This Dockerfile is for building an image of RSP TCP Server, a port of rtl_tcp. This is used for relaying samples from the SDRPlay range of SDR devices to clients over the network.
To run:
docker run -d -p 1234:1234 --privileged -v /dev/bus:/dev/bus --name=rsp-tcp stanback/docker-rsptcpserver
You can pass the following arguments:
-p listen port (default: 1234)
-d RSP device to use (default: 1, first found)
-P Antenna Port select* (0/1/2, default: 0, Port A)
-T Bias-T enable* (default: disabled)
-R Refclk output enable* (default: disabled)
-f frequency to tune to [Hz]
-s samplerate in Hz (default: 2048000 Hz)
-n max number of linked list buffers to keep (default: 500)
-v Verbose output (debug) enable (default: disabled)
-E RSP extended mode enable (default: rtl_tcp compatible mode)
-A AM notch enable (default: disabled)
-B Broadcast notch enable (default: disabled)
-D DAB notch enable (default: disabled)
-F RF notch enable (default: disabled)
-b Sample bit-depth (8/16 default: 8)