Hello everyone:

First of all, THANK YOU to Miyoo for giving us some units for development, also to Ninoh_FOX for the standalone emulators and the LED script and to Steward Fu for the Drastic emulator and the SORR 5.2 port.

This image does NOT have games or bios. The "bios" files must be placed in the path "/RetroArch/.retroarch/system" and if you use PCSX and Picodrive standalone emulators, you will also have to put it in their corresponding folders.

Please note that the scrapes should be placed in a folder named "Imgs" inside each system folder within the "ROMS" directory (Roms/Imgs). The scrape should have the same name as the ROM and be in "png" format. It is recommended that scrapes have a maximum resolution of 320x240 to avoid performance issues.

INCLUDED SYSTEMS

AMIGA, AMSTRAD CPC, ARCADE, ATARI2600, ATARI5200, ATARI7800, COMMODORE64, CPS1, CPS2, CPS3, DREAMCAST, DOOM, MS-DOS, FBNEO, NES, FAMILY DISK SYSTEM, GAME BOY, GAME BOY COLOR, GAME BOY ADVANCE, GAME GEAR, GAME & WATCH, LYNX, MEGADRIVE, MASTER SYSTEM, MSU-1, MSUMD, MSX, NINTENDO64, NINTENDO DS, NEOGEO, NEOGEOCD, NEO GEO POCKET, ODYSSEY2, PCENGINE, PCENGINECD, PICO-8, POKEMON MINI, PSP, PSX, QUAKE, SCUMMVM, SEGA 32X, SEGA CD, SG-1000, SUPER NINTENDO, SUPER GAME BOY, SUPERVISION, TIC-80, VIRTUAL BOY, WOLF3D, WONDERSWAN, X68000 and ZX SPECTRUM.

CONTROLS IN THE MIYOO OPERATING SYSTEM

In the main menu:

• DPAD: Navigate through menus.
• HOME: Shows a menu to search ROMs by name and refresh ROM lists.
• A/Y: OK.
• B: Back.
• SELECT: Search ROMs by name.
• L2 and R2: Fast scrolling.
• START + L1/R1: Adjust brightness.
• SELECT + L1/R1: Adjust volume.

In a system's game list:

• DPAD: Navigate through the list.
• HOME: Show menu to open the game, add it to favorites, or delete it.
• X: Change core to use with the game (does not save the selection).
• A/Y: OK.
• B: Back.
• SELECT: Search ROMs by name.
• L2 and R2: Fast scrolling.
• START + L1/R1: Adjust brightness.
• SELECT + L1/R1: Adjust volume.

CONTROLS IN RETROARCH (HOTKEYS)

• HOME + A: Pause.
• HOME + B: Fast Forward (not recommended for PS1, may cause performance issues).
• HOME + Y: Show/hide FPS.
• HOME + X: Miyoo menu (from here you can save and load states).
• HOME + L1: Load Savestate.
• HOME + R1: Save Savestate.
• HOME + L2: Previous Savestate slot.
• HOME + R2: Next Savestate slot.
• HOME + START: Exit the game (same as exiting from the Miyoo menu).
• START + L1/R1: Adjust brightness.
• SELECT + L1/R1: Adjust volume.

EXTRA SHORTCUTS FOR CERTAIN SYSTEMS

• GAME BOY: Use R2 and L2 to switch color palettes and R1 to speed up the game.
• GAME BOY COLOR: Use R1 to speed up the game.
• GAME BOY ADVANCE: Use R2 to speed up the game.
• ARCADE: Use R2 to open the configuration menu, where you can change switches or activate cheats.
• NEO GEO AND NEOGEO CD: A+B+C: Press this on the Universal Bios screen to change region, BIOS configuration, and other options. Select + Start or Start + A + B + C: Access the in-game menu to activate cheats. Hold Start for a few seconds: Access the game's switch menu (Neo Geo only). To load a save state when starting a game, do so after the Unibios loading screen to avoid corruption. If corruption occurs, you can reload the state after exiting and re-entering the game.
• CAPCOM (CPS1, CPS2, AND CPS3): BOM's switch files have been used. Although FBA cannot change them, it can read them, so games like Alien vs Predator and the first D&D are in Spanish, while games like SFA 3 have proper difficulty and one-credit settings.

IMPORTANT INFORMATION

• For systems like DC, PSP, N64 and NDS it is not recommended to play for long periods as the console heats up, and these systems are not really meant to be played on this console.
• Remember that you can switch cores when loading a game. If a game doesn't perform well with one core, try another. The Miyoo system does not allow saving core assignments (something we cannot remedy). By default, Arcade loads games with the "mame2003_plus_libretro" core, but some games may need others. For demanding games, use the "km_mame2003_xtreme_libretro" core, and for others, "fbneo_libretro" may be necessary. This requires experimentation.
• After exiting sleep mode, both background music and screen brightness do not return to default values (this is not an image fault but a console issue).
• If the analog control has "drift," it is recommended to calibrate it in the system settings until it works correctly.

This is a BETA version. As firmware updates will be released from Miyoo, we will do everything possible to refine the image as much as possible. Anything you detect, please tell us.

To download click on this link: https://github.com/Rparadise-Team/BTN/releases

Rparadise Team.