The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38 KHz. The Infrared Receiver can receive signals well within 10 meters. If more than 10 meters , the receiver may not get the signals. We often use the two Twigs-the Infrared Receiver and the Infrared Emitter to work together.
This Library is used for LinkIt ONE only
This library include 2parts, ir send and ir receive.
You can use this function to send a buf:
void Send(unsigned char *dta_buf, unsigned char ifreq);
-
dta_buf[0] len of the buf(not include dta_buf[0])
-
dta_buf[1] start signal high time
-
dta_buf[2] start signal low time
-
dta_buf[3] bit high time
-
dta_buf[4] bit low time
-
dta_buf[5] data lenght(how many byte to send)
-
dta_buf[6] dta_buf[n] : data to send
-
ifreq: frequence, eg:38(means 38k)
Initialize:
IR.begin(int ext_isr_num); // pin to receive
Check Data:
IR.isDta(); // if get data, return 1
Receive Data:
IR.getDta(int *dta);
For more information, please refer to wiki page.
This software is written by loovee luweicong@seeedstudio.com for seeed studio
and is licensed under The MIT License. Check License.txt for more information.
Contributing to this software is warmly welcomed. You can do this basically by
forking, committing modifications and then pulling requests (follow the links above
for operating guide). Adding change log and your contact into file header is encouraged.
Thanks for your contribution.
Seeed Studio is an open hardware facilitation company based in Shenzhen, China.
Benefiting from local manufacture power and convenient global logistic system,
we integrate resources to serve new era of innovation. Seeed also works with
global distributors and partners to push open hardware movement.