks between the timekeeping the hrtimer subsystem, so that we could notify the hrtimer subsytem the time had changed while holding the timekeeping locks. This was done by scheduling delayed work that would run later once we were out of the timekeeing code. But unfortunately the lock chains are complex enoguh that in scheduling delayed work, we end up eventually trying to grab an hrtimer lock. Sasha Levin noticed this in testing when the new seqlock lockdep enablement triggered the following (somewhat abrieviated) message: [ 251.100221] ====================================================== [ 251.100221] [ INFO: possible circular locking dependency detected ] [ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted [ 251.101967] ------------------------------------------------------- [ 251.101967] kworker/10:1/4506 is trying to acquire lock: [ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70 [ 251.101967] [ 251.101967] but task is already holding lock: [ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] which lock already depends on the new lock. [ 251.101967] [ 251.101967] [ 251.101967] the existing dependency chain (in reverse order) is: [ 251.101967] -> #5 (hrtimer_bases.lock#11){-.-...}: [snipped] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [snipped] -> #3 (&rq->lock){-.-.-.}: [snipped] -> #2 (&p->pi_lock){-.-.-.}: [snipped] -> #1 (&(&pool->lock)->rlock){-.-...}: [ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0 [ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580 [ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0 [ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80 [ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0 [ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120 [ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30 [ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160 [ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70 [ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5 [ 251.101967] -> #0 (timekeeper_seq){----..}: [snipped] [ 251.101967] other info that might help us debug this: [ 251.101967] [ 251.101967] Chain exists of: timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11 [ 251.101967] Possible unsafe locking scenario: [ 251.101967] [ 251.101967] CPU0 CPU1 [ 251.101967] ---- ---- [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(&rt_b->rt_runtime_lock); [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(timekeeper_seq); [ 251.101967] [ 251.101967] *** DEADLOCK *** [ 251.101967] [ 251.101967] 3 locks held by kworker/10:1/4506: [ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] stack backtrace: [ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 [ 251.101967] Workqueue: events clock_was_set_work So the best solution is to avoid calling clock_was_set_delayed() while holding the timekeeping lock, and instead using a flag variable to decide if we should call clock_was_set() once we've released the locks. This works for the case here, where the do_adjtimex() was the deadlock trigger point. Unfortuantely, in update_wall_time() we still hold the jiffies lock, which would deadlock with the ipi triggered by clock_was_set(), preventing us from calling it even after we drop the timekeeping lock. So instead call clock_was_set_delayed() at that point. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: stable <stable@vger.kernel.org> #3.10+ Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>

…to next/dt From Jason Cooper: mvebu DT changes for v3.14 (incremental #5) - mvebu - add rtc chip isl12057 node to ReadyNAS boards - fix register length in Armada XP pmsu - kirkwood - sort ocp nodes by address in 6282 dtsi file - add 6192 dtsi file - add LaPlug board - add sata phy node - dove - add sata phy node * tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu: ARM: Kirkwood: DT board setup for LaPlug ARM: Kirkwood: Add 6192 DTSI file ARM: mvebu: fix register length for Armada XP PMSU ARM: kirkwood: 6282: sort DT nodes by address Phy: Add DT nodes on kirkwood and Dove for the SATA PHY ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 8456a64 ("slab: use struct page for slab management") causes a crash in the LVM2 testsuite on PA-RISC (the crashing test is fsadm.sh). The testsuite doesn't crash on 3.12, crashes on 3.13-rc1 and later. Bad Address (null pointer deref?): Code=15 regs=000000413edd89a0 (Addr=000006202224647d) CPU: 3 PID: 24008 Comm: loop0 Not tainted 3.13.0-rc6 #5 task: 00000001bf3c0048 ti: 000000413edd8000 task.ti: 000000413edd8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111100100001110 Not tainted r00-03 000000ff0806f90e 00000000405c8de0 000000004013e6c0 000000413edd83f0 r04-07 00000000405a95e0 0000000000000200 00000001414735f0 00000001bf349e40 r08-11 0000000010fe3d10 0000000000000001 00000040829c7778 000000413efd9000 r12-15 0000000000000000 000000004060d800 0000000010fe3000 0000000010fe3000 r16-19 000000413edd82a0 00000041078ddbc0 0000000000000010 0000000000000001 r20-23 0008f3d0d83a8000 0000000000000000 00000040829c7778 0000000000000080 r24-27 00000001bf349e40 00000001bf349e40 202d66202224640d 00000000405a95e0 r28-31 202d662022246465 000000413edd88f0 000000413edd89a0 0000000000000001 sr00-03 000000000532c000 0000000000000000 0000000000000000 000000000532c000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401fe42c 00000000401fe430 IIR: 539c0030 ISR: 00000000202d6000 IOR: 000006202224647d CPU: 3 CR30: 000000413edd8000 CR31: 0000000000000000 ORIG_R28: 00000000405a95e0 IAOQ[0]: vma_interval_tree_iter_first+0x14/0x48 IAOQ[1]: vma_interval_tree_iter_first+0x18/0x48 RP(r2): flush_dcache_page+0x128/0x388 Backtrace: flush_dcache_page+0x128/0x388 lo_splice_actor+0x90/0x148 [loop] splice_from_pipe_feed+0xc0/0x1d0 __splice_from_pipe+0xac/0xc0 lo_direct_splice_actor+0x1c/0x70 [loop] splice_direct_to_actor+0xec/0x228 lo_receive+0xe4/0x298 [loop] loop_thread+0x478/0x640 [loop] kthread+0x134/0x168 end_fault_vector+0x20/0x28 xfs_setsize_buftarg+0x0/0x90 [xfs] Kernel panic - not syncing: Bad Address (null pointer deref?) Commit 8456a64 changes the page structure so that the slab subsystem reuses the page->mapping field. The crash happens in the following way: * XFS allocates some memory from slab and issues a bio to read data into it. * the bio is sent to the loopback device. * lo_receive creates an actor and calls splice_direct_to_actor. * lo_splice_actor copies data to the target page. * lo_splice_actor calls flush_dcache_page because the page may be mapped by userspace. In that case we need to flush the kernel cache. * flush_dcache_page asks for the list of userspace mappings, however that page->mapping field is reused by the slab subsystem for a different purpose. This causes the crash. Note that other architectures without coherent caches (sparc, arm, mips) also call page_mapping from flush_dcache_page, so they may crash in the same way. This patch fixes this bug by testing if the page is a slab page in page_mapping and returning NULL if it is. The patch also fixes VM_BUG_ON(PageSlab(page)) that could happen in earlier kernels in the same scenario on architectures without cache coherence when CONFIG_DEBUG_VM is enabled - so it should be backported to stable kernels. In the old kernels, the function page_mapping is placed in include/linux/mm.h, so you should modify the patch accordingly when backporting it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: John David Anglin <dave.anglin@bell.net>] Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Pekka Enberg <penberg@kernel.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

…NULL In the gen_pool_dma_alloc() the dma pointer can be NULL and while assigning gen_pool_virt_to_phys(pool, vaddr) to dma caused the following crash on da850 evm: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 805 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g0609e45-dirty #5 task: c4830000 ti: c4832000 task.ti: c4832000 PC is at gen_pool_dma_alloc+0x30/0x3c LR is at gen_pool_virt_to_phys+0x74/0x80 Process swapper, call trace: gen_pool_dma_alloc+0x30/0x3c davinci_pm_probe+0x40/0xa8 platform_drv_probe+0x1c/0x4c driver_probe_device+0x98/0x22c __driver_attach+0x8c/0x90 bus_for_each_dev+0x6c/0x8c bus_add_driver+0x124/0x1d4 driver_register+0x78/0xf8 platform_driver_probe+0x20/0xa4 davinci_init_late+0xc/0x14 init_machine_late+0x1c/0x28 do_one_initcall+0x34/0x15c kernel_init_freeable+0xe4/0x1ac kernel_init+0x8/0xec This patch fixes the above. [akpm@linux-foundation.org: update kerneldoc] Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Nicolin Chen <b42378@freescale.com> Cc: Joe Perches <joe@perches.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: <stable@vger.kernel.org> [3.13.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Interface #5 of 19d2:1270 is a net interface which has been submitted to the qmi_wwan driver so consequently remove it from the option driver. Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…to next/dt Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper: - mvebu - 38x - add 2GHz fixed clock, core divider clock, and nand controller - 385 - add nand controller and partitions to 385-DB board * tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>

If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56 [27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91 [27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26 [27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140 [27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20 [27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0 [27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0 [27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [<ffffffff810648af>] kthread+0xdf/0x100 [27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0 [27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

With EXT4FS_DEBUG ext4_count_free_clusters() will call ext4_read_block_bitmap() without s_group_info initialized, so we need to initialize multi-block allocator before. And dependencies that must be solved, to allow this: - multi-block allocator needs in group descriptors - need to install s_op before initializing multi-block allocator, because in ext4_mb_init_backend() new inode is created. - initialize number of group desc blocks (s_gdb_count) otherwise number of clusters returned by ext4_free_clusters_after_init() is not correct. (see ext4_bg_num_gdb_nometa()) Here is the stack backtrace: (gdb) bt #0 ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430 #1 ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000, desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358 #2 0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476 #3 0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0) at balloc.c:489 #4 0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665 #5 0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>, sb=0xffff880079a10000) at super.c:2143 #6 ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>, data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851 ... Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

virtscsi_init calls virtscsi_remove_vqs on err, even before initializing the vqs. The latter calls virtscsi_set_affinity, so let's check the pointer there before setting affinity on it. This fixes a panic when setting device's num_queues=2 on RHEL 6.5: qemu-system-x86_64 ... \ -device virtio-scsi-pci,id=scsi0,addr=0x13,...,num_queues=2 \ -drive file=/stor/vm/dummy.raw,id=drive-scsi-disk,... \ -device scsi-hd,drive=drive-scsi-disk,... [ 0.354734] scsi0 : Virtio SCSI HBA [ 0.379504] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 0.380141] IP: [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] PGD 0 [ 0.380141] Oops: 0000 [#1] SMP [ 0.380141] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #5 [ 0.380141] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 0.380141] task: ffff88003c9f0000 ti: ffff88003c9f8000 task.ti: ffff88003c9f8000 [ 0.380141] RIP: 0010:[<ffffffff814741ef>] [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP: 0000:ffff88003c9f9c08 EFLAGS: 00010256 [ 0.380141] RAX: 0000000000000000 RBX: ffff88003c3a9d40 RCX: 0000000000001070 [ 0.380141] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.380141] RBP: ffff88003c9f9c28 R08: 00000000000136c0 R09: ffff88003c801c00 [ 0.380141] R10: ffffffff81475229 R11: 0000000000000008 R12: 0000000000000000 [ 0.380141] R13: ffffffff81cc7ca8 R14: ffff88003cac3d40 R15: ffff88003cac37a0 [ 0.380141] FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 [ 0.380141] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.380141] CR2: 0000000000000020 CR3: 0000000001c0e000 CR4: 00000000000006f0 [ 0.380141] Stack: [ 0.380141] ffff88003c3a9d40 0000000000000000 ffff88003cac3d80 ffff88003cac3d40 [ 0.380141] ffff88003c9f9c48 ffffffff814742e8 ffff88003c26d000 ffff88003c26d000 [ 0.380141] ffff88003c9f9c68 ffffffff81474321 ffff88003c26d000 ffff88003c3a9d40 [ 0.380141] Call Trace: [ 0.380141] [<ffffffff814742e8>] virtscsi_set_affinity+0x28/0x40 [ 0.380141] [<ffffffff81474321>] virtscsi_remove_vqs+0x21/0x50 [ 0.380141] [<ffffffff81475231>] virtscsi_init+0x91/0x240 [ 0.380141] [<ffffffff81365290>] ? vp_get+0x50/0x70 [ 0.380141] [<ffffffff81475544>] virtscsi_probe+0xf4/0x280 [ 0.380141] [<ffffffff81363ea5>] virtio_dev_probe+0xe5/0x140 [ 0.380141] [<ffffffff8144c669>] driver_probe_device+0x89/0x230 [ 0.380141] [<ffffffff8144c8ab>] __driver_attach+0x9b/0xa0 [ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230 [ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230 [ 0.380141] [<ffffffff8144ac1c>] bus_for_each_dev+0x8c/0xb0 [ 0.380141] [<ffffffff8144c499>] driver_attach+0x19/0x20 [ 0.380141] [<ffffffff8144bf28>] bus_add_driver+0x198/0x220 [ 0.380141] [<ffffffff8144ce9f>] driver_register+0x5f/0xf0 [ 0.380141] [<ffffffff81d27c91>] ? spi_transport_init+0x79/0x79 [ 0.380141] [<ffffffff8136403b>] register_virtio_driver+0x1b/0x30 [ 0.380141] [<ffffffff81d27d19>] init+0x88/0xd6 [ 0.380141] [<ffffffff81d27c18>] ? scsi_init_procfs+0x5b/0x5b [ 0.380141] [<ffffffff81ce88a7>] do_one_initcall+0x7f/0x10a [ 0.380141] [<ffffffff81ce8aa7>] kernel_init_freeable+0x14a/0x1de [ 0.380141] [<ffffffff81ce8b3b>] ? kernel_init_freeable+0x1de/0x1de [ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80 [ 0.380141] [<ffffffff817dec29>] kernel_init+0x9/0xf0 [ 0.380141] [<ffffffff817e68fc>] ret_from_fork+0x7c/0xb0 [ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80 [ 0.380141] RIP [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP <ffff88003c9f9c08> [ 0.380141] CR2: 0000000000000020 [ 0.380141] ---[ end trace 8074b70c3d5e1d73 ]--- [ 0.475018] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.475018] [ 0.475068] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 0.475068] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [jejb: checkpatch fixes] Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>

When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step Quarx2k#4 and Quarx2k#5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>

V4L2 header extended for zorder support

a197b39

http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=dc98424eea8f9e96359515dbb8f6dbf354af1a04

Quarx2k closed this Nov 1, 2013

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

V4L2 header extended for zorder support #5

V4L2 header extended for zorder support #5

Docker-J commented Feb 11, 2013

V4L2 header extended for zorder support #5

V4L2 header extended for zorder support #5

Conversation

Docker-J commented Feb 11, 2013