Merge pull request #828 from danielpeter/devel

updates version number
SPECFEM · Nov 27, 2023 · 996274e · 996274e
2 parents 0cdb66f + d2d3511
commit 996274e
Show file tree

Hide file tree

Showing 12 changed files with 29 additions and 26 deletions.
diff --git a/VERSION b/VERSION
@@ -1 +1 @@
-8.0.0
+8.1.0
diff --git a/configure b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.71 for Specfem3D_Globe 8.0.0.
+# Generated by GNU Autoconf 2.71 for Specfem3D_Globe 8.1.0.
 #
 # Report bugs to <see the wiki>.
 #
@@ -609,8 +609,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='Specfem3D_Globe'
 PACKAGE_TARNAME='Specfem3DGlobe'
-PACKAGE_VERSION='8.0.0'
-PACKAGE_STRING='Specfem3D_Globe 8.0.0'
+PACKAGE_VERSION='8.1.0'
+PACKAGE_STRING='Specfem3D_Globe 8.1.0'
 PACKAGE_BUGREPORT='see the wiki'
 PACKAGE_URL=''
 
@@ -1499,7 +1499,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures Specfem3D_Globe 8.0.0 to adapt to many kinds of systems.
+\`configure' configures Specfem3D_Globe 8.1.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1565,7 +1565,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of Specfem3D_Globe 8.0.0:";;
+     short | recursive ) echo "Configuration of Specfem3D_Globe 8.1.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1740,7 +1740,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-Specfem3D_Globe configure 8.0.0
+Specfem3D_Globe configure 8.1.0
 generated by GNU Autoconf 2.71
 
 Copyright (C) 2021 Free Software Foundation, Inc.
@@ -2130,7 +2130,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by Specfem3D_Globe $as_me 8.0.0, which was
+It was created by Specfem3D_Globe $as_me 8.1.0, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   $ $0$ac_configure_args_raw
@@ -12220,7 +12220,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by Specfem3D_Globe $as_me 8.0.0, which was
+This file was extended by Specfem3D_Globe $as_me 8.1.0, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -12292,7 +12292,7 @@ ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config='$ac_cs_config_escaped'
 ac_cs_version="\\
-Specfem3D_Globe config.status 8.0.0
+Specfem3D_Globe config.status 8.1.0
 configured by $0, generated by GNU Autoconf 2.71,
   with options \\"\$ac_cs_config\\"
 

diff --git a/doc/USER_MANUAL/03_running_the_mesher.tex b/doc/USER_MANUAL/03_running_the_mesher.tex
@@ -271,6 +271,8 @@ \chapter{Running the Mesher \texttt{xmeshfem3D}}\label{cha:Running-the-Mesher}
 for global crust/mantle 3D models GLAD-M25 and GLAD-M15.
 Please see folder \texttt{DATA/gladm25} for further information on how to install the corresponding model files.
 %
+\item [{\texttt{EMC\_model}}] Reads in an IRIS EMC model provided by the user. For more details how to compile and setup the code, please see the README info in folder \texttt{DATA/IRIS\_EMC/}.
+%
 \end{description}
 %%
 for Mars:

diff --git a/doc/USER_MANUAL/04_running_the_solver.tex b/doc/USER_MANUAL/04_running_the_solver.tex
@@ -40,25 +40,17 @@ \chapter{Running the Solver \texttt{xspecfem3D}}\label{cha:Running-the-Solver}
 For any particular earthquake, the \texttt{CMTSOLUTION} file that
 represents the point source may be obtained directly from the Global Centroid-Moment Tensor (CMT) \href{www.globalcmt.org}{web page}.
 It looks like this:
-
-\begin{lyxcode}
-{\small }%
 \begin{figure}[H]
-\noindent \begin{centering}
-{\small \includegraphics[width=1\textwidth]{figures/Denali_CMT.pdf} }
-\par\end{centering}{\small \par}
-
+\begin{center}
+\includegraphics[width=1\textwidth]{figures/Denali_CMT.pdf}
+\end{center}
 \caption{\texttt{CMTSOLUTION} file obtained from the Global CMT catalog. The
 top line is the initial estimate of the source, which is used as a
 starting point for the CMT solution. \textbf{M} is the moment tensor,
 $M_{0}${\small{} }is the seismic moment, and $M_{w}$ is the moment
 magnitude.}
-
-
 \label{fig:CMTSOLUTION-file}
 \end{figure}
-{\small \par}
-\end{lyxcode}
 The \texttt{CMTSOLUTION} should be edited in the following way:
 
 \begin{itemize}

diff --git a/doc/USER_MANUAL/authors.tex b/doc/USER_MANUAL/authors.tex
@@ -89,6 +89,7 @@ \section*{Authors}
 Leif Strand,
 Kai Tao,
 Carl Tape,
+Julien Thurin,
 Jeroen Tromp,
 Seiji Tsuboi,
 Eduardo Valero Cano,

diff --git a/doc/USER_MANUAL/copyright_and_version.tex b/doc/USER_MANUAL/copyright_and_version.tex
@@ -18,6 +18,10 @@ \chapter*{Copyright}\label{cha:Copyright}
 \noindent
 \textbf{\underline{Evolution of the code:}}\newline
 
+ version 8.1, November 2023:
+   Daniel Peter, Julien Thurin, Lucas Sawade.
+      adds EMC model support; minor fixes and code improvements; updates ADIOS2 and LIBXSMM calls.\newline
+
  version 8.0, March 2023:
    Wolfgang Bangerth, Stephen Beller, Ebru Bozdag, Caio Ciardelli, Congyue Cui, Armando Espindola-Carmona,
    Rene Gassmoeller, Sunny Gogar, Leopold Grinberg, Elodie Kendall, Wenjie Lei, Amanda McPherson, Ridvan Orsvuran,

diff --git a/doc/USER_MANUAL/manual_SPECFEM3D_GLOBE.pdf b/doc/USER_MANUAL/manual_SPECFEM3D_GLOBE.pdf
diff --git a/doc/USER_MANUAL/manual_SPECFEM3D_GLOBE.tex b/doc/USER_MANUAL/manual_SPECFEM3D_GLOBE.tex
@@ -139,7 +139,7 @@
 %
 \author{$\copyright$ Princeton University (USA) and CNRS / University of Marseille (France),\\
 ETH Z\"urich (Switzerland),\\
-Version 8.0
+Version 8.1
 }
 
 % date of last edit

diff --git a/m4 b/m4
diff --git a/setup/adios_xml_files/par_header.xml b/setup/adios_xml_files/par_header.xml
@@ -5,7 +5,7 @@
     <!--*** Solver information ***-->
     <attribute name="code_name"       path="/solver_info" value="SPECFEM3D_GLOBE" type="string"/>
     <attribute name="version_name"    path="/solver_info" value="TIGER"           type="string"/>
-    <attribute name="version_number"  path="/solver_info" value="8.0"             type="string"/>
+    <attribute name="version_number"  path="/solver_info" value="8.1"             type="string"/>
     <!--************************************************************-->
     <!--*** Values read from DATA/Par_file ***-->
     <!-- double precision variables -->

diff --git a/src/specfem3D/specfem3D.F90 b/src/specfem3D/specfem3D.F90
@@ -290,6 +290,10 @@ program xspecfem3D
 ! Evolution of the code:
 ! ---------------------
 !
+! version 8.1, November 2023:
+!   Daniel Peter, Julien Thurin, Lucas Sawade.
+!      adds EMC model support; minor fixes and code improvements; updates ADIOS2 and LIBXSMM calls
+!
 ! version 8.0, March 2023:
 !   Wolfgang Bangerth, Stephen Beller, Ebru Bozdag, Caio Ciardelli, Congyue Cui, Armando Espindola-Carmona,
 !   Rene Gassmoeller, Sunny Gogar, Leopold Grinberg, Quancheng Huang, Elodie Kendall, Wenjie Lei,

diff --git a/src/specfem3D/write_output_SAC.f90 b/src/specfem3D/write_output_SAC.f90
@@ -348,8 +348,8 @@ subroutine write_output_SAC(seismogram_tmp,irec,iorientation,sisname,chn,phi)
 
   ! indicates SEM synthetics
   KUSER0 = 'SY'          ! Network code assigned by IRIS for synthetic seismograms
-  KUSER1 = 'SEM8.0.0'    ! code version 8.0
-  KUSER2 = 'Tiger'       ! year of the tiger: Feb 01 2022 - Jan 21 2023
+  KUSER1 = 'SEM8.1.0'    ! code version 8.1
+  KUSER2 = 'Tiger'       ! version 8 - starts in year of the tiger: Feb 01 2022 - Jan 21 2023
                          ! (chinese zodiac http://en.wikipedia.org/wiki/Chinese_zodiac :)
 
   !KUSER0 = 'PDE_LAT_'          !  A8