this script will be good for on and off the printer over wireless plugs (wifi or 466mhz) an u can also use the raspberry Gpio's an it will also have a Autoshutdown funktion for it.
when you can use a shell command to set the state of your Plug
this sample will use raspberry-remote with a 466mhz modul
it will use the power control panel at mainsail, the power funktion from moonraker and the shell addon for klipper
in the panel you can put on an off the autoshutdown until shortly before the timer (your time in the config) is over.
Version 0.0.2 beta 1.11.2020
features:
- add config to klipper_config (now you can cahnge settigs over mainsail directly)
- Add test.gcode for a fast test (lock at the faq for use)
For more information or instructions, please check out the appropriate repositories listed below:
Klipper by KevinOConnor :
https://github.com/KevinOConnor/klipper
Moonraker by Arksine :
https://github.com/Arksine/moonraker
Mainsail Webinterface by meteyou :
https://github.com/meteyou/mainsail
Fluidd Webinterface by cadriel :
https://github.com/cadriel/fluidd
kiauh by th33xitus :
https://github.com/th33xitus/kiauh/