-
Notifications
You must be signed in to change notification settings - Fork 0
The TEV Stage Manager
This is the TEV Stage Manager of SuperJSON. When opened, the Main Menu is not visible.
SuperJSON is nice and will automatically load all the TEV Stages into a selection menu located at the top of the manager.
Most of the time, you won't really need to be editing these, but should you add a texture, these will need to be configured accordingly. This section of the Wiki will talk about how TEV Works so you can better understand what you are editing.
Note: SuperJSON will automatically create basic settings for the first TEV Stage if you add a new texture as the "first texture" (by removing all the texture in the material and then adding one again), so there's nothing much for you to worry about unless you're going advanced
TEV stands for Texture Environment Unit. TEV is a rendering engine that uses Input Sources to determine the final colour of a pixel. Many special effects can be achieved using TEV Stages.
Math - and lots of it!
The TEV works with a stage system ranging from one stage (Stage 0) to sixteen stages (Stage 15) enabling lots of effects to be achieved. Every stage has the same options for you to set, but depending on what stage number you're editing, these settings may change!
The TEV Stage Manager allows you to edit all 16 TEV Stages available to your disposal. You can switch TEV Stages by clicking the TEV Stage at the top of the Manager
It's as easy as choosing a TEV Stage marked with (Empty) in the TEV Stage selector.
Note: Default settings will be applied to the new TEV Stage
Pressing the Delete Button will clear out the selected TEV Stage and shift the TEV Stages above it down
Note: Deleted TEV Stages cannot be recovered, so be careful!
For each TEV Stage in the TEV Stage list (Haha programming reference) there are 18 options. Yes, 18 different options. Nine options are for Colour, while the other nine are for Alpha.
There are four Colour Inputs simply labeled with Letters: A | B | C | D
SuperJSON calls these: Colour In A | Colour In B | Colour In C | Colour In D
These four Inputs have the same options available to use.
- ColorPrev
- Use the previous stage's colour
- AlphaPrev
- Use the previous stage's Alpha
- C[0-2]
- Use a Colour Register (Ranges from 0-2)
- A[0-2]
- Use an Alpha Register (Ranges from 0-2)
- TexColor
- Use the Texture's colour channels
- TexAlpha
- Use the Texture's Alpha channels
- RasColour
- Use the Rasterized Colour
- RasAlpha
- Use the Rasterized Alpha
- One
- Use 1
- Half
- Use 0.5
- Konst
- Use a Konst Colour
- Zero
- Use 0
Note: Using Zero means the Input has nothing in it
There are four Alpha Inputs simply labeled with Letters: A | B | C | D
SuperJSON calls these: Alpha In A | Alpha In B | Alpha In C | Alpha In D
These four Inputs have the same options available to use.
- ColorPrev
- Use the previous stage's colour
- AlphaPrev
- Use the previous stage's Alpha
- C[0-2]
- Use a Colour Register (Ranges from 0-2)
- A[0-2]
- Use an Alpha Register (Ranges from 0-2)
- TexColor
- Use the Texture's colour channels
- TexAlpha
- Use the Texture's Alpha channels
- RasColour
- Use the Rasterized Colour
- RasAlpha
- Use the Rasterized Alpha
- One
- Use 1
- Half
- Use 0.5
- Konst
- Use a Konst Colour
- Zero
- Use 0
Note: Using Zero means the Input has nothing in it