201911 #167
Closed
201911 #167
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
master. Needed as Compilation was failing.
…c-net#3227) * Create a SONiC configuration management service * Perform config db migration after loading config_db.json to redis DB * Migrate config-setup post migration hooks on image upgrade config-setup post migration hooks help user to migrate configurations from old image to new image. If the installed hooks are user defined they will not be part of the newly installed image. So these hooks have to be migrated to new image and only then they can be executing when the new image is booting. The changes in this fix migrate config-setup post-migration hooks and ensure that any hooks with the same filename in newly installed image are not overwritten. It is expected that users install new hooks as per their requirement and not edit existing hooks. Any changes to existing hooks need to be done as part of new image and not post bootup.
DHCP relay MONitor (dhcpmon) keeps track of DORA messages. If DHCP Relay is detected to be not forwarding DORA message, dhcpmon will log such event to syslog. Under the hood dhcpmon keeps counts of clients DR messages, forwarded DR messages, DHCP server OA messages, and forwarded OA messages. dhcpmon will check every 12 sec (configurable) if counts are monotonically increasing and record snapshot of those counters. dhcpmon will report discrepancies when detected between current counters and snapshot counters. pull-request: sonic-net#3886 signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
…status running in various SONiC containers. (sonic-net#3940) * Add a monit config file for teamd container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file in teamd container into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for snmp container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of snmp container into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for dhcp_relay container in the dir base_image_files. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of dhcp_relay container into base image under /etc/monit/conf.d. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for router advertiser container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of router advertiser contianer into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Pmon] Add a monit config file for pmon container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Pmon] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Add a monit config file for lldp container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Add a monit config file for BGP container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Add a copy mechanism to put monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Add a monit config file for the swss container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Add a copy mechanism to put monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on barefoot platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-centec] Add a monit config file for syncd container on centen platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on centen platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit conifg file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell-armhf. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on nephos. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Add a monit config file for sflow container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Add a copy mechanism to put the monit conifg file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Add a monit config file for telemetry container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Add a monit config file for database container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Dhcprelay] Change a typo. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Dhcprelay] Change the process name in monit config file to dhcrelay. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no desserve process in syncd container on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process desserve in syncd container on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process named desserve in syncd on centec. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process named desserve in syncd on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Should not delete the process desserve in syncd container on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on marvell-armhf. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Radv] Change the process name to radvd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Correct a typo in monit_telemetry. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-teamd] Delete the monit config file for teamd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-teamd] Delete the mechanism to copy the monit config file into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-dhcprelay] Delete the monit config file for dhcp_relay container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-dhcprelay] Delete the mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-radv] Delete the monit config file foe radv container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-radv] Delete the mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] change the monit config file for BGP container such that monit only generates alert if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-snmp] Change the monit config file for snmp container such that monit only generates alret if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Change the monit config file for pmon container such that monit only generates alert if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Change the monit config file for lldp container such that monit only generates alerts if some processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Delete the monit config file for pmon container since some of processes are not running depended on the type of box. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Delete the copy mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Change the matching name for the process lldpd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Change the monit config file for swss container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on barefoot such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Correct a typo in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on broadcom such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on cavium such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell-arm64 such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell-armhf such that monit will generate alert if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on mellanox such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sycnd] Change the monit config file for syncd container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Change the monit config file for sflow container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Change the monit config file for telemetry container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Change the monit config file for database container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Use 4 spcess to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Use 4 spaces to replace 2 space in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-snmp] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on centec. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to repalce 2 spaces in the monit config file on nephos. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Remove the trailing extra spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
… files (sonic-net#3973) This is an addendum to sonic-net#3958, which also instructs apt to ignore the "Valid Until" date in Release files inside the slave containers, making a complete solution, much like the previously abandoned PR sonic-net#2609. This patch also unifies file names and contents. When the Debian team archives a repo, it stops updating the "Valid Until" date, thus apt-get will not apply updates for that repo unless we explicitly tell it to ignore the "Valid Until" date. Also, this has become an issue with active (i.e., non-archived) repos twice in the past year because the Debian folks seem to occasionally let the expiration lapse before updating the date. This will cause SONiC builds to fail with a message like E: Release file for http://debian-archive.trafficmanager.net/debian-security/dists/jessie/updates/InRelease is expired (invalid since 3d 3h 11min 20s). Updates for this repository will not be applied. until the dates have been updated and propagated to all mirrors. With this patch, SONiC should no longer be affected by lapsed "Valid Until" dates, whether they be accidental or purposeful.
…onic-net#3974) * [Monit] Change the monitoring period of monit from 120 seconds to 60 seconds and also at the same time double the interval for existing sonic monit config file in host. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
…#4018) Provide build option for RESTAPI docker
…c-net#4027) * Fix bgpcfgd error. Previously subscribers were notified before all dependencies were ready
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
743, 754, 773, 784
Update rules for frr package. Update frr submodule
Updating the startsecs=5sec for teamsyncd to make the time for which the process needs to stay up before declaring the startup successfull.
* Changes in sonic-buildimage for the NAT feature - Docker for NAT - installing the required tools iptables and conntrack for nat Signed-off-by: kiran.kella@broadcom.com * Add redis-tools dependencies in the docker nat compilation * Addressed review comments * add natsyncd to warm-boot finalizer list * addressed review comments * using swsscommon.DBConnector instead of swsssdk.SonicV2Connector * Enable NAT application in docker-sonic-vs
- move single instance services into their own folder - generate Systemd templates for any multi-instance service files in slave.mk - detect single or multi-instance platform in systemd-sonic-generator based on asic.conf platform specific file. - update container hostname after creation instead of during creation (docker_image_ctl) - run Docker containers in a network namespace if specified - add a service to create a simulated multi-ASIC topology on the virtual switch platform Signed-off-by: Lawrence Lee <t-lale@microsoft.com> Signed-off-by: Suvarna Meenakshi <Suvarna.Meenaksh@microsoft.com>
…se new DBConnector (sonic-net#3923) * [MultiDB] (./dockers dirs): replace redis-cli with sonic-db-cli and use new DBConnector * remove unnecessary quota * update typo
* SAI implementation 1.15.5 (headers 1.5.1) * SDK 4.3.2908 * FW xx.2000.2720 Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
…e. (sonic-net#4033) Since the syncd process running on different platforms will have the different full path names, we change the full path name of process syncd in the monit config file such that it will be universal and is not for a specific vendor. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
…onic-db-cli and use new DBConnector (sonic-net#4035) * [MultiDB] (except ./src and ./dockers dirs): replace redis-cli with sonic-db-cli and use new DBConnector * update comment for a potential bug * update comment * add TODO maker as review reqirement
Signed-off-by: Guohan Lu <lguohan@gmail.com>
setup ntp server to do the test Signed-off-by: Guohan Lu <lguohan@gmail.com>
…e minigraph (sonic-net#4222) - Changes to minigraph.py to parse minigraph.xml of a multi asic platform - Changes to portconfig.py to parse additional column "asic_port_name" in port_config.ini - Add a new option -n to sonic-cfggen for multi asic platforms - Add unit tests for config generation for multi asic platforms Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com> Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
[configdb.py]: Allow deletion of entire table from mod_config API. (#61) [MultiDB] mimic redis-dump-load , adding sonic_db_dump_load.py and so… [MultiDB] add sonic-db-cli PING all instances support (#65) Fix sonic-db-cli script to be compatible with python3 and python2.7 (#66) Namespace support in SonicV2Connector (#63) [Multiasic]: Add calculation of interface index for backplane interfa…
Signed-off-by: Shlomi Bitton <shlomibi@mellanox.com>
…orms (sonic-net#4488) - change the references to 'type' field to 'sub_role' - change the references to 'InternalFrontend' and 'InternalBackend' to 'FrontEnd' and 'BackEnd' respectively - add a statement to reflect route-reflector for backend asics - add a change to set "next-hop-self force" configuration for internal BGP session in multi asic platform. Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
…up all (sonic-net#4547) Issue was key not correct to look into self.peer. It need to be tuple of (vrf,nbr). Updated for both add/del
Dynamic threshold setting changed to 0 and WRED profile green min threshold set to 250000 for Tomahawk devices Changed the dynamic threshold settings in pg_profile_lookup.ini Added a macro for WRED profiles in qos.json.j2 for Tomahawk devices Necessary changes made in qos.config.j2 to use the macro if present Signed-off-by: Neetha John <nejo@microsoft.com>
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
…f first boot into new image (sonic-net#4538)
…et#3945) 1. ebtables -t filter -A FORWARD -p 802_1Q --vlan-encap 0806 -j DROP The ARP packet with vlan tag can't match the default rule. Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
[Vnet] Fix NameError for 'swsssdk' and align output (sonic-net#902) [config] Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (sonic-net#904) Improved route_check tool and adopt to 20191130 image. (sonic-net#898)
sonic-net#4477) * Multi DB with namespace support, Introducing the database_global.json file for supporting accessing DB's in other namespaces for service running in linux host * Updates based on comments * Adding the j2 templates for database_config and database_global files. * Updating to retrieve the redis DIR's to be mounted from database_global.json file. * Additional check to see if asic.conf file exists before sourcing it. * Updates based on PR comments discussion. * Review comments update * Updates to the argument "-n" for namespace used in both context of parsing minigraph and multi DB access. * Update with the attribute "persistence_for_warm_boot" that was added to database_config.json file earlier. * Removing the database_config.json file to avioid confusion in future. We use the database_config.json.j2 file to generate database_config.json files dynamically. * Update the comments for sudo usage in docker_image_ctrl.j2 * Update with the new logic in PING PONG tests using sonic-db-cli. With this we wait till the PONG response is received when redis server is up. * Similar changes in swss and syncd scripts for the PING tests with sonic-db-cli * Updated with a missing , in the database_config.json.j2 file, Do pip install of j2cli in docker-base-buster.
Support load_minigraph command for multi NPU platform
Reverted Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (sonic-net#904) as it dependent of sonic-net#903 which is not marked to cherry-pick for 201911. Need to add that before we can use this.
… futures (sonic-net#4575) Signed-off-by: Guohan Lu <lguohan@gmail.com>
…onic-net#4571) - mgmt buffer issue on 400G port - high CPU utilization issue caused by some counter reading
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 25, 2021
sonic-net#5849) Submodule updates include the following commits. Also adding sonic-swsscommon build dependencies where necessary. * src/sonic-py-swsssdk 1ea30d2...9d9f0c6 (1): > [SonicV2Connector] make decode_responses=True as default, so python2 application need no code change when migrated to python3(#93) * src/sonic-snmpagent 6e4a796...57e54d9 (3): > Interact with Redis by str instead of bytes, migrate to SonicV2Connector with `decode_responses=True` (#171) > Add a test case for LLDP_LOC_CHASSIS.lldp_loc_man_addr has only one IPv6 address (#167) > [LLDP]: Update init_db to load global database config (#166) * src/sonic-utilities acfa824...b693cf6 (11): > Remove SKU create pytest output directory before execution of the script (sonic-net#1226) > [show][techsupport][multi-ASIC] Add support to collect tech support on multi ASIC platform (sonic-net#1193) > [show] Fix `show ip bgp sum` (sonic-net#1194) > [sonic_sku_create] Move tests from sonic-utilities-tests/ folder to tests/ folder (sonic-net#1222) > Replace swsssdk.SonicV2Connector with swsscommon.SonicV2Connector (SWIG wrapper of C++ implementation) in production code (sonic-net#1217) > Copy missing values from INIT_CFG to config_db as part of db_migration task (sonic-net#1209) > [connect][clear] Support --devicename option for connect/clear line commands (sonic-net#1214) > [consutil][show] Remove root need from show line command (sonic-net#1218) > [Mellanox] SKU creator Tool (sonic-net#1163) > SONiC installer - fix string formatting during image type check (sonic-net#1197) > [show/fgnhg.py] Fix whitespace issues (sonic-net#1211)
mudsut4ke
pushed a commit
that referenced
this pull request
Mar 16, 2021
This PR updates the following commits c6b642b [ci]: download from sonic-buildimage.vs artifact (#168) e76ecc6 [sonic_y_cable] add support for retrieving firmware info for Y cable, internal and nic temperature and voltage (#162) f9cf8c9 [GitHub] Add pull request template (#167) c31636e [ci] Call pip2/3 using sudo (#166) 5521f67 [ci] Test and build packages using Azure Pipelines (#164) faca35c [ci]: Set up CI with Azure Pipelines Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
mudsut4ke
pushed a commit
that referenced
this pull request
Apr 2, 2021
this PR updates the following commits in sonic-platform-daemons 260cf2d [xcvrd] change firmware information fields name inside MUX_CABLE_INFO table for Y cable (#165) cfa600f [thermalctld] Initialize fan led in thermalctld for the first run (#167) 8509f43 [thermalctld] Refactor to allow for greater unit test coverage; Add more unit tests (#157) 70f4e7b [syseepromd] Update warning message to be more informative (#160) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
jerseyang
pushed a commit
that referenced
this pull request
Jun 4, 2021
This PR updates the following commits c6b642b [ci]: download from sonic-buildimage.vs artifact (#168) e76ecc6 [sonic_y_cable] add support for retrieving firmware info for Y cable, internal and nic temperature and voltage (#162) f9cf8c9 [GitHub] Add pull request template (#167) c31636e [ci] Call pip2/3 using sudo (#166) 5521f67 [ci] Test and build packages using Azure Pipelines (#164) faca35c [ci]: Set up CI with Azure Pipelines Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
jerseyang
pushed a commit
that referenced
this pull request
Jun 4, 2021
this PR updates the following commits in sonic-platform-daemons 260cf2d [xcvrd] change firmware information fields name inside MUX_CABLE_INFO table for Y cable (#165) cfa600f [thermalctld] Initialize fan led in thermalctld for the first run (#167) 8509f43 [thermalctld] Refactor to allow for greater unit test coverage; Add more unit tests (#157) 70f4e7b [syseepromd] Update warning message to be more informative (#160) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)