Skip to content

Commit

Permalink
Updated bulk Classes, examples. (#23)
Browse files Browse the repository at this point in the history
  • Loading branch information
Kei committed Dec 27, 2019
1 parent 59c9304 commit b7c779a
Show file tree
Hide file tree
Showing 5 changed files with 482 additions and 15 deletions.
168 changes: 168 additions & 0 deletions examples/advanced/bulk_read_write/bulk_read_write.ino
View file
@@ -0,0 +1,168 @@
/*******************************************************************************
* Copyright 2016 ROBOTIS CO., LTD.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*******************************************************************************/

#include <Dynamixel2Arduino.h>

// Please modify it to suit your hardware.
#if defined(ARDUINO_AVR_UNO) || defined(ARDUINO_AVR_MEGA2560) // When using DynamixelShield
#include <SoftwareSerial.h>
SoftwareSerial soft_serial(7, 8); // DYNAMIXELShield UART RX/TX
#define DXL_SERIAL Serial
#define DEBUG_SERIAL soft_serial
const uint8_t DXL_DIR_PIN = 2; // DYNAMIXEL Shield DIR PIN
#elif defined(ARDUINO_SAM_DUE) // When using DynamixelShield
#define DXL_SERIAL Serial
#define DEBUG_SERIAL SerialUSB
const uint8_t DXL_DIR_PIN = 2; // DYNAMIXEL Shield DIR PIN
#elif defined(ARDUINO_SAM_ZERO) // When using DynamixelShield
#define DXL_SERIAL Serial1
#define DEBUG_SERIAL SerialUSB
const uint8_t DXL_DIR_PIN = 2; // DYNAMIXEL Shield DIR PIN
#elif defined(ARDUINO_OpenCM904) // When using official ROBOTIS board with DXL circuit.
#define DXL_SERIAL Serial3 //OpenCM9.04 EXP Board's DXL port Serial. (Serial1 for the DXL port on the OpenCM 9.04 board)
#define DEBUG_SERIAL Serial
const uint8_t DXL_DIR_PIN = 22; //OpenCM9.04 EXP Board's DIR PIN. (28 for the DXL port on the OpenCM 9.04 board)
#elif defined(ARDUINO_OpenCR) // When using official ROBOTIS board with DXL circuit.
// For OpenCR, there is a DXL Power Enable pin, so you must initialize and control it.
// Reference link : https://github.com/ROBOTIS-GIT/OpenCR/blob/master/arduino/opencr_arduino/opencr/libraries/DynamixelSDK/src/dynamixel_sdk/port_handler_arduino.cpp#L78
#define DXL_SERIAL Serial3
#define DEBUG_SERIAL Serial
const uint8_t DXL_DIR_PIN = 84; // OpenCR Board's DIR PIN.
#else // Other boards when using DynamixelShield
#define DXL_SERIAL Serial1
#define DEBUG_SERIAL Serial
const uint8_t DXL_DIR_PIN = 2; // DYNAMIXEL Shield DIR PIN
#endif


const uint8_t DXL_1_ID = 1;
const uint8_t DXL_2_ID = 2;
const uint8_t DXL_ID_CNT = 2;
const uint16_t user_pkt_buf_cap = 128;
uint8_t user_pkt_buf[user_pkt_buf_cap];

struct br_data_xel_1{
int16_t present_current;
int32_t present_velocity;
} __attribute__((packed));
struct br_data_xel_2{
int32_t present_position;
} __attribute__((packed));
struct bw_data_xel_1{
int32_t goal_velocity;
} __attribute__((packed));
struct bw_data_xel_2{
int32_t goal_position;
} __attribute__((packed));

struct br_data_xel_1 br_data_xel_1;
struct br_data_xel_2 br_data_xel_2;
struct bw_data_xel_1 bw_data_xel_1;
struct bw_data_xel_2 bw_data_xel_2;

Dynamixel2Arduino dxl(DXL_SERIAL, DXL_DIR_PIN);
DYNAMIXEL::BulkRead<DXL_ID_CNT> dxl_br(dxl);
DYNAMIXEL::BulkWrite<DXL_ID_CNT> dxl_bw(dxl);

void setup() {
// put your setup code here, to run once:
pinMode(LED_BUILTIN, OUTPUT);
DEBUG_SERIAL.begin(115200);
dxl.begin(57600);

dxl.torqueOff(DXL_1_ID);
dxl.torqueOff(DXL_2_ID);
dxl.setOperatingMode(DXL_1_ID, OP_VELOCITY);
dxl.setOperatingMode(DXL_2_ID, OP_POSITION);
dxl.torqueOn(DXL_1_ID);
dxl.torqueOn(DXL_2_ID);

// BulkRead using user external packet buffer.
dxl_br.setPacketBuffer(user_pkt_buf, user_pkt_buf_cap);
dxl_br.addParam(DXL_1_ID, 126, br_data_xel_1); // Start Addr: Present Current of X serise.
dxl_br.addParam(DXL_2_ID, 132, br_data_xel_2); // Start Addr: Present Position of X serise.

// BulkWrite using the internal packet buffer.
bw_data_xel_1.goal_velocity = 0;
bw_data_xel_2.goal_position = 0;
dxl_bw.addParam(DXL_1_ID, 104, bw_data_xel_1); // Start Addr: Goal Velocity of X serise.
dxl_bw.addParam(DXL_2_ID, 116, bw_data_xel_2); // Start Addr: Goal Position of X serise.
}

void loop() {
// put your main code here, to run repeatedly:
static uint32_t try_count = 0;
uint8_t recv_cnt;

DEBUG_SERIAL.print("\n>>>>>> Bulk Instruction Test : ");
DEBUG_SERIAL.println(try_count++);

// Update parameter data for BulkWrite
bw_data_xel_1.goal_velocity+=5;
if(bw_data_xel_1.goal_velocity >= 200){
bw_data_xel_1.goal_velocity = 0;
}
bw_data_xel_2.goal_position+=255;
if(bw_data_xel_2.goal_position >= 1023){
bw_data_xel_2.goal_position = 0;
}
dxl_bw.updateParamData();

// Send bulkWrite pakcet
if(dxl_bw.sendPacket() == true){
DEBUG_SERIAL.println("[BulkWrite] Success");

DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(DXL_1_ID);
DEBUG_SERIAL.print("\t Start Address: ");DEBUG_SERIAL.println(dxl_bw.getStartAddr(DXL_1_ID));
DEBUG_SERIAL.print("\t Address Length: ");DEBUG_SERIAL.println(dxl_bw.getAddrLength(DXL_1_ID));
DEBUG_SERIAL.print("\t Goal Velocity: ");DEBUG_SERIAL.println(bw_data_xel_1.goal_velocity);

DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(DXL_2_ID);
DEBUG_SERIAL.print("\t Start Address: ");DEBUG_SERIAL.println(dxl_bw.getStartAddr(DXL_2_ID));
DEBUG_SERIAL.print("\t Address Length: ");DEBUG_SERIAL.println(dxl_bw.getAddrLength(DXL_2_ID));
DEBUG_SERIAL.print("\t Goal Position: ");DEBUG_SERIAL.println(bw_data_xel_2.goal_position);
}else{
DEBUG_SERIAL.print("[BulkWrite] Fail, Lib error code: ");
DEBUG_SERIAL.print(dxl.getLastLibErrCode());
}
DEBUG_SERIAL.println();

delay(250);

// Send bulkRead packet & Receive data
recv_cnt = dxl_br.sendPacket();
if(recv_cnt > 0){
DEBUG_SERIAL.print("[BulkRead] Success, Received ID Count: ");
DEBUG_SERIAL.println(recv_cnt);

DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(DXL_1_ID);
DEBUG_SERIAL.print(", Error: ");DEBUG_SERIAL.println(dxl_br.getError(DXL_1_ID));
DEBUG_SERIAL.print("\t Present Current: ");DEBUG_SERIAL.println(br_data_xel_1.present_current);
DEBUG_SERIAL.print("\t Present Velocity: ");DEBUG_SERIAL.println(br_data_xel_1.present_velocity);

DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(DXL_2_ID);
DEBUG_SERIAL.print(", Error: ");DEBUG_SERIAL.println(dxl_br.getError(DXL_2_ID));
DEBUG_SERIAL.print("\t Present Position: ");DEBUG_SERIAL.println(br_data_xel_2.present_position);
}else{
DEBUG_SERIAL.print("[BulkRead] Fail, Lib error code: ");
DEBUG_SERIAL.println(dxl.getLastLibErrCode());
}
DEBUG_SERIAL.println("=======================================================");

digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
delay(750);
}

4 changes: 2 additions & 2 deletions examples/advanced/bulk_read_write_raw/bulk_read_write_raw.ino
View file
Expand Up @@ -194,10 +194,10 @@ void loop() {
DEBUG_SERIAL.println(try_count++);
if(dxl.bulkWrite(&bw_infos) == true){
DEBUG_SERIAL.println("[BulkWrite] Success");
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(bw_infos.p_xels[0].id);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(bw_infos.p_xels[0].id);
DEBUG_SERIAL.print("\t Goal Velocity: ");DEBUG_SERIAL.println(bw_data_xel_1.goal_velocity);

DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(bw_infos.p_xels[1].id);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(bw_infos.p_xels[1].id);
DEBUG_SERIAL.print("\t Goal Position: ");DEBUG_SERIAL.println(bw_data_xel_2.goal_position);
}else{
DEBUG_SERIAL.print("[BulkWrite] Fail, Lib error code: ");
Expand Down
17 changes: 9 additions & 8 deletions examples/advanced/sync_read_write/sync_read_write.ino
View file
Expand Up @@ -89,13 +89,13 @@ void setup() {
dxl.torqueOn(DXL_ID_LIST[i]);
}

// SyncRead using user external buffer.
// SyncRead using user external packet buffer.
dxl_sr.setPacketBuffer(user_pkt_buf, user_pkt_buf_cap);
for(i=0; i<DXL_ID_CNT; i++){
dxl_sr.addParam(DXL_ID_LIST[i], sr_data[i]);
}

// SyncWrite using the internal buffer.
// SyncWrite using the internal packet buffer.
sw_data[0].goal_velocity = 0;
sw_data[1].goal_velocity = 100;
for(i=0; i<DXL_ID_CNT; i++){
Expand All @@ -108,6 +108,9 @@ void loop() {
static uint32_t try_count = 0;
uint8_t i, id, recv_cnt;

DEBUG_SERIAL.print("\n>>>>>> Sync Instruction Test : ");
DEBUG_SERIAL.println(try_count++);

// Update parameter data for SyncWrite
for(i=0; i<DXL_ID_CNT; i++){
sw_data[i].goal_velocity+=5;
Expand All @@ -117,14 +120,12 @@ void loop() {
}
dxl_sw.updateParamData();

DEBUG_SERIAL.print("\n>>>>>> Sync Instruction Test : ");
DEBUG_SERIAL.println(try_count++);
// Send syncWrite
// Send syncWrite pakcet
if(dxl_sw.sendPacket() == true){
DEBUG_SERIAL.println("[SyncWrite] Success");
for(i=0; i<DXL_ID_CNT; i++){
id = dxl_sw.getIDByIndex(i);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(id);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(id);
DEBUG_SERIAL.print("\t Goal Velocity: ");DEBUG_SERIAL.println(dxl_sw.getDataPtr(id)->goal_velocity);
}
}else{
Expand All @@ -135,14 +136,14 @@ void loop() {

delay(250);

// Send syncRead & Receive data
// Send syncRead packet & Receive data
recv_cnt = dxl_sr.sendPacket();
if(recv_cnt > 0){
DEBUG_SERIAL.print("[SyncRead] Success, Received ID Count: ");
DEBUG_SERIAL.println(recv_cnt);
for(i=0; i<recv_cnt; i++){
id = dxl_sr.getIDByIndex(i);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(dxl_sr.getIDByIndex(i));
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(id);
DEBUG_SERIAL.print(", Error: ");DEBUG_SERIAL.println(dxl_sr.getError(id));
DEBUG_SERIAL.print("\t Present Current: ");DEBUG_SERIAL.println(dxl_sr.getDataPtr(id)->present_current);
DEBUG_SERIAL.print("\t Present Velocity: ");DEBUG_SERIAL.println(dxl_sr.getDataPtr(id)->present_velocity);
Expand Down
2 changes: 1 addition & 1 deletion examples/advanced/sync_read_write_raw/sync_read_write_raw.ino
View file
Expand Up @@ -180,7 +180,7 @@ void loop() {
if(dxl.syncWrite(&sw_infos) == true){
DEBUG_SERIAL.println("[SyncWrite] Success");
for(i=0; i<sw_infos.xel_count; i++){
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.print(sw_infos.p_xels[i].id);
DEBUG_SERIAL.print(" ID: ");DEBUG_SERIAL.println(sw_infos.p_xels[i].id);
DEBUG_SERIAL.print("\t Goal Velocity: ");DEBUG_SERIAL.println(sw_data[i].goal_velocity);
}
}else{
Expand Down

0 comments on commit b7c779a

Please sign in to comment.