BlueSCSI DaynaPORT "Mod" SANA-II Driver for Amiga
For further help please join my discord server
For a step-by-step guide on installing, check out this video by Retronaut
If you find your data transfer is very slow, like less than 5k/s then check you've turned the debug log off within BlueSCSI!
This is a SANA-II network for the Amiga for use with BlueSCSI V2 with a Pi Pico W board.
The BlueSCSI requires a special version of it's firmware to patch around issues with the
Amiga SCSI and GVPSCSI device drivers.
BlueSCSI Firmware Update - INCLUDED IN THIS ZIP
Power off the Amiga, and, hold down the white button on the blue scsi Pi Pico.
Whilst hoding down the button, connect the Pico to your desktop computer
A new drive should appear. Copy the 'firmware.uf2' to the drive, it will then disappear.
Disconnect the cable.
BlueSCSI Configuration
Create a blank file on the BlueSCSI SD card called NE4.hda. If you are already using device
number 4, then change this to a number you aren't using.
Installation
Copy the scsidayna.device to devs:networks and then setup this device for your network
stack. For example, follow the instructions in
https://github.com/cnvogelg/plipbox/blob/master/doc/src/amiga.md
Configuration
For this driver to work it needs to be configured.
Included in this archive is a file called 'scsidayna.prefs'
This file needs editing and then copying to ENVARC:
scsidayna.prefs
device= change to the SCSI driver for your card
deviceid= The SCSI device ID the DaynaPORT device is on, or -1 for auto-detect
priority= The task priority. 0 is recommended, 1 will give hgiher speed but slower machine
mode= **VERY** important:
0: Original DaynaPORT Interface
1: Use with scsi.devie (A590/A2091)
2: Use with gvpscsi.device
autoconnect=0 If set to 1, the driver will attempt to connect to WIFI on startup
ssid= The WIFI network name to connect to
key= The WIFI password