- Running xrdp and xrdp-sesman on separate hosts is still supported by this release, but is now deprecated. This is not secure. A future release will replace the TCP socket used between these processes with a Unix Domain Socket, and then cross-host running will not be possible.
- Special thanks for @trishume for contributing code to the RFX codec
- Backgrounds and logos on the login screen can now be zoomed and scaled (#1962)
- Small change for Alpine Linux support (#2005)
- loongarch support (#2057)
- Improved Fail2ban support (#1976)
- Logging is improved for security protocol level decisions (#1974, #1975)
- An unnecessary log error message which is always generated when running neutrinordp has been removed (#2016)
- An incorrect development log message has been fixed (#2074)
- Some informational and error messages written to the console on stdout have been removed or replaced with log messages (#2078 #2080)
- Failure to attach to the memory area shared with xorgxrdp is now logged (#2065)
- A regression in the VNC module logging which might cause a connection to drop out has been identified and fixed (#1989)
- Remote drive redirection now works if printer redirection is also requested by the client (#327)
- Some file names could not be copied from the client to the server over the clipboard. This is now fixed (#1992, #1995)
- A config value has been added which allows copy-pasting of files to work with Nautilus for GNOME 3 versions >= 3.29.92 (#1994, #1996)
- Clipboard now works properly when files can't be read (#1997 #2001)
- (xorgxrdp v0.2.18) The screen is fully refreshed after initialising shared memory which should fix black screen problems like #1964
- An incorrect initialisation reported by @qarmin has been fixed (#1909)
- Some minor memory leaks have been fixed (#2014 #2028)
- A hard hang in chansrv when copying files from the remote system has been addressed (#2032)
- Users can now capitalise username and password on the login screen if required (#2061)
- Some failed size checks in the fastpath code with
--enable-devel-streamcheck
have been addressed (#2066,#2070) - Log level for clipboard restriction has been promoted from DEVEL DEBUG to INFO (#2088)
- A buffer overflow in the RFX codec associated with large screens has been fixed (#2087)
- Some 64-bit packages are removed during the 32-bit CI build process in an attempt to make this more robust (#1985)
- Minor improvements to error checking and logging for file copy-paste (#1996)
- Now uses cppcheck 2.6 for CI builds (#2008)
- Generated systemd unit files now ignored by git (#2006)
- More internal tests (#2015)
- Some unnecessary files have been removed from the distribution (#2030)
- The
which
command in shell scripts has been replaced withcommand -v
(#2067) - Additional unit tests added for
g_file_get_size()
(#1988) - A compiler warning with -O3 on gcc 11.1 has been addressed (#2105)
- An unused declaration for xrdp_wm_drdynvc_up has been removed (#2098)
- The SCP V0 code has been unified, which will make it easier to update and replace (#2011)
- Monitor processing unit tests for existing xrdp_sec function have been added (#1932)
- The librfxcodec has been updated as part of #2087, and also to add stack frames to assemble code to assist debugging
- The
--with-imlib2
option has been added. If xrdp is built with imlib2, the login screen supports more image formats for the background and logo, and better quality zooming and scaling (#1962)
- On-the-fly resolution change requires the Microsoft Store version of Remote Desktop client but sometimes crashes on connect (#1869)
- xrdp's login dialog is not relocated at the center of the new resolution after on-the-fly resolution change happens (#1867)
- Running xrdp and xrdp-sesman on separate hosts is still supported by this release, but is now deprecated. This is not secure. A future release will replace the TCP socket used between these processes with a Unix Domain Socket, and then cross-host running will not be possible.
- The IP address, port, and user name of NeutrinoRDP Proxy connection are logged in xrdp.log - these connections may not have a sesman log to use (#1873)
- The performance settings for NeutrinoRDP can be now configured (#1903)
- Support for Alpine Linux in startwm.sh (#1965)
- clipboard: log file transfer for the purpose of audit (#1954)
- Client's Keyboard layout now can be overridden by xrdp configuration for debugging purposes (#1952)
- PAM_USER environment variable is not set when using pam_exec module (#1882)
- Allow common channel settings to be overridden for modules as well as chansrv (#1899)
- The text only-copy/paste interface for the VNC module (used only when chansrv is not active) has been improved (#1900)
- The unsupported
tcutils
utility has been removed (#1943) - The quality of TLS logging has been improved (#1926)
- Keyboard information is now passed correctly through NeuutrinoRDP, and can be overridden if required (#1934)
- A message is now logged in the sesman log for unsuccessful login attempts detailing the user used (#1947)
- astyle formatting is now checked during CI builds (#1879)
- Generalise development build options, and add --enable-devel-streamcheck (#1887)
- Now uses cppcheck 2.5 for CI builds (#1938)
- The SCP protocol is now using a standard
struct trans
for messaging rather than its own thing (#1925)
- The
--enable-xrdpdebug
developer option has been replaced with finer-grained--enable-devel-*
options. Consequently, specifying--enable-xrdpdebug
is now an error (#1913)
- On-the-fly resolution change requires the Microsoft Store version of Remote Desktop client but sometimes crashes on connect (#1869)
- xrdp's login dialog is not relocated at the center of the new resolution after on-the-fly resolution change happens (#1867)
- On-the-fly resolution change now supported for Xvnc and Xorg (#448, #1820) - thanks to @Nexarian for this significant first contribution. See the following YouTube video for a demo.
- [Windows] https://youtu.be/cZ0ebieZHeA
- [Mac] https://youtu.be/6kfAkyLUgFY
- xrdp can now use key algorithms other than RSA for TLS (#1776)
- Do not spit on the console 2nd stage (inspired by Debian) #1762
- Unified and improved logging (#1742, #1767, #1802, #1806, #1807, #1826, #1843) - thanks to @aquesnel for this detailed work.
- Other logging level fixes (#1864)
- chansrv can now work on
DISPLAY=:0
so it can be used with x11vnc/Vino/etc sessions (#1849)
- Fix some regressions in sesman auth modules (#1769)
- Minor manpage fixes (#1787)
- Fix TS_PLAY_SOUND_PDU_DATA to set the correct frequency and duration (#1793)
- Fix password leakage to logs in NeutrinoRDP module (#1872) - thanks to @TOMATO-ONE for reporting.
- cppcheck version for CI bumped to 2.4 (#1771, #1836)
- FreeBSD version for CI bumped to 12-2 (#1804)
- Support for check unit test framework added (#1843, #1860)
- FreeBSD FUSE module now compiles under CI but needs additional work (#1856)
- Compilation support added for additional Debian platforms (#1818)
- Refactoring:-
- Confusing preprocessor macro USE_NOPAM replaced with USE_PAM (#1800)
- Window manager states in xrdp executable now use symbolic constants instead of numbers (#1803)
- Documentation improvements
- KRDC added to client list (#1817)
- Platform support tier added (#1822)
- README file revised (#1863)
- Don't install test+development executables by default (#1858)
These changes are likely to impact operating system package builders and those building xrdp from source.
- (#1843, #1860) This release introduces an additional optional compile-time dependency on the
check
unit test framework. The dependency is recommended when packaging for compile-time tests. - (#1858) The executables
memtest
andtcp_proxy
are no longer copied to the sbin directory on a package install.
- On-the-fly resolution change requires the Microsoft Store version of Remote Desktop client but sometimes crashes on connect (#1869)
- xrdp's login dialog is not relocated at the center of the new resolution after on-the-fly resolution change happens (#1867)
- Allow token sign in without autologon for SSO (#1667 #1668)
- Norwegian keyboard support (#1675)
- Improved config support for chansrv (#1635)
- Unified chansrv, sesman and libxrdp logging (#1633 #1708 #1738) - thanks to @aquesnel
- Support SUSE move to /usr/etc (#1702)
- Parameters may now be specified for user-specified shell (#1270 #1695)
- xrdp executables now allow alternative config files to be specified with -c (#1588 #1650 #1651)
- sesrun improvements (#1741)
- Drive redirection location can now be specified (#1048)
- Now compiles on RISC-V (#1761)
- Additional buffer overflow checks (#1662)
- FUSE support now builds on 32-bit platforms (#1682)
- genkeymap array size conflict fixed (#1691)
- Buffering issue with neutrinordp over a slow link fixed (#1608 1634)
- Various documentation fixes (#1704 #1741 #1755 #1759)
- Prevent PAM info message from causing authentication failure (#1727)
- Cosmetic fixes for minor issues (#1751 #1755 #1749)
- Try harder to clean up socket files on session exit (#1740 #1756)
- xrdp-chansrv become defunct in docker while file copy (#1658)
- Compilation warnings with newer compilers (#1659 #1680)
- Continuation Integration checks on 32-bit platforms now include FUSE support (#1682)
- Continuation Integration builds now default to the Ubuntu Focal platform (#1666)
- FUSE type tidy-ups (#1686)
- Switch from Travis CI to GitHub Actions (#1728 #1732)
- Easier to set up console logging for utilities (#1711)
- VNC multi-monitor support if you are using a suitable Xvnc server #1343
- VNC sessions now resize by default on reconnection if you are using a suitable Xvnc server #1343
- Support Slackware for PAM #1558 #1560
- Support Programmer Dvorak Keyboard #1663
[HEADS UP] The VNC changes are significant. They described in more detail on the following wiki page.
- Fix odd shift key behavior (workaround) #397 #1522
- Fix Xorg path in the document for Arch Linux #1448 #1529
- Fix Xorg path in the document for CentOS 8 #1646 #1647
- Fix internal username/password buffer is smaller than RDP protocol specification #1648 #1653
- Fix possible memory out-of-bounds accesses #1549
- Fix memory allocation overflow #1557
- Prevent chansrv input channels being scanned during a server reset #1595
- Ignore TS_MULTIFRAGMENTUPDATE_CAPABILITYSET from client if fp disabled #1593
- Minor manpage fixes #1611
- CI error fixes
- Introduce cppcheck
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
This is a security fix release that includes fixes for the following local buffer overflow vulnerability.
This update is recommended for all xrdp users.
Thanks to Ashley Newson reporting the vulnerability and reviewing fix.
This release is an intermediate bugfix release. The previous version v0.9.12 has some regressions on drive redirection.
- Fix chansrv crashes with segmentation fault (regression in #1449) #1487
- Drive redirection now supports Guacamole client #1505 #1507
- Prevent a coredump in the event of a corrupted file system #1507
- Resolve double-free in
chansrv_fuse
#1469
- Fix the issue
xrdp --version | less
will show empty output #1471 #1472 - Fix some warnings found by cppcheck #1479 #1481 #1484 #1485
- Add FreeBSD CI test #1466
- Move Microsoft-defined constants into separate includes #1470
- Perform cppcheck during CI test #1493
- Support mousex button 8/9 #1478
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
- Fix "The log reference is NULL" error when sesman startup #1425
- Fix behavior when shmem_id changes #1439
- Make vsock config accept -1 for cid and port #1441
- Cleanup refresh rect and check stream bounds #1437
- Significant improvements in drive redirection #1449
- Fix build on macOS Catalina #1462
- Proprietary microphone redirection via rdpsnd is now default off RDP compatible microphone redirection is on instead #1427
- Skip connecting to chansrv when no channels enabled #1393
- Add openSUSE's pam rules #1442
- Do not terminate xrdp daemon when caught SIGHUP #1319
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
- Suppress output (do not draw screen when client window is minimized) #1330
- Audio input (microphone) redirection compatible with MS-RDPEAI #1369
- Now xrdp can listen on more than one port #1124 #1366
- Fix the issue audio redirection sometimes sounds with long delay #1363
- Check term event for more responsive shutdown #1372
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
- Suppress output (do not draw screen when client window is minimized) #1330
- Audio input (microphone) redirection compatible with MS-RDPEAI #1369
- Now xrdp can listen on more than one port #1124 #1366
- Fix the issue audio redirection sometimes sounds with long delay #1363
- Check term event for more responsive shutdown #1372
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
Thank you for matt335672 contributing to lots of improvements in drive redirection!
- Restrict outbound (server->client) clipboard transfer, configured in
sesman.ini
#1298
- Fix the issue libscp v1 not setting width but height twice #1293
- Fix the issue reconnecting to session causes duplicate drive entries in fuse fs #1299
- Fix default_wm and reconnect_sh refer wrong path after sesman caught SIGUP #1315 #1331
- Shutdown xrdp more responsively #1325
- Improve remote file lookup in drive redirection #996 #1327
- Overwriting & appending to existing files is are now supported #1327
- Add Danish Keyboard #1290
- Put xrdp- prefix to some executables appear in man page #1313
- Replace some URLs from SF.net to xrdp.org #1313
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
From the next release, release cycle will be changed from quarterly to every 4 months. xrdp will be released in April, August, December.
- Disconnection by idle timeout (requires xorgxrdp v0.2.9 or later) #1227
- Glyph cache v2 (fixes no font issue on iOS/macOS/Android client) #367 #1235
- Fix xrdp-chansrv crashes caused in drive redirection #1202 #1225
- Fix build with FDK AAC v2 #1257
- Do not enable RemoteApp if the INFO_RAIL flag is not set (RDP-RDP proxy) #1253
- Add Spanish Latin Amarican keyboard #1237 #1240 #1244
- Dynamic channel improvements #1222 #1224
- Remove some deprecated sesman session types #1232
- Refactoring and cleanups
- FreeRDP 2.0.0-rc4 or later might not able to connect to xrdp due to
xrdp's bad-mannered behaviour, add
+glyph-cache
option to FreeRDP to connect #1266 - Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
We removed TLSv1 and TLSv1.1 from the default config. The current default is TLSv1.2
and TLSv1.3. Users can whenever re-enable these early TLS versions by editing xrdp.
To use TLSv1.3, OpenSSL or LibreSSL must support TLSv1.3. You can know the OpenSSL
or LibreSSL version by xrdp --version
command that compiled with xrdp.
Pulseaudio modules has been removed from xrdp source tree since it is actually independent and not part of xrdp. The repository has been moved to: https://github.com/neutrinolabs/pulseaudio-module-xrdp
If you want to use audio redirection, make sure install the module separately.
- Add TLSv1.3 support #1193
- Ensure unmount redirected drive on fatal X error #1140
- Show more helpful message if xrdp-dis failed #1206
- Pass pulse socket name via environment variable #1198
- Fix xrdp's log path in man page #1168
x11rdp has been removed from xrdp reposiory and stored in the separate repository. Checkout x11rdp repository if you still need x11rdp. In most cases, xorgxrdp can replace x11rdp.
- Fix endianness detection on ppc64el #1082
- Fix a bug xrdp file copy slow #1112 #1132
- Copy the PAM session environment for the reconnect script #1120
- Accept fullpath for DefaultWindowManager, ReconnectScript #1147
- Add PAM support for Arch Linux #1078
- Show OpenSSL version to '--version' CLI option #1096
- Separate x11rdp from xrdp repository #1104
- Support sesrun start xorgxrdp sessions #1108
- Show configure summary when configure is done #1126 #1134 #1137
- Less spit on the console when sesman starts #1142
- Fix memory leaks #1146
- Separate rc script for FreeBSD into xrdp and xrdp-sesman #1153
- Improve documents and helps
- Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
Exclamation mark (!
) has been removed from comment out symbol of config files.
Use number sign (#
) or semicolon (;
) instead. As a result of this change, now
you can use exclamation mark as config value such as in tls_ciphers
.
tls_ciphers=HIGH:!aNULL:!eNULL:!EXPORT:!RC4
See also: #1033
Please note that xrdp still doesn't support macOS officially so far. However, a volunteer is working on macOS compatibility.
- Generate dylibs for macOS #1015
- Add PAM support for macOS #1021
- Make listen check before daemon fork #988
- Fix xrdp sometimes become zombie processes #1000
- Include hostname in sesman password file name #1006 #1007 #1076
- Fix default startwm.sh to use bash explicitly #1009 #1049
- Fix the issue FreeBSD doesn't acknowledge terminated sessions #1016 #1030
- Add Swiss French keyboard #1053
- Improve perfect forward secrecy, explicitly enable ECDHE/DHE #1024 #1052 #1063
- Lots of leak fixes, cleanups and refactoring
- Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
- Fix local denial of service CVE-2017-16927 #958 #979
- Add a new log level TRACE more verbose than DEBUG #835 #944
- SSH agent forwarding via RDP #867 #868 FreeRDP/FreeRDP#4122
- Support horizontal wheel properly #928
- Avoid use of hard-coded sesman port #895
- Workaround for corrupted display with Windows Server 2008 using NeutrinoRDP #869
- Fix glitch in audio redirection by AAC #910 #936
- Implement vsock support #930 #935 #948
- Avoid 100% CPU usage on SSL accept #956
- Add US Dvorak keyboard #929
- Suppress some misleading logs #964
- Add Finnish keyboard #972
- Add more user-friendlier description about Xorg config #974
- Renew pulseaudio document #984 #985
- Lots of cleanups and refactoring
- Audio redirection by MP3 codec doesn't sound with some client, use AAC instead #965
- Accept prefill credentials in base64 form #153 #811
- Indroduce AAC encoder to audio redirection (requires Windows 10 client)
- Fix ocasional SEGV in drive redirection #838
- Fix client's IP addresses in xrdp-sesman.log are always logged as
0.0.0.0
#878 #882 - Fix
ls_background_image
didn't accept full path #776 #853 - Fix misuse of hidelogwindow #414 #876
- Fix WTSVirtualChannelWrite return code #859
- Fix no longer needed socket files remained in the socket dir #812 #831
- Make creating socket path a bit more robust #823
- Add Belgian keyboard #858
- Add a PAM file for FreeBSD #824
- Several refactorings and cosmetic changes
- Windows 10 (1703) shows black blank screen in RemoteFX mode
- This issue is already fixed at Insider Preview build 16273
This release fixes a trivial packaging issue #848 occurred in v0.9.3. The issue only affects systemd systems. This release is principally for distro packagers or users who compile & install xrdp from source.
Users who running xrdp on these systems don't need to upgrade from v0.9.3 to v0.9.3.1.
- Linux systems without systemd
- non-Linux systems such as BSD operating systems
- Log user-friendly messages when certificate/privkey is inaccessible
- Now sesman sets mandatory LOGNAME environment variable #725
- Now sesman ensures socket directory present #801
- Exit with failure status if port already in use #644
- Eliminate some hard coded paths
- Fix glitches with IPv4 struct initialization #803
- Fix some keyboard layout integration (UK, Spanish)
- Fix handle OS when IPv6 disabled #714
- Fix issues around systemd session #778
- Fix protocol error when 32 bit color and non RemoteFX session #737 #804
- Fix sesadmin shows error when no sessions #797
- Fix TLS spins 100% CPU #728
- Fix Xvnc backend disconnects when some data copied to clipboard #755
- Pick up the first section if given section(domain) doesn't match anything #750
- Change xrdp-chansrv log path to include display number
- Optimize startwm.sh for SUSE
- Several cleanups and optimizations
- Windows 10 (1703) shows black blank screen in RemoteFX mode
- RemoteFX codec support is now enabled by default.
- Bitmap updates support is now enabled by default.
- TLS ciphers suites and version is now logged.
- Connected computer name is now logged.
- Switched to Xorg (xorgxrdp) as the default backend now.
- Miscellaneous RemoteFX codec mode improvements.
- Socket directory is configurable at the compile time.
- Parallels client for MacOS / iOS can now connect (audio redirection must be disabled on client or xrdp server though).
- MS RDP client for iOS can now connect using TLS security layer.
- MS RDP client for Android can now connect to xrdp.
- Large resolutions (4K) can be used with RemoteFX graphics.
- Multiple RemoteApps can be opened throguh NeutrinoRDP proxy.
- tls_ciphers in xrdp.ini is not limited to 63 chars anymore, it's variable-length.
- Fixed an issue where tls_ciphers were ignored and rdp security layer could be used instead.
- Kill disconnected sessions feature is working with Xorg (xorgxrdp) backend.
- Miscellaneous code cleanup and memory issues fixes.
- New xorgxrdp backend using existing Xorg with additional modules
- Improvements to X11rdp backend
- Support for IPv6 (disabled by default)
- Initial support for RemoteFX Codec (disabled by default)
- Support for TLS security layer (preferred over RDP layer if supported by the client)
- Support for disabling deprecated SSLv3 protocol and for selecting custom cipher suites in xrdp.ini
- Support for bidirectional fastpath (enabled in both directions by default)
- Support clients that don't support drawing orders, such as MS RDP client for Android, ChromeRDP (disabled by default)
- More configurable login screen
- Support for new virtual channels:
- rdpdr: device redirection
- rdpsnd: audio output
- cliprdr: clipboard
- xrdpvr: xrdp video redirection channel (can be used along with NeutrinoRDP client)
- Support for disabling virtual channels globally or by session type
- Allow to specify the path for backends (Xorg, X11rdp, Xvnc)
- Added files for systemd support
- Multi-monitor support
- xrdp-chansrv stroes logs in
${XDG_DATA_HOME}/xrdp
now
- User's password could be recovered from the Xvnc password file
- X11 authentication was not used