From TEIDESAT Project and Hyperspace Canarias
This software is designed as a general purpose cross-platform application for the TeideSat Project. The interface (node-client)
will connect to the local server (python-server) by default or any other remote server (note, for debugging purposes, the
interface can be accessed through the browser).
Its currently implemented features range from:
- Camera analysis
- Satellite tracking
- Sensor monitoring (sensors are not available for all platforms)
- Logging view (mostly for remote server)
- Logging to file (server)
This software was originally designed to run on the emitter and receiver dummies (ground segment validation experiment).The following w1 thermal sensor devices are supported:
- DS18S20
- DS1822
- DS18B20
- DS28EA00
- DS1825/MAX31850K
The humidity and temperature sensor DHT22, I2C sensors and serial GPS(1) are also supported.
(1): to use the GPS the serial port must be open and the GPSD service must be running before the execution of the monitor server:
- Start the serial port: stty -F /dev/ttyAMA0 9600
- Start GPSD: sudo gpsd /dev/ttyAMA0 -F /var/run/gpsd.sock
- 1-wire and I2C interfaces enabled (sudo raspi-config in RBPi)
- Serial interface disabled and SPI interface enabled (sudo raspi-config in RBPi)
- Python 3.4+ with pip3 (apt install python3-pip)
- Install the following python modules (as system modules) and packages:
- Install w1thermsensor package (pip3 install w1thermsensor)
- Install Adafruit Python DHT Sensor Library (pip3 install Adafruit_DHT)
- Install smbus package if not already installed (apt install python3-smbus)
- Install dependencies for some python modules compilation (apt install libffi-dev libsrtp2-dev pkg-config)
- Install media codecs (apt install libavdevice-dev libavfilter-dev libopus-dev libvpx-dev)
- Install aiohttp, aiohttp_index, aiortc and opencv-python packages (pip3 install aiohttp aiohttp_index aiortc opencv-python)
- Install gpsd gpsd-clients and python-gps packages (apt install gpsd gpsd-clients python-gps)
- Install colorama package (pip3 install colorama)
- Install serial and pynmea2 package (pip3 install serial pynmea2)
Note that aiortc can be installed in windows link