Skip to content

My proposal solution for the homework for the PoliMi course `Image analysis and computer vision 2020/2021`

Notifications You must be signed in to change notification settings

RobertoBochet/iacv-homework

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

43 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

IACV homework

Image processing (processing.m)

F1 - Feature extraction

First thing I cropped the image to reduce sky area which is useless in the feature detection process.

Sky mask

Before adjust the image contrast, I tried to remove as much sky as possible, which could reduce the quality of the contrast improvement. I changed the space color of the image to the HSV then I selected only a small subset of the value V; in order to improve the quality of the mask I applied an iteration of imdilate to remove the small blob. So I got a sky mask.

sky masked

Edges detection

Before to apply the canny function we need to define one channel image; I tried some method to convert 3 channels image to one channel image, some of them using a single channel of a specific space color as HSV, but in finally I decided to use the classical conversion to the gray scale image due to the inadequate results of other methods. Then I tried to enhance the image contrast apply on it an adaptive histogram equalization exploiting method adapthisteq, because of the high exposition of the sky I have to limit the area of the histogram equalization to the castle only (excluding the sky), to do this I used the sky mask previously computed with the exploiting roifilt2 function.

histogram equalized image

As last step before apply the edge detection algorithm I decided to rescale the image to reduce its size; this behaviour showed to improve the quality of the edge detection and the following lines' detection. Then I did the edge detection exploiting the canny algorithm: this algorithm, different to the other differentiation methods, returns a binary image composed by lines, this result simplify the application of the lines' detection exploiting the Hough transformation. I tuned the canny algorithm parameters with the hysteresis thresholds of $\begin{bmatrix} 0.1 & 0.2 \end{bmatrix}$ and a sigma of the Gausian filter of $3$.

edges

Lines detection

In order to detect the lines in the image I used the Hough transformation, this transformation, for each point in the image (in this case the edges image), defines a family of intersecting straight lines that in parametric plane (given by the pairs $(\rho, \theta)$ of the parametric line $\rho = x \cos(\theta) + y \sin(\theta)$) is a curve. The plane is used as an accumulator, fitted with all the parameters pairs got from the points of the edges image, then the lines in the image are identified as the peaks of the parametric plane.

Due to the preprocessing I could maintain parameters like the default ones for the hough function, I set the resolution of theta as $1^\circ$ and the rho resolution to $1$. I set a limits of 300 peaks from the parametric plane and a neighbours' suppression to $\begin{bmatrix} 15 & 15 \end{bmatrix}$ to reduce similar results. Finally, I retrieved the segments lines with the houghlines function setting a max gap between two points on the same line of $8$ pixels and the minimum length of a segment line of $25$ pixels.

detected lines

Features detection

For this step I decided to apply only the histogram equalization on the image after the conversion to the gray scale. To detect the images features I tried several algorithms, then I chose the SURF one which produces the best result (several algorithms detect features only on the battlement).

features detected

Geometry (geometry.m)

Functions and class

To simplify the developing of the required result I chose to write some classes and functions.

Class

  • HX

    Represents a homogeneous vector. The multiplication between two HW instances is interpreted as a cross product, moreover provides some function to draw as line or point.

  • Seg

    Represents a line segment. It provides method line to retrieve the associated line.

  • SegGroup

    Represents a group of line segments.

    • find_vanish_point (method)

      finds the intersection point of the lines as an optimization problem. It imposes the problem as a solution of an equation system composed by eqautions in the form $l^T p = 0$ and it solves this exploiting the svd method.

Functions

  • get_normalized_transformation

    Given a set of homogeneous points returns a similar transformation to normalize them.

  • draw_axis

    Given a projective matrix $M$, it draws the reference frame in the image.

G1 - 2D reconstruction

Due to the experimental results I decided to include some hand-taken (and finding in different way) lines to improve the accuracy of the calculations.

Recovery of the affine properties

To recover the affine properties of the images we have to put back the line at infinity in the image to its canonical position $\begin{bmatrix}0&0&1\end{bmatrix}^T$. In order to do it we need to compute the infinity line for the plane $\Pi$ in the image, on this line lie all the vanishes points given by the parallel lines of the plane $\Pi$. So, I choice to compute the vanishes points for the facade on which there are the line segments 2, 3 and 5 (the vanishes points of the facades 1, 4 and 6 would introduce too much uncertainty, because of the lines lie on them are almost parallel).

So I selected some lines parallel to plane $\Pi$ on the facades 2, 3 and 5; for each plane I created an instance of SegGroup to group the parallel line segments. With the method find_vanish_point I retrieve the vanishes points corresponding to the three lines groups.

parallel lines

The find_vanish_point sets the problem to find a vanish point as a minimization one. We know that a point $p$ on a line $l$ solves the relation $l^Tp=0$, thus the lines are collected in a matrix $L=\begin{bmatrix}l_1 & l_2 & \dots\end{bmatrix}^T$ where the best approximation for the vanish point is the point $v$ that minimize the relation $\lVert Lv \rVert$. The point $v$ that minimize the error is found exploiting the least squares solution of homogeneous equation as the last column of the matrix $V$ getting from the singular value decomposition of the matrix $L$.

In order to reduce the error given by the svd function, the line coordinates are normalized rescaling them around zero.

vanish points

Found the 3 vanish points I use them to find the infinity line in the image, which have to pass to all the three vanish points. Due to the noise the infinity line cannot satisfy the relation $v l_\infty = 0$ for all the three vanish points, so I set also the problem to find infinity line as a minimization one. In this case I grouped the vanishes points in a matrix $V = \begin{bmatrix}v_2 & v_3 & v_5\end{bmatrix}^T$ looking for the line $l_\infty$ which minimize $\lVert V l_\infty \rVert$. Also to solve this minimization problem I used the svd function after the data were been normalized to reduce errors.

infinity line

The projective transformation to restore the affinity property can be written as

$$ H_P = \begin{bmatrix} 1 & 0 & 0 \\ 0 & 1 & 0 \\ & l_\infty^T & \\ \end{bmatrix} $$

So, the transformation to restore affinity properties is

$$ H_P = \begin{bmatrix} 1 & 0 & 0 \\ 0 & 1 & 0 \\ -2.7284 \cdot 10^{-6} & -2.8876 \cdot 10^{-4} & 1 \\ \end{bmatrix} $$

Apply the transformation to the image we can restore the affine properties.

affine properties rectified

Recovery of the metric properties

In order to recover the metric properties, we can exploit the line infinity conic $C_\infty^\ast$ in the image, putting back it to its canonical position, that is given by

$$ \bar C_\infty^\ast = IJ^T + JI^T = \begin{bmatrix} 1 & 0 & 0 \\ 0 & 1 & 0 \\ 0 & 0 & 0 \\ \end{bmatrix} $$

where $I = \begin{bmatrix} 1 & i & 0 \end{bmatrix}^T$ and $J = \begin{bmatrix} 1 & -i & 0 \end{bmatrix}^T$ are the circular points.

The form of $\bar C_\infty^\ast$ in an image where the metric properties are loss but not the affinity ones is given by

$$ C_\infty^\ast =\begin{bmatrix} KK^T & 0 \\ 0^T & 0 \\ \end{bmatrix} \qquad KK^T = \begin{bmatrix} s_1 & s_2 \\ s_2 & s_3 \\ \end{bmatrix} = S $$

We can exploit the relation $l^T C_\infty^\ast m = 0$ where $l$ and $m$ are two images of orthogonal lines to compute $C_\infty^\ast$ in the image. So the constraint can be written as $a^T s = 0$ where $a=\begin{bmatrix}l_1 m_1 & l_1 m_2 + l_2 m_1 & l_2 m_2\end{bmatrix}^T$ and $s=\begin{bmatrix}s_1 & s_2 & s_3\end{bmatrix}^T$. $s$ can be found solving the system $A^T s = 0$ where $A$ is a matrix which columns are composed by the relation $a(l,m)$ for at least 2 couples of orthogonal lines, but because we have 3 couples of orthogonal lines in the plane $\Pi$ (1-2, 4-5, 5-6) it is useful set the problem to find $s$ as an optimization one. The problem to minimize $\lVert A^Ts \rVert$ can be solved exploiting the svd method.

Gotten $S$ and thus $C_\infty^\ast$ we can find the affine transformation that put back this conic to its canonical position under the relation $\bar C_\infty^\ast = H_A C_\infty^\ast H_A^T$. $H_A$ can be gotten exploiting SVD of $C_\infty^\ast$ (because of $C_\infty^\ast$ have last column and last row equal to zero is better to decompose $S$) as

$$ H_A^{-1} = \begin{bmatrix} U \sqrt{D} V^T & 0 \\ 0 & 1 \\ \end{bmatrix} $$

Affine transformation may include a mirror effect, so I decide to remove this effect to re-orientate the image in the original orientation if this effect appears.

So, the affine transformation to restore metric properties is

$$ H_A = \begin{bmatrix} 1.2422 & -0.34835 & 0 \\ -0.34835 & 1.5085 & 0 \\ 0 & 0 & 1 \\ \end{bmatrix} $$

metric properties rectified

Fix a reference frame on $\Pi$

To better evaluate the points on plane $\Pi$ I decided to compute a further similar transformation to assign an arbitrary reference frame on $\Pi$. I chose to put the reference frame at the intersection of the lines 1 and 2, with y-axis aligned with the line 2 and with z-axis headed to the sky; first I applied a translation to define the new origin, then I calculated the rotation matrix to align the line $2$ to the y-axis, and as last step I rescaled the points to meter unit exploiting an approximate measure of the segment $5$ gotten from internet.

The similar homography included rotation, translation and scale is

$$ H_S = \begin{bmatrix} 4.6764 \cdot 10^{-3} & -2.4485 \cdot 10^{-3} & -4.2493 \\ 2.4485 \cdot 10^{-3} & 4.6764 \cdot 10^{-3} & -13.848 \\ 0 & 0 & 1 \\ \end{bmatrix} $$

$\Pi$ on reference frame

The overall homography to map the image points of the plane $\Pi$ to the new reference system is

$$ H = \begin{bmatrix} 6.6736 \cdot 10^{-3} & -4.0956 \cdot 10^{-3} & -4.2493 \\ 1.4503 \cdot 10^{-3} & 1.02 \cdot 10^{-2} & -13.848 \\ -2.7284 \cdot 10^{-6} & -2.8876 \cdot 10^{-4} & 1 \\ \end{bmatrix} $$

G2 - Calibration

Vertical vanish point

I selected the vertical lines shown in the figure to find the vertical vanish point. As previously I put the vertical line segments in an instance of SegGroup and I used the method find_vanish_point to find the intersection point of the segments' associated lines. As previously saw, the function find_vanish_point solve the problem to find intersection point as an optimization one, exploiting svd after the data normalization.

vertical vanish point

Calibration

Now, we have 4 vanishes points and a metric rectification homography that we can use to compute the intrinsic parameters of the camera. In particular, I used the technique of the conical fitting. This technique is based on set an optimization problem to find the conic $\omega = (KK^T)^{-1}$. The conic can be written as

$$ \omega = \begin{bmatrix} w_1 & w_2 & w_4 \\ w_2 & w_3 & w_5 \\ w_4 & w_5 & w_6 \\ \end{bmatrix} $$

it is invariant to scale then it has 5 dof.

As first constraint I set that $w_2=0$ due to the assumption of skew factor is equal to zero; this constraint in the algorithm was considered as a hard constraint.

Then, I set the first soft constraint exploiting the homography computed at the point G1: given a metric rectified homography ($H^{-1}$) we can find the projection of the two canonical circular points $\begin{bmatrix} 1 & \pm i & 0 \end{bmatrix}^T$ in the image, which intersect $\omega$ conic. With the inverse homography we can map the circular points in the image as $H \begin{bmatrix} 1 & \pm i & 0 \end{bmatrix}^T$ getting $h_1 \pm i h_2$ where $h_1$ and $h_2$ are the columns of $H$. The conic have to satisfy the constraints $(h_1 \pm i h_2)^T \omega (h_1 \pm i h_2) = 0$ which can be rewritten as $h_1^T \omega h_2 = 0$ and $h_1^T \omega h_1 - h_2^T \omega h_2 = 0$ that guarantee 2 constraints.

The others two required constraints are given by ones based on orthogonality: given two vanish points $v, u$ corresponding to orthogonal lines these satisfy the equation $v^T \omega u = 0$. I tried this way used the couple of vanish points given by the plane 2, 3, 5 and vertical ones, but due to numerical error these introduce too uncertainty, so I decide to use the alternative constraint based on a vanish line $l$ and a vanish point $v$ corresponding to orthogonal plane and line $[l]_x \omega v = 0$, where $[l]_x$ is the $\mathbb{P}^2$ version of the Plücker matrix of $l$ such that

$$ [l]_x = \begin{bmatrix} 0 & -l_3 & l_2 \\ l_3 & 0 & -l_1 \\ -l_2 & l_1 & 0 \end{bmatrix} $$

This equation gives two other constraints. For these, I chose the vertical vanish point $v_v$ and the infinity line $l_\infty$ found at the point G1.

The 2 kind of soft constraints cannot be used directly with the svd method, indeed we need to write these constraints in the form $A w = 0$. So we can stacked the elements of the matrix $\omega$ in a vector $w = \begin{bmatrix} w_1 & w_2 & w_3 & w_4 & w_5 & w_6 \end{bmatrix}$.

The first kind of constraint $v^T \omega u = 0$ provides one row of $A$ in the form

$$ a_r(v,u) = \begin{bmatrix} v_1 u_1 & v_1 u_2 + v_2 u_1 & v_2 u_2 & v_1 u_3 + v_3 u_1 & v_2 u_3 + v_3 u_2 & v_3 u_3 \end{bmatrix} $$

Instead, the second kind $[l]_x \omega v = 0$ provides three linear dependent row of $A$ in the form

$$ A_r(l,v) = \begin{bmatrix} 0 & -l_3 v_1 & -l_3 v_2 & l_2 v_1 & l_2 v_2 - l_3 v_3 & l_2 v_3 \\ l_3 v_1 & l_3 v_2 & 0 & l_3 v_3 - l_1 v_1 & -l_1 v_2 & l_1 v_3 \\ - l_2 v_1 & l_1 v_1 - l_2 v_2 & l_1 v_2 & -l_2 v_3 & l_1 v_3 & 0 \\ \end{bmatrix} $$

So, our constraints matrix $A$ can be composed as

$$ A = \begin{bmatrix} a_r(h_1, h_2) \\ a_r(h_1, h_1) - a_r(h_2, h_2) \\ A_r(l_\infty, v_v) \end{bmatrix} $$

Due to linear dependency of the row of $A_r$ one of them could be dropped, this would not afflict the result

Due to the hard constraint $w_2 = 0$ I chose to drop the corresponding row in $w$ and the corresponding column in the matrix $A$.

Before compose the matrix for the svd the data were been normalized exploiting the function get_normalized_transformation which returns a transformation $T$.

So I applied the svd function to $A$, and I got the $w$ vector as the last row of the matrix V given by the decomposition. Then, I recomposed the matrix $\omega$ and I could get the normalized calibration matrix $\bar K$ exploiting the Cholesky factorization due to the relation $\omega = (\bar K \bar K^T)^{-1}$.

The optimization method might return a negative definite $\omega$ matrix, while Cholesky factorization works only on positive definite matrix, but $\omega$ is invariant to rescale factor so if this happens it is enough to change the sign of $\omega$

As last step (because of the data normalization) I removed the precondition effect from $\bar K$ with $K = T^{-1} \bar K$.

$$ K = \begin{bmatrix} 3138.7 & 0 & 2000.3 \\ 0 & 2883.4 & 1811.5 \\ 0 & 0 & 1 \\ \end{bmatrix} $$

G3 - Localization

We need to compute a projective matrix which allow us to express the 3D points in an arbitrary reference frame different from the camera one.

This "world" reference frame to which we can refer the 3D point is the same put on the plane $\Pi$ at the point G1.

So we need to compute the transformation between the camera reference frame and the world reference frame in the form $\begin{bmatrix}R & t\end{bmatrix}$ also called extrinsic parameters of the camera. To do this I used the knowledge of the metric rectification; indeed the homography computed in the point G1 gives us the information to move 2D point of plane $\Pi$ to 3D points; if we want retrieve the transformation between camera frame and the frame chosen for the homography $H^{-1}$ we can use the relation

$$ \begin{bmatrix} r_x & r_y & t \end{bmatrix} = \lambda (K^{-1}H) $$

where $r_x$ and $r_y$ are the unit vectors of the world frame chosen as reference in the homography and $t$ is its origin position, all of them seen from camera reference frame. $\lambda$ is unknown scale factor, in order to remove it we can use the known information that $\lVert r_x \rVert = \lVert r_y \rVert = 1$ because $r_x$ and $r_y$ are the column of a rotation matrix. The $r_z$ can be calculated as the unit vector which complete the rotation matrix given by $r_x$ and $r_y$ so $r_z = r_x \times r_y$

The projective matrix $M$ can be written as

$$ M_w = K \begin{bmatrix} r_x & r_y & r_z & t \end{bmatrix} $$

The resulting projective matrix is

$$ M_w = \begin{bmatrix} 2729.3 & 2342.5 & 957.52 & 44035 \\ -621.63 & 2931.9 & -1616.4 & 37958 \\ -0.17205 & 0.85301 & 0.49272 & 32.572 \\ \end{bmatrix} $$

I chose to use the homography in the meters unit, so I can express the 3D points directly in meters.

So, computed the projective matrix for the world reference frame I could easily draw it in the image.

world reference frame

I could be also determinate the position of the camera $c^w$ in the world frame as solution of the equation $M_w c^w = 0$ where $c^w$; it can be computed as the null space of $M$

$$ c^w = \begin{bmatrix} 11.409 \\ -22.91 \\ -22.46 \\ \end{bmatrix} $$

G4 - Reconstruction

We need to rectify a castle's facade exploiting the knowledge of matrix $K$. So, I chose to rectify the facade identified by the line segment 1 of the plane $\Pi$. First thing I put a comfortable reference frame on the facade 1 computing the transformation from the world frame to the new frame $T_f^w$

$$ T_f^w = \begin{bmatrix} 1 & 0 & 0 & -9 \\ 0 & 0 & 1 & 0 \\ 0 & -1 & 0 & 0 \\ 0 & 0 & 0 & 1 \\ \end{bmatrix} $$

Then I computed the camera matrix expressed in the new reference frame as $M_f = M_w T_f^w$, so I was able to express all the points on the facade 1 in a simple way.

$$ M_f = \begin{bmatrix} 2729.3 & -957.52 & 2342.5 & 19471 \\ -621.63 & 1616.4 & 2931.9 & 43553 \\ -0.17205 & -0.49272 & 0.85301 & 34.121 \\ \end{bmatrix} $$

reference frame on facade 1

I defined 4 rectangle corners in the 3D world expressed in the new reference frame $[0, 0, 0]', [9, 0, 0]', [9, 14, 0]', [0, 14, 0]'$, and exploiting $M_f$ I found them projections in the image.

rectangle on facade 1

Having 4 points in a plane in 3D space and their projections in the image I could define a homography that rectify the facade 1.

rectified facade 1

About

My proposal solution for the homework for the PoliMi course `Image analysis and computer vision 2020/2021`

Topics

Resources

Stars

Watchers

Forks

Languages